OSD Audio WSK-100 Manual

OSD Audio Modtager WSK-100

Læs gratis den danske manual til OSD Audio WSK-100 (2 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15 anmeldelser. Har du et spørgsmål om OSD Audio WSK-100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

F C C C O M P L I A N C E W A R R A N T Y

FCC Information:

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

If you cannot eliminate the interference, the FCC requires that you stop

using your product. Changes or modiﬁcations not expressly by the party

responsible for compliance could void the user’s authority to operate the

equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Warranty Information:

All OSD AUDIO electronics have (2) year Limited Warranty against defects in ma-

terials and workmanship. Proof of purchase must accompany all claims. During

the warranty period OSD AUDIO will replace any defective part and correct any

defect in workmanship without charge for either parts or labor

OSD AUDIO may replace returned electronics with a product of equal value and

performance. In such cases, some modications to the mounting may be

necessary and are not OSD AUDIO’s responsibility.

For this warranty to apply, the unit must be installed and used according to its

written instructions. If necessary, repairs must be performed by OSD AUDIO.

The unit must be returned to OSD AUDIO at the owner’s expense and with prior

written permission. Accidental damage and shipping damage are not considered

defects, nor is damaged resulting from abuse or from servicing performed by an

agency or person not specically authorized in writing by OSD Audio

OSD AUDIO sells products only through authorized dealers and distributors

to ensure that customers obtain proper support and service. Any OSD AUDIO

product purchased from an unauthorized dealer or other source, including retail-

ers, mail order dealers and online sellers will not be honored or serviced under

existing OSD AUDIO warranty policy. Any sale of product by an unauthorized

source or other manner not authorized by OSD AUDIO shall void the warranty on

the applicable product.

Damage to or destruction of components due to application of excessive power

voids the warranty on those parts. In these cases, repairs will be made on the

basis of the retail value of the parts and labor. To return for repairs, you must

email customer service at RMA@OSDAUDIO.com for a Returned Merchandise

Authorization (RMA) number then the unit must be shipped to OSD AUDIO at the

owner’s expense, along with a note explaining the nature of service required. Be

sure to pack the product(s) in a corrugated container with at least 3 inches of

resilient material to protect the unit from damage in transit.

This Warranty Does Not Cover: Damage caused by abuse, accident, misuse,

negligence, or improper operation (installation) • Any products that have been

altered or modied • Any product whose identifying number of decal, serial #,

etc. has been altered, defaced or removed • Normal wear and maintenance. OSD Audio | 775 Columbia Street Brea, CA. 92821 | osdaudio.com

WIRELESS SUBWOOFER KIT

USERS GUIDE

P A C K A G E C O N T E N T S S E T U P

S E T U P

● Transmitter ● Receiver

● RCA Cable ● 9V AC Adapter (2)

● Users Guide

Place the transmitter and receiver within 100 feet of each other, on a

ﬂat surface or mounted on a wall.

-OR-

LED Indicator

1. With the audio source off, connect the transmitter to the

subwoofer jack with the RCA cable.

2. Connect the supplied AC adapter (9V, 200mA) to the transmitter

DC IN 9V jack, and then plug it into a standard household outlet.

3. Connect the receiver to your subwoofer with the RCA cable.

4. Connect the supplied AC adapter (9V, 200 mA) to the receiver DC

IN 9V jack, and then plug it into a standard household outlet.

NOTE:

● Use only the supplied AC adapters. Using adapters not designed

for this product may cause damage.

● If you mount the receiver on a wall, do not block the ventilation

slots.

● Unplug the AC adapters from the AC outlet before disconnecting

from the transmitter or receiver.

Using Your Subwoofer Kit

When connected, the transmitter

and the receiver LED’s light green.

When the audio source is active, the

speakers automatically activate, and

the LED’s light blue.

NOTE:

After powering on, if there is no

signal input within 17 minutes, the

subwoofer kit enters standby mode.

Optimize Your System

many surround systems let you

adjust the delay between the front

and rear speakers. To optimize your

setup, adjust the rear speaker delay

response by about 20 milliseconds.

Changing Channels

If you experience any interference,

press and hold the button on both M

units. The units will automatically

match up.

S P E C I F I C A T I O N S

Features:

● 2.4GHz digital wireless link provides crystal clear audio.

● 34-channel selection.

● Up to 100 feet (30.5m) operation distance between transmitter and

receiver (line of sight).

Specs:

Audio Output Level 2V

Frequency Response 20-200Hz

Audio Distortion <1%

Signal to Noise Ratio >80dB

Speciﬁcations are subject to change and improvement without

notice. Actual product may vary from the images found in this

document.

Produkt Specifikationer

Mærke:	OSD Audio
Kategori:	Modtager
Model:	WSK-100

Har du brug for hjælp?

Hvis du har brug for hjælp til OSD Audio WSK-100 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Modtager OSD Audio Manualer

OSD Audio Nero HTX-8150 Manual

21 Februar 2025

OSD Audio Nero HTX8150 Manual

14 Januar 2025

OSD Audio Nero HTX4150 Manual

14 Januar 2025

OSD Audio NERO MAX8 Manual

1 Januar 2025

OSD Audio HTD4150 Manual

27 December 2024

OSD Audio SMP1000 DSP Manual

27 December 2024

OSD Audio Black THEATRO X11 Manual

4 December 2024

OSD Audio Black SAM300 Manual

3 December 2024

OSD Audio Nero HTD8150 Manual

3 December 2024

OSD Audio SMP100 Manual

3 December 2024

Modtager Manualer

Nyeste Modtager Manualer

Diamond Audio MICRO85U Manual

16 Juni 2025

Planet Audio MB2000.1D Manual

16 Juni 2025

Planet Audio MB2200.5D Manual

16 Juni 2025

Ecler AURA-4B900 Manual

16 Juni 2025

Ecler AURA-2B900 Manual

15 Juni 2025

Planet Audio PSX26 Manual

15 Juni 2025

Planet Audio AC1200.2 Manual

15 Juni 2025

Planet Audio AC2400.4 Manual

15 Juni 2025

Planet Audio AC2600.2 Manual

15 Juni 2025

Planet Audio PL1500.1M Manual

15 Juni 2025