Pearl Sports S-1030LS Manual


Læs gratis den danske manual til Pearl Sports S-1030LS (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Pearl Sports S-1030LS, eller vil du spørge andre brugere om produktet?

Side 1/4
Congratulations on your purchase!
To get optimum performance from your S-1030L / S -1030LS Concert Snare Stand,
please read this Instruction Manual before playing.
S-1030L/S-1030LS
PEARL CONCERT SNARE STAND
Instruction Manual
Rubber Tip
Gyro-Lock Tilter
Wing Nut
Wing Bolt
Wing Nut
Base
Section
Basket
Section
S-1030LSS-1030L
Telescoping Arms
Die-Cast Joint
24" (60cm)
Fig.4
Leg
Direction
Drum Tilting
Direction
Note
When handling tubular hardware do not put your fingers into
the tubes to prevent injury to your fingers.
Note
For optimal stability,
one leg should be
placed in the same
direction as the tilt
of the drum. (Fig.4)
Gyro-Lock Tilter
Wing Nut
Upper Tube
Fig.2
Fig.1
(Illust:S-1030L)
Fig.3
(Illust:S-1030L)
Gyro-Lock Tilter
Wing Nut
Die cast Joint
Upper Tube
Base Section Assembly
Loosen the Wing Bolt on the Base Section and extend the
legs to form a stable tripod (a minimum of 24" (60cm) is
recommended for optimum stability). Tighten the Wing
Bolt securely when set (Fig.1).
Basket Section Assembly
The Basket Section is packed with the Arms and the Upper
Tube folded. Loosen the Wing Nut on the Gyro-Lock Tilter
and turn the Upper Tube as shown (Fig.2).
Loosen the Wing Nut on the Die Cast Joint on the Base
Section and insert the Upper Tube of the Basket Section
as shown. Adjust the height to your preference and tighten
the Wing Nut on the Die-Cast Joint securely (Fig.3).


Produkt Specifikationer

Mærke: Pearl Sports
Kategori: Ikke kategoriseret
Model: S-1030LS

Har du brug for hjælp?

Hvis du har brug for hjælp til Pearl Sports S-1030LS stil et spørgsmål nedenfor, og andre brugere vil svare dig