Panduit NK5E88MBUY Manual

Panduit Ikke kategoriseret NK5E88MBUY

Læs gratis den danske manual til Panduit NK5E88MBUY (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Panduit NK5E88MBUY, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

N KET EY

NETWORK COMPONENTS

CONTRACTOR GRADE

For Technical Support: www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

Page 1 of 2

NetKey Keystone Style Jack Modules

Part Numbers: NK366M**Y, NK388M**Y, NK588M**Y, NK5E88M**Y, NK5E88M**Y-Q

Straighten conductors and arrange in proper color sequence.

Remove 3" (76.2mm) of cable jacket and untwist pairs.

Pull conductors until outer jacket is inside cap. Bend up 90°. Cut conductors on an angle and insert into cap.

Snap cap squarely on housing until it clicks.Trim conductors flush with cap using wire snipping tool (CWST).

NOTE: Cable jacket is inside the cover.

Use Snap Tool (7A) or standard Slip Lock Pliers (7B).

Apply pressure to cap until it clicks again. Cap must be flush on

housing.

Termination Cap Removal Instructions

--- FOR USE IN KEYSTONE STYLE OUTLETS AND PATCH PANELS ONLY ---

--- OVER FOR KEYSTONE STYLE PANEL OPENING REQUIREMENTS ---

Slide screwdriver under cap to separate from housing.Push forward and down against latch at end of guide ramp until cap releases.

** Denotes jack module color code.

E-mail:

techsupport@panduit.com

Phone:

866-405-6654

For Instructions in Local Languages

and Technical Support:

www.panduit.com/resources/install_maintain.asp

INSTALLATION INSTRUCTIONS

www.panduit.com

Page 2 of 2

--- KEYSTONE STYLE PANEL OPENING REQUIREMENTS ---

PANEL OPENING REQUIREMENTS

KEYSTONE SERIES

Panel Thickness: (.048"-.058")

.58"–.59" (14.86mm)

.76"–.77" (19.43mm)

--- CATEGORY 5/5E NK588/5E88 SERIES WIRING SEQUENCES ---

WIRING DIAGRAM

Part Numbers

NK588/NK5E88

Modular Plug

Contacts

Insulation

Displacement

Contacts

“Category 5/5E” Keystone Style Jack Modules Color-Coded Wire Positions

T568A, ISDN T568B, AT&T 258A, WECO

GREEN

WHITE/GREEN

WHITE/ORANGE

WHITE/BLUE

BLUE

ORANGE

BROWN

WHITE/BROWN

ORANGE

WHITE/ORANGE

WHITE/GREEN

WHITE/BLUE

BLUE

GREEN

BROWN

WHITE/BROWN

Refer to catalog for a listing of color-coded NetKey Keystone Style Jack Modules.

--- CATEGORY 3 NK366/388 SERIES WIRING SEQUENCES ---

WIRING DIAGRAM

Part Number Part Number

NK366 NK388

EIA/TIA 568B, AT&T

258A, WECO

USOC 4-wire

in 6 pin

USOC 6-Wire

(8 Pin Jack) USOC, RJ11/RJ25

1 WHT/ORG T2

2 ORG R2

3 WHT/GRN T3

4 BLU R1

5 WHT/BLU T1

6 GRN R3

7 WHT/BRN T4

8 BRN R4

2 WHT/ORG T2

3 BLU R1

4 WHT/BLU T1

5 ORG R2

1 NC

2 WHT/GRN T3

3 WHT/ORG T2

4 BLU R1

5 WHT/BLU T1

6 ORG R2

7 GRN R3

8 NC

1 WHT/GRN T3

2 WHT/ORG T2

3 BLU R1

4 WHT/BLU T1

5 ORG R2

6 GRN R3

“Category 3” Keystone Style Jack Modules Color-Coded Wire Positions

10 Base-T EIA/TIA 568A, ISDN

USOC 4-Wire

(8 Pin Jack) RJ45, USOC 8-Wire

1 WHT/GRN T3

2 GRN/WHT R3

3 WHT/BRN T4

4 NC

5 NC

6 BRN/WHT R4

7 NC

8 NC

1 WHT/GRN T3

2 GRN R3

3 WHT/ORG T2

4 BLU R1

5 WHT/BLU T1

6 ORG R2

7 WHT/BRN T4

8 BRN R4

1 NC

2 NC

3 WHT/ORG T2

4 BLU/WHT R1

5 WHT/BLU T1

6 ORG.WHT R2

7 NC

8 NC

1 BRN R4

2 WHT/GRN T3

3 WHT/ORG T2

4 BLU R1

5 WHT/BLU T1

6 ORG R2

7 GRN R3

8 WHT/BRN T4

Refer to catalog for a listing of color-coded NetKey

Keystone Style Jack Modules.

1 8

Pin #’s

Notes:

1. For specified performance, follow TIA/EIA 568A installation guidelines and use equivalent or higher category twisted pair cable.

2. Keystone Style Jack Modules can terminate PVC or Plenum rated 22-24 AWG solid or stranded IWC cable with 0.048 inch (1.2mm)

maximum insulated conductor outside diameter.

3. Keystone Style Jack Modules may be reterminated a minimum of 10 times.

4. For technical and performance data, refer to catalog or consult Panduit Technical Support.

As with all Wiring Accessories, the following statements apply:

1. Never install communications wiring during a lightning storm.

2. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations.

3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface.

4. Use caution when installing or modifying communication wiring.

Produkt Specifikationer

Mærke:	Panduit
Kategori:	Ikke kategoriseret
Model:	NK5E88MBUY

Har du brug for hjælp?

Hvis du har brug for hjælp til Panduit NK5E88MBUY stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Panduit Manualer

Panduit MEHT187 Manual

29 December 2024

Panduit DIRBB2007S21W Manual

29 December 2024

Panduit CDE3 Manual

29 December 2024

Panduit EC001 Manual

29 December 2024

Panduit PZICE Manual

15 December 2024

Panduit PZICEA Manual

15 December 2024

Panduit PZNDVK Manual

15 December 2024

Panduit DIRLC9606RB1 Manual

11 December 2024

Panduit EA001 Manual

9 December 2024

Panduit FPONE2 Manual

14 November 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive IAN 304923 Manual

16 Juni 2025

Playtive IAN 115593 Manual

16 Juni 2025

Playtive IAN 306075 Manual

16 Juni 2025

AmpliVox Airvox SW690 Manual

16 Juni 2025

Playtive HG06184 Manual

16 Juni 2025

Xblitz FX5 Exclusive Manual

16 Juni 2025

Playtive IAN 279595 Manual

16 Juni 2025

Playtive IAN 285626 Manual

16 Juni 2025

Playtive IAN 322785 Manual

16 Juni 2025

Hinkley Lighting Moore 46412HB Manual

16 Juni 2025