Panduit R4PFL Manual

Panduit Ikke kategoriseret R4PFL

Læs gratis den danske manual til Panduit R4PFL (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Panduit R4PFL, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

For Technical Support: www.panduit.com/resources/install_maintain.asp

Page 1 of 2

INSTALLATION INSTRUCTIONS

Finger Cable Managers for 4 Post Racks

Part Number(s): R4PFL,R4PFR

R4PFL R4PFR

(4) #12-24 X 12” Hex Head

Bonding Screws

(included with both R4PFL

and R4PFR)

Note: R4PFL and R4PFR are sold separately.

R4PFL Installation:

• The R4PFL may be installed anywhere on the outside of the left front post where a server or equipment will be installed.

• For maximum stability, install using front holes of rack post and finger manager and fasten using (4) #12-24 X 1/2” Hex Head Bond-

ing Screws. Be sure that finger flags are pointing upward. See Figure 1.

• If Vertical Patch Panel Brackets (CVPPB, sold separately) are used, then use the rear holes of rack post and finger manager and

fasten using (4) #12-24 X 1/2” Hex Head Bonding Screws. See Figure 2.

R4PFL

Finger flags

pointing upward

#12-24 X 1/2” Hex

Head Bonding Screws

Vertical Patch Panel Bracket

(CVPPB)

Front of rack

Figure 1 Figure 2

E-mail:

cs@panduit.com

Fax:

(708) 444-6448

For Instructions in Local Languages

and Technical Support:

www.panduit.com/resources/install_maintain.asp

Page 2 of 2

INSTALLATION INSTRUCTIONS

www.panduit.com

R4PFR Installation:

• The R4PFR may be installed anywhere on the outside of the right front post where a server or equipment will be installed.

• For maximum stability, install using front holes of rack post and finger manager and fasten using (4) #12-24 X 1/2” Hex Head Bond-

ing Screws. Be sure that finger flags are pointing upward. See Figure 3.

• If Vertical Patch Panel Brackets (CVPPB, sold separately) are used, then use the rear holes of rack post and finger manager and

fasten using (4) #12-24 X 1/2” Hex Head Bonding Screws. See Figure 4.

R4PFR

Finger flags

pointing upward

#12-24 X 1/2” Hex Head

Bonding Screws

Vertical Patch Panel Bracket

(CVPPB)

Front of rack Front of rack

Figure 3 Figure 4

FINGER REMOVAL

Score Grooves

Apply inward pressure

Score grooves are designed into fingers to accommodate easy and

clean finger removal.

To remove fingers, apply inward pressure to finger ends to snap off

fingers at hte score groove. See Figure 5.

Figure 5

Produkt Specifikationer

Mærke:	Panduit
Kategori:	Ikke kategoriseret
Model:	R4PFL

Har du brug for hjælp?

Hvis du har brug for hjælp til Panduit R4PFL stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Panduit Manualer

Panduit MEHT187 Manual

29 December 2024

Panduit DIRBB2007S21W Manual

29 December 2024

Panduit CDE3 Manual

29 December 2024

Panduit EC001 Manual

29 December 2024

Panduit PZICE Manual

15 December 2024

Panduit PZICEA Manual

15 December 2024

Panduit PZNDVK Manual

15 December 2024

Panduit DIRLC9606RB1 Manual

11 December 2024

Panduit EA001 Manual

9 December 2024

Panduit FPONE2 Manual

14 November 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Planet XGPN-100 Manual

15 Juni 2025

Proficook PC-EKA 1283 Manual

15 Juni 2025

OmniMount OBSP8 Manual

15 Juni 2025

Levenhuk FS10 Manual

15 Juni 2025

Vestil PM4-2148-LP Manual

15 Juni 2025

ElectriQ STRV-W1-B Manual

15 Juni 2025

Adler AD 4521 Manual

15 Juni 2025

AMX HydraPort HPX-AV102 Manual

15 Juni 2025

Hughes & Kettner Red Box Mk II Manual

15 Juni 2025

Hughes & Kettner Quantum QC 412 Manual

15 Juni 2025