Noctua NF-A6x15 5V Manual

Noctua Computer køling komponent NF-A6x15 5V

Læs gratis den danske manual til Noctua NF-A6x15 5V (2 sider) i kategorien Computer køling komponent. Denne vejledning er vurderet som hjælpsom af 35 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 18 anmeldelser. Har du et spørgsmål om Noctua NF-A6x15 5V, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

NOCTUA NF-A6x15 5V

INSTALLATION MANUAL

Scan this code to display

multilingual manuals on

your phone.

Installation

This document includes some instructions for installing,

running and cleaning your NF-A6x15 5V.

Should you encounter any difficulties, please

check the FAQs on our website (faqs.noctua.at)

and don’t hesitate to contact our support team at

support@noctua.at.

Multilingual versions of this manual are available on our

website: www.noctua.at/manuals

Dear customer,

Congratulations on choosing the Noctua NF-A6x15 5V.

We at Noctua always strive to achieve superior quiet cooling

performance regardless of whether it’s a big 200mm fan

or a small 40mm one. That’s why the NF-A6x15 5V sports

many of the features and advanced aerodynamic design

measures of our award-winning larger models, making it

perhaps the most thoroughly optimised 60mm fan on the

market.

Each Noctua fan is double-checked for flawless operation

by our quality control team before it leaves the factory and

I’m confident that you will be able to sense some of the

research, attention and care we’ve put into making this

product.

Enjoy your NF-A6x15 5V!

Yours sincerely,

Roland Mossig, Noctua CEO

Included mounting parts:

If you replace an existing 60mm fan with the NF-A6x15 5V

in devices such as storage or network solutions, it is usually

best to use the screws (or other mounting mechanism)

used for the original fan.

Depending on the application, it may also be possible to

use the supplied mounting screws or silicone anti-vibration

mounts.

Caution: Being a 5V fan, the NF-A6x15 5V can not be run

at 12V and will be damaged when used with typical 12V

power sources such as PC motherboard fan headers.

For installing the fan using the NA-AV2 mounts, please

first pull the F side through the fan’s mounting holes and

then pull the C side through the mounting holes of the

case:

Using the OmniJoin

adaptor set

The supplied OmniJoin™ adaptor set allows you to easily

connect the NF-A6x15 5V to proprietary fan headers if you

want to replace a 60mm fan in devices such as network or

storage solutions.

Please first identify the individual leads of the OmniJoin™

adaptor and the original fan. The OmniJoin™ adaptor uses

black for ground (GND) and red for +5V.

The black lead of the adaptor has to be matched with

the original GND lead and the red adaptor cable with the

original +5V lead. Many fan cables use the same colours

as the OmniJoin™ adaptor, but please note that there is

no guarantee for this, so make sure to correctly identify the

GND and +5V leads of the original fan. Please refer to the

manual that came with the device or contact the device

manufacturer if in doubt.

If the long ends of the mounts are in the way, you can use

scissors to cut them after installation. Note that this will

then make them difficult to reinstall in the future.

NA-EC2

30cm extension cable

4x NA-AV2

anti-vibration mounts

NA-AC7

USB power adaptor cable

OmniJoin™ adaptor set

4x fan screws

After you’ve identified the individual leads, please proceed

with the following steps to install the OmniJoin

adaptor:

Make sure to correctly

identify the GND and

+5V leads of the

original fan!

Cable connectors

GND

+5V

OmniJoin

adaptor

Connector of the original fan

Connection

The NF-A6x15 5V features a standard 3-pin fan connector.

However, please note that the fan can also be connected to

standard 4-pin fan headers.

If you would like to run the fan on USB power sources

such as devices with USB host ports, power banks or USB

power supplies, please use the included NA-AC7 USB

power adaptor cable. Please note that the NA-AC7 must be

used exclusively with the NF-A6x15 5V fan because using

it with other fans bears the risk of damaging sensitive USB

host devices.

If you would like to connect the fan to other fan headers,

please use the supplied OmniJoin™ adaptor set as

described below.

The fan features a short 20cm primary cable in order to

help you minimise cable clutter in typical applications. If

you need a longer cable, please add the supplied 30cm

extension (NA-EC2).

F = fan side C = case side

Produkt Specifikationer

Mærke:	Noctua
Kategori:	Computer køling komponent
Model:	NF-A6x15 5V

Har du brug for hjælp?

Hvis du har brug for hjælp til Noctua NF-A6x15 5V stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Computer køling komponent Noctua Manualer

Noctua NH-D15 Manual

3 Oktober 2025

Noctua NH-D14 Manual

3 Oktober 2025

Noctua NF-A6x15 FLX Manual

5 Juli 2025

Noctua NH-D15 G2 Manual

4 Juli 2025

Noctua NF-A6x15 5V PWM Manual

4 Juli 2025

Noctua NF-A6x15 5V Manual

4 Juli 2025

Noctua NH-D15 chromax.black Manual

9 April 2025

Noctua NF-A14x25 G2 LS-PWM Manual

22 Oktober 2024

Noctua NF-A14x25 G2 PWM Sx2-PP Manual

22 Oktober 2024

Noctua NH-U14S TR4-SP3 Manual

6 Juni 2024

Computer køling komponent Manualer

Nyeste Computer køling komponent Manualer

Zalman CNPS9X ECO DS Manual

3 Januar 2026

Zalman CNPS10X Performa ST Manual

2 Januar 2026

Gamdias Aura GL360 Manual

2 Januar 2026

Asus Prime MR120 ARGB Manual

2 Januar 2026

Gamdias Aura GL240 Manual

1 Januar 2026

Akasa Alucia AK-CC7501BP01 Manual

29 December 2026

Akasa Nero 3 AK-CC4013EP02 Manual

21 December 2025

Akasa Alucia AK-CC1114BP01 Manual

19 December 2025

Thermaltake Pacific C240 DDC Manual

18 December 2025

Silverstone XE02-2011 Manual

18 December 2025