OSD Audio XMP500DSP Manual

OSD Audio Modtager XMP500DSP

Læs gratis den danske manual til OSD Audio XMP500DSP (6 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om OSD Audio XMP500DSP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

OWNER’S MANUAL

XMP500DSP

OsdAudio ®

775 Columbia St.,

Brea. CA92821

www.osdaudio.com

XMP500 DSP man. 4/19

Congratulations on your purchase of the OsdAudio ® XMP500DSP.

Please take a few moments to read this entire manual, and be sure to

retain this document for future reference. Please read and observe all

safety instructions detailed on page 2.

NOTE: If any part of this product is damaged or missing, please call your

dealer or OsdAudio ® directly at 562 697 2600.

Please read your warranty and retain your receipt and original carton

for possible future use.

For more information about OsdAudio ® electronics, speakers and

accessories please visit www.osdaudio.com

XMP500DSP

Digital Stereo Power Amplifier

FEATURES:

MAIN / INTERRUPT priority input switching

MAIN auxiliary output

Speaker A/B switching

Front panel Balance and Volume controls

Signal sensing “Power On” and Trigger mode

SPECIFICATIONS

Stereo (8 ohm): N250W per channel, <1% THD+

Stereo (4 ohm): N350W per channel, <1% THD+

Bridged Mono (8 ohm): 700W, 1kHz, <1% THD+N

Frequency Response: 10Hz ~ 30kHz, -2dB/ +1dB

Signal to Noise Ratio: 100dB below 250W output into 8 ohms

w/20kHz Lowpass filter

Channel Separation: 65dB @ 1kHz, referred to 250W output

into 8 ohms

Input Sensitivity: 700mV input for rated 250W output

into 8 ohms

AC Power Consumption: 700W maximum

Net Weight: 9.85lbs / 4.6kgs

Gross Weight: 12.85lbs / 6kgs

2.15”

(55mm)

16.9”(435mm)

11”

(280mm)

Rear mounted treble and bass controls

Bass/Treble Control: +/- 12dB @ 100Hz and 10kHz

13. Unplug the apparatus during lightning storms or when unused for long periods

of time.

14. Refer all servicing to qualified personnel. Servicing is required when the

apparatus has been damaged in any way, such as power supply cord or

plug is damaged, liquid has been spilled or objects have fallen into the

apparatus has been exposed to rain or moisture, does not operate normally,

or has been dropped.

15. WARNING: To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture. The apparatus shall not be exposed to

dripping or splashing and that objects filled with liquids, such as vases,

shall not be placed on apparatus.

16. WARNING: The mains plug/appliance coupler is used as disconnect device,

the disconnect device shall remain readily operable.

17. This equipment is a Class II or double insulated electrical appliance. It

is designed in such a way that it does not require a safety connection

to electrical earth.

18.

- This lightning flash with arrowhead symbol within an equilateral triangle is

intended to alert the user to the presence of non-insulated “dangerous voltage”

within the product’s enclosure that may be of sufficient magnitude to constitute

a risk of electric shock.

- Warning: to reduce the risk of electric shock, do not remove cover (or back) as

there are no user-serviceable parts inside. Refer servicing to qualified personnel

- The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance instructions in the

literature accompanying the appliance.

XMP500DSP

OWNER’S MANUAL

CAUTION

RISK OF ELECTRICAL SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER. NO

USER SE R VICABLE P A R TS INSIDE. REFER SE R VICING TO QUALIFIED PERSONNEL!

IMPOR T ANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. The ventilation should not be impeded

by covering the ventilation openings with items such as newspaper, table-

cloths, curtains etc. Install in accordance with the manufacturer’s instructions.

8. Do not install near heat sources such as radiators, heat registers, stoves,

or other apparatus (including amplifiers) that produce heat. No open flame

sources, such as lighted candles, should be placed on the apparatus.

9. Do not defeat the safety purpose of the polarized or grounding type plug.

A polarized plug has two blades with one wider than the other. A grounding

type plug has two blades and a third grounding prong. The wide blade or

third prong is provided for your safety. If the provided plug does not fit into

your outlet, consult an electrician for replacement of the obsolete outlet.

MAGNETIC FIELD: !!CAUTION!! Do not locate sensitive high-gain equipment such as p r eampliﬁers or tape decks di r ectly above or below the unit. Because

this ampliﬁer has a high power densit y , it has a st r ong magnetic ﬁeld, which can induce hum into unshielded devices that a r e located nearb y . The ﬁeld is

st r ongest just above and below the unit. If an equipment rack is used, we r ecommend locating the ampliﬁer(s) in the bottom of the rack and the p r eampliﬁer

or other sensitive equipment at the top.

EXPLAN A TION OF

SAFETY SYMBOLS

The exclamation point within an equ i lateral triangle is intended to alert the user of the p r esence of important

operating and maintenance (servicing) instructions in the literatur e accompanying the appliance.

The lightning ﬂash with the ar r owhead symbol within an equilateral triangle is intended to alert the user to the

p r esence of uninsulated “dange r ous voltage” within the p r oducts’ enclosu r e that may be of sufﬁcient magnitude

to constitute a risk of electric shock to persons.

10. Protect the power cord from being walked on or pinched particularly at the

plugs, convenience receptacles, and at the point of exit from the apparatus.

11. Only use attacheements/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or

table specified by the manufacturer, or sold with

the apparatus. When a cart or rack is used, use

caution when moving the cart/apparatus

combination to avoid injury from tip-over.

• W ARNING: T O PREVEN T FIRE OR SHOCK HAZARD, DO NO T EXPOSE THIS APPLIANCE T O RAIN OR MOISTURE. THE AP P AR A TUS SHAL L NO T

BE EXPOSED T O DRIPPING OR SPLASHING AND TH A T OBJECTS FILLED WITH LIQUIDS, SUCH AS V ASES, SHAL L NO T BE PLACED

ON AP P AR A TUS .

• WARNING: TO PREVENT FIRE OF SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET

UNLESS THE BLADES CAN BE FUL L Y INSE R TED T O PREVEN T BLADE EXPOSURE .

• W ARNING: THE MAINS PLUG IS USED AS DISCONNEC T DEVICE. THE DISCONNEC T DEVICE SHAL L REMAIN READI L Y AV AILABLE .

• W ARNING: ON L Y USE A T T ACHMENTS OR ACCESSORIES SPECIFIED OR PROVIDED B Y THE MANU F ACTURER .

775 Columbia St.,Brea. CA92821

Produkt Specifikationer

Mærke:	OSD Audio
Kategori:	Modtager
Model:	XMP500DSP

Har du brug for hjælp?

Hvis du har brug for hjælp til OSD Audio XMP500DSP stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager OSD Audio Manualer

OSD Audio XMP500DSP Manual

29 August 2025

OSD Audio Black SAM500 Manual

22 Juli 2025

OSD Audio Nero HTD6150 Manual

20 Juli 2025

OSD Audio SMP200 Manual

20 Juli 2025

OSD Audio Nero HTX6150 Manual

17 Juli 2025

OSD Audio PAX-50 Manual

19 Juni 2025

OSD Audio Nero HTX-8150 Manual

21 Februar 2025

OSD Audio Nero HTX8150 Manual

14 Januar 2025

OSD Audio Nero HTX4150 Manual

14 Januar 2025

OSD Audio NERO MAX8 Manual

1 Januar 2025

Modtager Manualer

Nyeste Modtager Manualer

Extron XPA 2003C-100V Manual

28 August 2025

Atlas Sound HPA-DAC8 Manual

28 August 2025

Atlas Sound HPA4202 Manual

28 August 2025

Extron DA 6AV EQ Manual

28 August 2025

ESX Quantum QM-FOUR Manual

28 August 2025

Extron XPA 1002-70V Manual

28 August 2025

Kenwood DMX4710S Manual

28 August 2025

ESX Quantum QM-TWO Manual

28 August 2025

Extron XPA 1002 Manual

27 August 2025

Wet Sounds Sinister SDX4 Manual

27 August 2025