OSD Audio Black SAM300 Manual

OSD Audio Modtager Black SAM300

Læs gratis den danske manual til OSD Audio Black SAM300 (3 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 24 anmeldelser. Har du et spørgsmål om OSD Audio Black SAM300, eller vil du spørge andre brugere om produktet?

Side 1/3
SAM300 SUBWOOFER AMPLIFIER INSTALL GUIDE
SAM300 manual .indd 1 3/25/16 12:42 PM
SAM300 SUBWOOFER AMPLIFIER INSTALL GUIDE
Thank you for purchasing the SAM300 subwoofer amplier. Its tabletop design is compatible with many other popular
electronic devices and multimedia furniture. The SAM300 offers its owner the freedom to use a stand-alone, high quality
amplier to operate a subwoofer speaker system.
FEATURES:
• Low-level, high-level, and LFE inputs
• Mono Class AB output stage for solid, well dened output
• Manual, auto, or triggered on/off modes for integration into any automated system
• Selectable bass boost
• Draws less than 1 watt in stand-by mode
• Heavy-duty steel chassis with brushed aluminum faceplate
Adjustable phase, gain, and crossover
• Pop-out adjustment knobs keep settings from being disturbed easily
• Switchable 120/240V input voltage
INSTALLATION:
The SAM300 is designed to provide high delity subwoofer amplication and is tailored for home audio and home theater
audio systems. It is not recommended for use in DJ, pro sound, or other high-duty-cycle applications. For home audio
systems, use the unit as it comes out of the box. Care should be taken to leave some room for air circulation above the
amplier. Stacked components that utilize rubber or plastic feet should provide adequate clearance in most situations.
FRONT PANEL:
1. Power Switch / Indicator LED
Front panel pushbutton power switch turns the amplier on
and off. When the indicator LED is lit dimly, the amplier is in
standby mode. When the LED is lit brightly, the amplier is
fully active.
2. Phase
Adjustable phase compensation from 0 to 180 degrees.
Corrects phase anomalies that result from differing listening
distances between the subwoofer and main speakers, which
can cause poor acoustic summation around the crossover
point. In most situations the control knob should be left at 0
degrees, but for the advanced user it can be set either by ear
or with the aid of measurement instruments.
3. Frequency
Adjusts the low-pass crossover frequency from 40 Hz to
180 Hz. When using the Left/Right inputs, this adjustment
will allow you to properly integrate the subwoofer with the
satellite or main speakers. It is recommended to experiment
with different settings until the smoothest transition between
subwoofer and speakers is achieved.
4. Gain
Sets the overall level of the amplier, used to match the output
of the subwoofer to the rest of the speakers in the system. If
the source output has a variable control, we recommend that
the user spend a moment or two determining the best balance
between the two controls. When a balance is found between
low noise, linear level control, and sufcient level to drive the
amp to the required output, the gain knob can be considered
to be the “volume control” for the subwoofer system.
SUBWOO FER
AMPLIF IER
SAM300
POWER
PHASE
90¡
180¡
0
5
10
40¡
120¡
180¡Hz
FREQ GAIN
SAM300 manual .indd 2-3


Produkt Specifikationer

Mærke: OSD Audio
Kategori: Modtager
Model: Black SAM300

Har du brug for hjælp?

Hvis du har brug for hjælp til OSD Audio Black SAM300 stil et spørgsmål nedenfor, og andre brugere vil svare dig