Panduit N82SPS Manual

Panduit Ikke kategoriseret N82SPS

Læs gratis den danske manual til Panduit N82SPS (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Panduit N82SPS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

INSTRUCTIONS CM614A

FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp

-A

CCESS

N-Type Network Cabinets

(Side Panels - N21SPS, N51SPS, N22SPS, N52SPS

)

Page 1 of 2

Side Panel Support Bracket Installation

• Secure Side Panel Support Bracket to cabinet frame with [2] M5 Torx Screws.

[2] M5 Torx Screws

(use T25 Torx bit)

Side Panel Support

Bracket

INSTRUCTIONS CM614A

For Instructions in Local Languages

and Technical Support:

www.panduit.com/resources/install_maintain.asp www.panduit.com

E-mail:

techsupport@panduit.com

Phone:

866-405-6654

Page 2 of 2

Spring Loaded Hinge Pin

(Top and Bottom)

Move Finger Pull into

Slot to Lock Hinge Pin

in OPEN position

(Front Side Panel only)

Rear Side Panel

Front Side Panel

Rear Side Panel

Cover Plate

Plunger

Grommet Front Catch Plate

Front Front

Side Panel Installation

• Rear Side Panel with Bumper Plate to be installed first.

• Remove [2] top Cover Plates of Rear Side Panel by pulling plunger slightly to release Cover Plate. (Bumper Plate will be to center of

cabinet.)

• Tilt the Rear Side Panel and insert [2] bottom Hinge Pins into bushing and slot of Support Bracket. Pull top Spring Loaded Hinge Pins

and engage with cabinet frame and Top Cap.

• Ensure Catch Plate on Front Side Panel is facing center of cabinet. Pull and lock [3] Spring Loaded Hinge Pins of Front Side Panel

leaving the bottom rear hinge pin in the released position. Insert bottom rear hinge pin into bushing of Side Panel Support Bracket..

Release rear top Spring Loaded Hinge Pin and ensure that panel is engaged with cabinet frame. Close Panel and release front Hinge

Pins.

• to remove In-Row Side PanelsREVERSE STEPS

IMPORTANT: Remove Rear Split doors prior to Removal and Installation. Install Rear Side Panel First

Bumper Plate

Produkt Specifikationer

Mærke:	Panduit
Kategori:	Ikke kategoriseret
Model:	N82SPS

Har du brug for hjælp?

Hvis du har brug for hjælp til Panduit N82SPS stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Panduit Manualer

Panduit MEHT187 Manual

29 December 2024

Panduit DIRBB2007S21W Manual

29 December 2024

Panduit CDE3 Manual

29 December 2024

Panduit EC001 Manual

29 December 2024

Panduit PZICE Manual

15 December 2024

Panduit PZICEA Manual

15 December 2024

Panduit PZNDVK Manual

15 December 2024

Panduit DIRLC9606RB1 Manual

11 December 2024

Panduit EA001 Manual

9 December 2024

Panduit FPONE2 Manual

14 November 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 300004 Manual

16 Juni 2025

Playtive IAN 321241 Manual

16 Juni 2025

Cleveland 24CEA10 Manual

16 Juni 2025

Hughes & Kettner Redbox Pro Manual

16 Juni 2025

Playtive IAN 279576 Manual

16 Juni 2025

Playtive IAN 321903 Manual

16 Juni 2025

Wahoo RPM Cadence Manual

16 Juni 2025

Playtive IAN 359564 Manual

16 Juni 2025

Playtive IAN 272426 Manual

16 Juni 2025

Playtive IAN 321236 Manual

16 Juni 2025