Noctua NF-A6x15 FLX Manual

Noctua Computer køling komponent NF-A6x15 FLX

Læs gratis den danske manual til Noctua NF-A6x15 FLX (1 sider) i kategorien Computer køling komponent. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Noctua NF-A6x15 FLX, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

NOCTUA NF-A6x15 FLX

INSTALLATION MANUAL

Scan this code to display

multilingual manuals on

your phone.

The NF-A6x15 FLX features a short 20cm primary cable

in order to help you minimise cable clutter in typical

applications. If you need a longer cable, please add the

supplied 30cm extension (NA-EC2).

The NF-A6x15 FLX comes with Low-Noise (NA-RC15) and

Ultra-Low-Noise Adaptors (NA-RC13) that allow you to

reduce the fan speed from 3500 to 3050rpm (NA-RC15)

and 2250rpm (NA-RC13) in order to achieve even quieter

operation.

Cleaning and maintenance

In order to maintain maximum performance, please clean

your fans regularly using a duster, slightly moist tissue or

canned air. Please be careful not to use too much force

in order to prevent any damage to the fan. Please don’t

use a vacuum cleaner as this may apply excessive force

to the fan.

In order to ensure flawless operation over many years of

usage, the NF-A6x15 FLX’s premium grade SSO2 bearing

is fully sealed to prevent the entering of fine dust particles.

Please note that the fan is not designed to be taken apart

by the user. Removing the impeller from the frame will

break the sealing of the bearing and results in a loss of

warranty.

Warranty, support and FAQs

Even with high-grade products and strict quality control,

the possibility of defects cannot be eliminated entirely.

Therefore, we aim at providing the highest possible level of

reliability and convenience by offering a warranty period of

6 years and direct, fast and straightforward RMA service.

Should you encounter any problems with your

NF-A6x15 FLX, please don’t hesitate to contact our support

team (support@noctua.at).

Please also consult the FAQ section on our website:

faqs.noctua.at

This document includes some instructions for installing,

running and cleaning your NF-A6x15 FLX.

Should you encounter any difficulties, please

check the FAQs on our website (faqs.noctua.at)

and don’t hesitate to contact our support team at

support@noctua.at.

Multilingual versions of this manual are available on our

website: www.noctua.at/manuals

Dear customer,

Congratulations on choosing the Noctua NF-A6x15 FLX.

We at Noctua always strive to achieve superior quiet cooling

performance regardless of whether it’s a big 200mm fan

or a small 40mm one. That’s why the NF-A6x15 FLX sports

many of the features and advanced aerodynamic design

measures of our award-winning larger models, making it

perhaps the most thoroughly optimised 60mm fan on the

market.

Each Noctua fan is double-checked for flawless operation

by our quality control team before it leaves the factory and

I’m confident that you will be able to sense some of the

research, attention and care we’ve put into making this

product.

Enjoy your NF-A6x15 FLX!

Yours sincerely,

Roland Mossig, Noctua CEO

Included mounting parts:

NA-EC2

30cm extension cable

NA-RC15

Low-Noise Adaptor (L.N.A.)

NA-RC13

Ultra-Low-Noise Adaptor

(U.L.N.A.)

NA-AC1

3:4-pin adaptor cable

4x NA-AV2

anti-vibration mounts

4x fan screws

Installation

If you replace an existing 60mm fan with the NF-A6x15

FLX in devices such as storage or network solutions,

it is usually best to use the screws (or other mounting

mechanism) used for the original fan.

Depending on the application, it may also be possible to

use the supplied mounting screws or silicone anti-vibration

mounts.

For installing the fan using the NA-AV2 mounts, please

first pull the F side through the fan’s mounting holes and

then pull the C side through the mounting holes of the case:

If the long ends of the mounts are in the way, you can use

scissors to cut them after installation. Note that this will

then make them difficult to reinstall in the future.

F = fan side C = case side

Connection

The NF-A6x15 FLX features a standard 3-pin fan connector.

Please note that the fan can also be connected to 4-pin

motherboard fan headers though. If you would like to

connect the fan directly to your power supply, please use

the supplied 3:4-pin adaptor (NA-AC1).

Produkt Specifikationer

Mærke:	Noctua
Kategori:	Computer køling komponent
Model:	NF-A6x15 FLX

Har du brug for hjælp?

Hvis du har brug for hjælp til Noctua NF-A6x15 FLX stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Computer køling komponent Noctua Manualer

Noctua NH-D15 Manual

3 Oktober 2025

Noctua NH-D14 Manual

3 Oktober 2025

Noctua NF-A6x15 FLX Manual

5 Juli 2025

Noctua NH-D15 G2 Manual

4 Juli 2025

Noctua NF-A6x15 5V PWM Manual

4 Juli 2025

Noctua NF-A6x15 5V Manual

4 Juli 2025

Noctua NH-D15 chromax.black Manual

9 April 2025

Noctua NF-A14x25 G2 LS-PWM Manual

22 Oktober 2024

Noctua NF-A14x25 G2 PWM Sx2-PP Manual

22 Oktober 2024

Noctua NH-U14S TR4-SP3 Manual

6 Juni 2024

Computer køling komponent Manualer

Nyeste Computer køling komponent Manualer

Antec Vortex 360 Manual

17 Oktober 2025

Silverstone Hydrogon H90 ARGB Manual

14 Oktober 2025

Silverstone XE04-SP3 Manual

14 Oktober 2025

NOX Hummer X-360 LCD Manual

8 Oktober 2025

Savio NOX 360 MM Manual

8 Oktober 2025

NOX Hummer X-240 LCD Manual

8 Oktober 2025

NOX Hummer M-240 ARGB Manual

8 Oktober 2025

Savio NOX 240 MM Manual

8 Oktober 2025

DeepCool AK500 Manual

3 Oktober 2025

DeepCool AG400 LED Manual

3 Oktober 2025