Pinnacle DMP3 DualMicrophon PreAmp Manual

Pinnacle Modtager DMP3 DualMicrophon PreAmp

Læs gratis den danske manual til Pinnacle DMP3 DualMicrophon PreAmp (10 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 21 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 11 anmeldelser. Har du et spørgsmål om Pinnacle DMP3 DualMicrophon PreAmp, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

DMP3

User Guide

Dual mic preamp / direct box

DMP3 | User Guide

Introduction

Thank you for purchasing the M-Audio DMP3 Microphone/Instrument

Pre-Ampliﬁer. The DMP3 gives you two completely independent channels of high gain,

ultra low noise pre-amps in a sturdy desktop unit. Each channel provides low

impedance microphone inputs on XLR connectors with optional phantom power, plus

an alternate high impedance instrument input on 1/4" TS jacks. The DMP3 outputs can

be used as balanced or unbalanced via its 1/4” TRS jacks.

Microphones, guitars with magnetic or piezo pickups, and any instrument that needs a

boost in gain to "line level" will benefit from the superior sonic quality of the DMP3. Two

separate gain ranges are conveniently selectable from the front panel for each DMP3

channel. Low cut "rumble" filters for each channel eliminate unwanted low-end noise,

while individual phase inversion switches ensure that you will always achieve the greatest

result when using the DMP3 in a stereo or dual mic situation. Large, classic VU meters

give an excellent visual representation of the DMP3 output levels.

DMP3 Features

•2 independent XLR, fully balanced mic inputs.

•2 alternate, independent 1/4” unbalanced, high impedance inputs, impedance

matched for ideal performance with electric and acoustic guitars and other

high impedance mics or instruments.

•Each preamp channel provides two gain ranges to accomodate a variety of

output levels from microphones and instruments.

•Exceptional frequency response, extremely flat throughout all frequencies.

•Separate low-cut ﬁlters for each channel with switch and LED indicator.

•Separate gain controls for each of the pre-ampliﬁers.

•Individual phase inversion switches for each channel.

•VU meters for eac preamp channel gives excellent visual reference of outputh

levels.

•Individual clip LEDs for each pre-amp channel indicate peak levels.

•XLR 48v phantom power can be switched on or oﬀ for both mic inputs, with

an LED indicator.

•Dual-purpose independent 1/4” outputs accept either tip-ring-sleeve plugs for

balanced outputs or tip-sleeve plugs for unbalanced outs.

•Sturdy desktop unit with a handsome, vintage look.

Produkt Specifikationer

Mærke:	Pinnacle
Kategori:	Modtager
Model:	DMP3 DualMicrophon PreAmp
Vægt:	754 g
Produktfarve:	Sort
Equalizer:	Ingen
Strømforbrug (typisk):	9 W
Fjernbetjening inkluderet:	Ingen
Frekvensområde:	20 - 80000 Hz
Impedens:	3000 ohm (Ω)
Forbindelsesteknologi:	Ledningsført
Lyd-output kanaler:	2.0 kanaler
Effektkrav:	AC 100 - 240 V
RDS Tuner inkluderet:	Ingen
klirfaktor (THD):	0.00035 %
Signal/støjforhold:	120 dB
Linie ud:	Ja
Line-in:	Ja
I/O-porte:	2 x XLR\n4 x 1/4"
Maksimalt indgangsniveau:	1 V