Noctua NF-A6x15 5V PWM Manual

Noctua Computer køling komponent NF-A6x15 5V PWM

Læs gratis den danske manual til Noctua NF-A6x15 5V PWM (2 sider) i kategorien Computer køling komponent. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Noctua NF-A6x15 5V PWM, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

NOCTUA NF-A6x15 5V PWM

INSTALLATION MANUAL

Scan this code to display

multilingual manuals on

your phone.

Installation

This document includes some instructions for installing,

running and cleaning your NF-A6x15 5V PWM.

Should you encounter any difficulties, please

check the FAQs on our website (faqs.noctua.at)

and don’t hesitate to contact our support team at

support@noctua.at.

Multilingual versions of this manual are available on our

website: www.noctua.at/manuals

Dear customer,

Congratulations on choosing the Noctua NF-A6x15 5V PWM.

We at Noctua always strive to achieve superior quiet

cooling performance regardless of whether it’s a big

200mm fan or a small 40mm one. That’s why the

NF-A6x15 5V PWM sports many of the features and

advanced aerodynamic design measures of our award-

winning larger models, making it perhaps the most

thoroughly optimised 60mm fan on the market.

Each Noctua fan is double-checked for flawless operation

by our quality control team before it leaves the factory and

I’m confident that you will be able to sense some of the

research, attention and care we’ve put into making this

product.

Enjoy your NF-A6x15 5V PWM!

Yours sincerely,

Roland Mossig, Noctua CEO

Included mounting parts:

If you replace an existing 60mm fan with the NF-A6x15

5V PWM in devices such as storage or network solutions,

it is usually best to use the screws (or other mounting

mechanism) used for the original fan.

Depending on the application, it may also be possible to

use the supplied mounting screws or silicone anti-vibration

mounts.

Caution: Being a 5V fan, the NF-A6x15 5V PWM can not

be run at 12V and will be damaged when used with typical

12V power sources such as PC motherboard fan headers.

For installing the fan using the NA-AV2 mounts, please

first pull the F side through the fan’s mounting holes and

then pull the C side through the mounting holes of the

case:

The NF-A6x15 5V PWM comes with a 4-pin PWM fan

connector for PWM based speed control. Please note

that the fan can also be connected to standard 3-pin fan

headers though. When connected to 3-pin fan headers, the

fan will run at full speed.

If you would like to run the fan on USB power sources such

as devices with USB host ports, power banks or USB power

supplies, please use the included NA-AC7 USB power

adaptor cable. Please note that the NA-AC7 must be used

exclusively with the NF-A6x15 5V PWM fan because using

it with other fans bears the risk of damaging sensitive USB

host devices.

If you would like to connect the fan to other fan headers,

please use the supplied OmniJoin™ adaptor set as

described below.

The fan features a short 20cm primary cable in order to

help you minimise cable clutter in typical applications. If

you need a longer cable, please add the supplied 30cm

extension (NA-EC1).

Connection

Using the OmniJoin

adaptor set

The supplied OmniJoin™ adaptor set allows you to easily

connect the NF-A6x15 5V PWM to proprietary fan headers

if you want to replace a 60mm fan in devices such as

network or storage solutions.

Please first identify the individual leads of the OmniJoin™

adaptor and the original fan. The OmniJoin™ adaptor uses

black for ground (GND) and red for +5V.

The black lead of the adaptor has to be matched with

the original GND lead and the red adaptor cable with the

original +5V lead. Many fan cables use the same colours

as the OmniJoin™ adaptor, but please note that there is

no guarantee for this, so make sure to correctly identify the

GND and +5V leads of the original fan. Please refer to the

manual that came with the device or contact the device

manufacturer if in doubt.

If the long ends of the mounts are in the way, you can use

scissors to cut them after installation. Note that this will

then make them difficult to reinstall in the future.

NA-EC1

30cm extension cable

4x NA-AV2

anti-vibration mounts

NA-AC7

USB power adaptor cable

OmniJoin™ adaptor set

4x fan screws

F = fan side C = case side

After you’ve identified the individual leads, please proceed

with the following steps to install the OmniJoin

adaptor:

Make sure to correctly

identify the GND and

+5V leads of the

original fan!

Cable connectors

GND

+5V

OmniJoin

adaptor

Connector of the original fan

NOCTUA NF-A6x15 5V PWM

INSTALLATION MANUAL

Scan this code to display

multilingual manuals on

your phone.

Cleaning and maintenance

In order to maintain maximum performance, please clean

your fans regularly using a duster, slightly moist tissue or

canned air. Please be careful not to use too much force

in order to prevent any damage to the fan. Please don’t

use a vacuum cleaner as this may apply excessive force

to the fan.

In order to ensure flawless operation over many years of

usage, the NF-A6x15 5V PWM’s premium grade SSO2

bearing is fully sealed to prevent the entering of fine dust

particles.

Please note that the fan is not designed to be taken apart

by the user. Removing the impeller from the frame will

break the sealing of the bearing and results in a loss of

warranty.

Step 1

Cut off the connector of the fan that was originally used in

the device. Make sure not to cut the cable directly at the

connector, there should be least 2-3cm of cable left:

2-3cm minimum!

Step 2

Then take one of the supplied cable connectors and insert

the GND lead of the original cable and the black lead of

the OmniJoin

adaptor into the two holes of the cable

connector. Make sure that both leads are fully inserted and

pushed all the way back.

Step 3

Then use flat nose pliers to push down the yellow button

of the cable connector. Make sure that the button is not

jammed and pushed all the way down. If the button

is jammed, push it down from both sides of the cable

connector using the flat nose pliers.

Repeat Step 2 and 3 for the +5V lead.

Warranty, support and FAQs

Even with high-grade products and strict quality control,

the possibility of defects cannot be eliminated entirely.

Therefore, we aim at providing the highest possible level of

reliability and convenience by offering a warranty period of

6 years and direct, fast and straightforward RMA service.

Should you encounter any problems with your

NF-A6x15 5V PWM, please don’t hesitate to contact our

support team (support@noctua.at).

Please also consult the FAQ section on our website:

faqs.noctua.at

After you’ve fixed the original fan’s cable to the OmniJoin™

adaptor using the cable connectors, simply connect the

NF-A6x15 5V PWM to the adaptor in order to use it in your

device.

Produkt Specifikationer

Mærke:	Noctua
Kategori:	Computer køling komponent
Model:	NF-A6x15 5V PWM

Har du brug for hjælp?

Hvis du har brug for hjælp til Noctua NF-A6x15 5V PWM stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Computer køling komponent Noctua Manualer

Noctua NH-D15 G2 Manual

4 Juli 2025

Noctua NF-A6x15 5V PWM Manual

4 Juli 2025

Noctua NF-A6x15 5V Manual

4 Juli 2025

Noctua NH-D15 chromax.black Manual

9 April 2025

Noctua NF-A14x25 G2 LS-PWM Manual

22 Oktober 2024

Noctua NF-A14x25 G2 PWM Sx2-PP Manual

22 Oktober 2024

Noctua NH-U14S TR4-SP3 Manual

6 Juni 2024

Noctua NH-U12S TR4-SP3 Manual

6 Juni 2024

Noctua NH-U12S DX-3647 Manual

6 Juni 2024

Noctua NH-U9 TR4-SP3 Manual

6 Juni 2024

Computer køling komponent Manualer

Nyeste Computer køling komponent Manualer

Thermalright Royal Knight 120 SE Manual

5 Juli 2025

Thermalright Royal Pretor 130 Manual

5 Juli 2025

Asus Prime LC 360 ARGB LCD Manual

5 Juli 2025

Xigmatek Neon Aqua 360 Manual

5 Juli 2025

Daikin EWYQ040CAWP Manual

5 Juli 2025

Gamdias Aura GL360 V2 Manual

5 Juli 2025

Daikin EWAT280B Manual

5 Juli 2025

Enermax Liqmax III 120 Manual

5 Juli 2025

Asus ROG Ryujin III 360 ARGB Extreme Manual

5 Juli 2025

Daikin EWAT390B Manual

5 Juli 2025