Panduit MTRTH Manual

Panduit Ikke kategoriseret MTRTH

Læs gratis den danske manual til Panduit MTRTH (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 58 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 29.5 anmeldelser. Har du et spørgsmål om Panduit MTRTH, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

MTRTH & MTRTLS: PA25279A01_02 Page: 1 of 8 4-2009

MTRTH and MTRTLS PA25279A01

Rev. 02 4-2009

MRT and MRS METAL CABLE TIE RETAINED TENSION INSTALLATION TOOLS

OPERATION INSTRUCTIONS

INTRODUCTION

The MTRTH Retained Tension Installation Tool is used for installing PANDUIT MRT and MRS Ball Lock

Ties in widths of 5/16” (7.9mm) Heavy (H) cross-sections.

The MTRTLS Retained Tension Installation Tool is used for installing PANDUIT MRT and MRS Ball Lock

Ties in widths of 3/16” (4.6mm) Standard (S) cross-sections. Included with this tool is an anvil, which can

be changed for installing MRT and MRS ties in widths of 1/4” (6.4mm) Light-Heavy (LH) cross-sections.

Changeover Kits are available (listed on Page 7), which allow installation of all three cross-sections of

MRT and MRS Ties with either tool.

Note: This tool is not intended for other uses such as cutting or tensioning other types of

fastening devices.

SAFETY PRACTICES

ALWAYS wear safety glasses when using this tool.

DO NOT place fingers near cutting blade during tool actuation.

Fingers may be pinched or injured by cutter blade.

DO NOT use tool on live electrical sources.

TOOL FEATURES

A. Ball Set / Cutting Handle Lever

B. Upper Handle

C. Tension Indicator Window

D. Tension Handle

E. Adjustment Knob

F. Tensioning Split Mandrel

G. Detent and Setshear Finger

H. Anvil

NOTE: In the interest of higher quality and

value, PANDUIT products are continually being

improved and updated.

Consequently, pictures may vary from the

enclosed product.

Website: www.panduit.com

E-mail: cs@panduit.com

Technical Support:

See back cover for contact

information.

MTRTH and MTRTLS OPERATION INSTRUCTIONS

MTRTH & MTRTLS: PA25279A01_02 Page: 2 of 8 4-2009

MTRTH and MTRTLS TOOL MAINTENANCE

TO INHIBIT CORROSION AND MAINTAIN PERFORMANCE OF THE TOOL, KEEP THE METAL

SURFACES COATED WITH A LIGHT OIL (3-IN-ONE® OR EQUIVALENT).

The tool must be set to the proper tension range based on ties to be installed. Per the above chart, turn

the tension knob, so that mark is aligned with correct setting on Tension Setting Label (see above).

MTRTH and MTRTLS OPERATION INSTRUCTIONS

STEP 1 STEP 2

With the tie surrounding the bundle, insert the end

of the tie into the head/buckle on the tie.

Draw the tie up as tight as possible by hand.

STEP 3

Insert the end of the tie into the tool between Setshear Finger (#1) and Anvil (#2).

STRAP SIZE SETTING

3/16" (4.6mm) S

1/4" (6.4mm) LH

5/16" (7.9mm) H

Tie inserted

in gap here

Produkt Specifikationer

Mærke:	Panduit
Kategori:	Ikke kategoriseret
Model:	MTRTH

Har du brug for hjælp?

Hvis du har brug for hjælp til Panduit MTRTH stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Panduit Manualer

Panduit MIW094 Manual

2 September 2025

Panduit MIW125 Manual

2 September 2025

Panduit PES400 Manual

2 September 2025

Panduit CUCGF06DPW1 Manual

2 September 2025

Panduit CUEFRCKITW1 Manual

2 September 2025

Panduit MIM125 Manual

2 September 2025

Panduit CUSREORCPB1 Manual

2 September 2025

Panduit VS2-AVT-3IB Manual

27 August 2025

Panduit VS-AVT-C08-L10 Manual

27 August 2025

Panduit GPQC07-1/0 Manual

27 August 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Kimo LR 110 Manual

2 September 2025

HMS Premium LPD02 Manual

2 September 2025

AVer E1008 Manual

2 September 2025

Biltema 17-547 Manual

2 September 2025

Groen AH/1E Manual

2 September 2025

ACOPower HY-P30 Manual

2 September 2025

Yamaha True X Speaker 3A WS-X3A Manual

2 September 2025

Globe RG30 Manual

2 September 2025

Deye SUN-6K-SG05LP1-EU-AM2-P Manual

2 September 2025

Neutrik NLT4FXX Manual

2 September 2025