Neumann LH 48 Manual

Neumann højttalerstøtte LH 48

Læs gratis den danske manual til Neumann LH 48 (2 sider) i kategorien højttalerstøtte. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 21 anmeldelser. Har du et spørgsmål om Neumann LH 48, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Important safety and mounting instructions

• Have the product mounted by a specialist.

• Due to his/her technical training, know-how and experience as well

as knowledge of relevant provisions, regulations and standards, the

specialist must be able to assess assigned tasks, recognize poten-

tial hazards and ensure appropriate safety measures. The following

safety and mounting instructions are addressed to this specialist.

•

Read and follow the safety and mounting instructions, keep these

instructions and always include them when passing the LH48 on

to third parties.

•

Also read and follow the installation instructions contained in the

operating manual of the mounted loudspeaker.

• When mounting, observe and follow the local, national and interna-

tional regulations and standards.

•

Do not install the LH48 in locations where it is exposed to externally

generated vibrations.

• Always use the original Neumann supplied parts.

•

Mount the LH48 in combination with other accessories from the

Neumann mounting hardware range to loudspeakers with a maxi-

mum weight of 65 kg (143.3 lbs).

Download the PDF file “Hardware Mounting Matrix” from

www.neumann.com. Only combine the Neumann mounting

hardware as specified in the “Hardware Mounting Matrix”.

CAUTION!

Danger of injury and material damage

due to dropping of the loudspeaker/mounting hardware!

Unless the LH48 is properly fastened, the loudspeaker together

with the mounting hardware can drop down.

Have the loudspeaker held by a second specialist who is physi-

cally able to do so. The requirements mentioned earlier also

apply to this specialist.

When mounting the loudspeaker, provide a sufficien additional

protection against dropping.

If you use other M8 bolts than the supplied ones to fasten the LH48

to other Neumann mounting hardware and/or K&M monitor stands,

the loudspeaker together with the mounting hardware can drop

down.

Always use the supplied bolts to fasten the LH 48.

• Fasten the LH 48 to the K&M monitor stand. Use the two bolts C and

fasten them with a torque of 10 Nm (see fi . 1) .

•

Attach the mounting hardware to the LH 48 (see the “Hardware

Mounting Matrix”). Use the two bolts D and fasten them with a

torque of 20 Nm (see fi . 2). Also read and follow the safety and

mounting instructions contained in the operating manual of the

selected mounting hardware.

•

If different mounting positions are possible, choose mounting points

that minimize leverage when the loudspeaker is tilted. As a rule,

this means that the other Neumann mounting hardware is centrally

mounted to the LH48.

•

Attach your loudspeaker to the Neumann mounting hardware. Follow

the safety and mounting instructions of the loudspeaker and the

mounting hardware.

•

Use safety wires to additionally protect the loudspeaker and the

mounting hardware against tipping/dropping. The safety wires, rope

terminations and coupling links must comply in their dimensioning

and condition with the regulations and standards of the country in

which they are used and must reliably prevent tipping/droppin of

a loudspeaker and the attached mounting hardware.

• Make sure that ...

–

the LH48, the K&M monitor stand, the associated mounting hard-

ware and the loudspeaker cannot tip over or drop down, even if

the power or audio cables are pulled;

–

you replace the safety wires and coupling links by new ones when

they have prevented tipping/dropping;

–

you check every 3 months if all screws are properly tightened

and if the LH48, the K&M monitor stand and associated mount-

ing hardware, additional fastening elements, safety wires and

coupling links, as well as the loudspeaker are in proper condition.

In case of any damage or any deviation from the safety and mounting

instructions, immediately dismount the loudspeaker, the LH48 and

the additional mounting hardware used.

Delivery includes

A: 1 x LH48 stand adaptor plate

B: 2 x M6x16 bolts with countersunk Allen key head

C: 2 x M8x20 bolts with countersunk Allen key head

D: 2 x metal washers

E: 2 x M8 nuts

F: 2 x cover caps, PVC

G: 1 x 4 mm Allen key

H: 1 x 5 mm Allen key

Specification

Weight 0.260 kg (0.6 lbs)

Dimensions 4 x 60 x 146 mm (H x W x D)

" x 2

" x 5

" (H x W x D)

Max. load 65.0 kg (143.3 lbs)

Guarantee

For the current terms and conditions of the product guarantee please

visit www.neumann.com.

GEORG NEUMANN GMBH · LEIPZIGER STR. 112 · 10117 BERLIN · GERMANY 10/15 · 549114/A02

TEL +49 (0)30 / 41 77 24-0 · FAX -50 · HEADOFFICE@NEUMANN.COM · WWW.NEUMANN.COM

LH 48

ounting manual

Mounting flange adaptor

Produkt Specifikationer

Mærke:	Neumann
Kategori:	højttalerstøtte
Model:	LH 48

Har du brug for hjælp?

Hvis du har brug for hjælp til Neumann LH 48 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

højttalerstøtte Neumann Manualer

2 September 2024

2 September 2024

2 September 2024

2 September 2024

2 September 2024

2 September 2024

højttalerstøtte Manualer

Nyeste højttalerstøtte Manualer

Sonorous SP 600 Manual

27 Februar 2025

Axis TC1601 Manual

20 Februar 2025

SoundTube SM1290 Manual

20 Februar 2025

Nubert BS-652 Manual

5 Februar 2025

NeoMounts NS-SHELF100 Manual

14 Januar 2025

Sonos Arc Ultra Wall Mount Manual

14 Januar 2025

Omnitronic STS-1 Manual

31 December 2025

Omnitronic EUMO-2 Manual

31 December 2025

Konig & Meyer 24496 Manual

30 December 2025

Bowers Wilkins FS-700 S3 Manual

30 December 2025