Panduit CT-260 Manual

Panduit Ikke kategoriseret CT-260

Læs gratis den danske manual til Panduit CT-260 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Panduit CT-260, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

CT-260

CRIMPING TOOL

OPERATION INSTRUCTIONS

Page: 1 of 2

PA24429A01

REV.: 03 6-2018

OPERATION INSTRUCTIONS

CT-260

Technical Support:

1-800-777-3300

E-mail:

techsupport@panduit.com

See product packaging or contact Customer Service for

UL/CSA approved tooling/product combination.

CAUTION:

Verify power is “OFF” before working on wiring with this tool.

The plastic grips are for the user’s comfort,

and are not intended to insulate against electrical shock

while working on live electrical circuits.

NON-INSULATED AND INSULATED

PARALLEL SPLICE

INSTRUCTIONS

1. Insert stripped wire into each end of the

parallel splice. (See product packaging

for proper strip lengths.)

2. Locate parallel splice in proper crimp

pocket.

3. Position crimp pocket on the center of

the metal barrel.

4. Squeeze handles firmly.

WIRE CUTTER for No. 10 AWG and

smaller copper wire.

CRIMP POCKETS for Pan-Term

insulated and non-insulated terminals,

disconnects, wire joints and splices on No.

22 to 10 AWG solid or stranded wire.

This tool is made of hardened steel and is

protected with a light coat of oil.

CRIMP POCKET

NON-INSULATED

INSULATED

www.panduit.com

NON-INSULATED BUTT SPLICE

INSTRUCTIONS

1. Insert stripped wire into end of the butt

splice to internal wire stop. (See product

packaging for proper strip lengths.)

2. Locate butt splice in proper non-

insulated crimp pocket.

3. Position crimp pocket on the center of

the metal barrel half with wire inserted.

4. Squeeze handles firmly.

5. Repeat for other end of butt splice.

INSULATED BUTT SPLICE

INSTRUCTIONS

1. Insert stripped wire into end of the butt

splice to internal wire stop. (See product

packaging for proper strip lengths.)

2. Locate butt splice in proper insulated

crimp pocket.

3. Position crimp pocket on the center of

the metal barrel half with wire inserted.

4. Squeeze handles firmly.

5. Close insulation if desired.

6. Repeat for other end of butt splice.

CRIMP POCKET

Produkt Specifikationer

Mærke:	Panduit
Kategori:	Ikke kategoriseret
Model:	CT-260

Har du brug for hjælp?

Hvis du har brug for hjælp til Panduit CT-260 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Panduit Manualer

Panduit VS2-NET Manual

29 November 2025

Panduit PWBCB12 Manual

18 November 2025

Panduit NCMHF1 Manual

31 Oktober 2025

Panduit CEG-13X1 Manual

9 Oktober 2025

Panduit PR2HF1 Manual

9 Oktober 2025

Panduit C2FAB07A1200B1 Manual

8 Oktober 2025

Panduit CEST1-D3 Manual

8 Oktober 2025

Panduit CBEWHY Manual

8 Oktober 2025

Panduit CEG-05X2 Manual

8 Oktober 2025

Panduit CEST2-A6 Manual

8 Oktober 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

BEKO DVS15022W Manual

7 December 2025

Opticis OPS-xyz Manual

7 December 2025

Opticis BR-500 Manual

7 December 2025

Opticis DPOC-14N Manual

7 December 2025

Zotac GAMING GeForce RTX 5060 Twin Edge Manual

7 December 2025

FiiO BR15 R2R Manual

7 December 2025

Fostex FE83NV2 Manual

7 December 2025

Fostex EN15 Manual

7 December 2025

Advantech iDAQ-731D Manual

7 December 2025

Bosch MAF462C0 Manual

7 December 2025