Oliveri EE23TU Manual

Oliveri Vask EE23TU

Læs gratis den danske manual til Oliveri EE23TU (4 sider) i kategorien Vask. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Oliveri EE23TU, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

TF 45c August 2013

REMOVE EXCESS SEALANT AND MASKING

Excess sealant must be removed promptly with a suitable clean-up solvent

recommended for use on both the counter/benchtop and stainless steel to ensure

damage does not occur.

PLUMBING & TAPWARE

IMPORTANT - Connections to plumbing should always be done by a licensed plumber.

Fit supplied basket wastes to sink bowls. Install tapware according to manufacturers

instructions.

If 2 or more individual basins/bowls are under-mounted, a minimum distance of 3 ½” (90mm) is required

between the basins/bowls. The counter/benchtop supplier is to determine the support method required.

DO’s

• Clean with soap & water (towel dry)

• Clean along the grain of the Stainless Stee

• Use a soft brush or sponge (old tooth brush)

• Wipe over with a glass cleaner (Windex is very good)

• Polish with a metal polish paste (Autosol / Brasso)

• Use a Liquid cleaner (Bon-Ami or Jiff)

• Use a granulated stainless steel cleaner (Essteele)

DO NOT’s

• NEVER use Steel wool

• Beware of harsh liquid cleaners

• Beware of grit within cloths and mineral deposits within water

• Avoid prolonged exposure to acids from Fruit, Fruit juices, Salts, Spirits, Bleach, Tea-bags

• Avoid prolonged contact with ordinary steel which can rust Tin Cans, Steelwool

• Do not keep harsh (acids or chlorine) chemicals under sink / laundry tub

• Do not leave chlorine/chloride chemicals on stainless steel surface

• Do not leave liquid soaps & cleaners to dry on stainless steel

• Do not use bleaches (White King, Domestos, Clorox)

MATERIALS FOR FITTING THE UNDERMOUNT SINK:

• Oliveri sink includes mounting clips, basket wastes and other

accessories (depending on model).

• These Installation Instructions

• Level to check counter/benchtop & sink is installed level

• Flat head screwdriver (large - to tighten basket wastes)

• Suitable sealant and fastening materials (neutral-cure silicone sealant

and structural epoxy or hardware)

• Masking material to protect counter/benchtop and sink from excess

sealant

• Clamping Mechanism (such as threaded rod and timber bearers)

• Additional Mounting Hardwareifttingintothinnermaterial.The

instructions for bolting the sink require a minimum counter/benchtop

thickness of 25mm / 1”. Different hardware or packing materials will be

needed for thin counters/benchtops.

It is essential that the installation is waterproof and carried out in accordance with these instructions.

Tasman Sinkware will not be held responsible for any damage caused by leakage or faulty installation.

CARE INSTRUCTIONS FOR YOUR OLIVERI STAINLESS STEEL SINK

AVOID CONTACT WITH ROUGH OR DIRTY SURFACES as new polished stainless steel will show scratches!

INSTALLER - PLEASE READ & FOLLOW THESE

INSTALLATION INSTRUCTIONS

Please retain for consumer as care instructions are included

IT IS HIGHLY RECOMMENDED THE ACTUAL SINK BE PRESENT AT TIME OF CUTTING

Any advice, recommendation, information, assistance or service provided by Tasman Sinkware in

relation to goods manufactured by it or their use and installation, is given in good faith and is believed by

Tasman Sinkware to be appropriate and reliable. However, any advice, recommendation, information,

assistance or service is provided by Tasman Sinkware without responsibility or liability.

FOR UNDERMOUNT SINKS

CHECK MODEL

The model number on the sink

packaging must match the model

of sink the customer ordered.

Do not install if incorrect.

AVOID CUTS

The perimeter and punch-outs on

the sink may contain sharp edges.

Handle the sink carefully to avoid

personal injury.

CHECK THE CONDITION

Inspect the sink for any visible

defects. Do not install the sink if

defects are found. Contact your

sink retailer / point of purchase.

AVOID SCRATCHES

Stainless steel can be scratched if proper

care is not taken during installation.

Do wnload cutout

template les

(PDF, & F) DWG DX

from our website.

ASIA PACIFIC DISTRIBUTORS

New Zealand - Dux Industries Ltd

Phone: 0800 367 389

Singapore - Sim Siang Choon

Phone: 6266 6632

Hong Kong - Deacon & Co Ltd

Phone: 2369 6111

NORTH AMERICA

SalesOfce

Tasman Sinkware North America

Corona CA

Email: northamerica@oliverisinks.com

UNITED KINGDOM DISTRIBUTOR

A.C. Toon Ltd

Phone: 01246 223900

Email: sales@actoon.co.uk

AUSTRALIA

HeadOfce&

Manufacturing Plant

Tasman Sinkware Pty Ltd

Regency Park SA

Phone: +61 8 8348 6444

Fax: +61 8 8348 6495

Email: sinkware@tasbuildpro.com.au

www.oliverisinks.com

Tasman Sinkware

is a division of

Fletcher Building

Produkt Specifikationer

Mærke:	Oliveri
Kategori:	Vask
Model:	EE23TU

Har du brug for hjælp?

Hvis du har brug for hjælp til Oliveri EE23TU stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vask Oliveri Manualer

Oliveri FL122 Manual

3 Marts 2025

Oliveri ST-BL1530U Manual

1 September 2024

Oliveri ST-BL1584U Manual

1 September 2024

Oliveri TI70 Manual

1 September 2024

Oliveri LL117 Manual

31 August 2024

Oliveri PR1190U Manual

31 August 2024

Oliveri DZ172 Manual

31 August 2024

Oliveri NP6101TH Manual

31 August 2024

Oliveri PR1181 Manual

31 August 2024

Oliveri SN1050U Manual

31 August 2024

Vask Manualer

Nyeste Vask Manualer

Caple BLAGDON Manual

8 April 2025

Kernau KGS G 4560 1B1D Manual

8 April 2025

BLANCO NAYA 8 S Manual

7 April 2025

Kohler Gilford K-12700 Manual

30 Marts 2025

Sani-Lav ESB2-607L Manual

3 Marts 2025

BLANCO ANDANO 340-U Manual

1 Januar 2025

Hendi 970522 Manual

30 December 2025

Blaupunkt Tesino STG5600CEA Manual

30 December 2025

Deante ZQE N10B Manual

28 December 2024

Deante ZZQZA2513 Manual

28 December 2024