Qazqa RLX-1201 Infrared Sensor Instruction Manual

Qazqa Lettelse RLX-1201 Infrared Sensor Instruction

Læs gratis den danske manual til Qazqa RLX-1201 Infrared Sensor Instruction (3 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 24 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 12.5 anmeldelser. Har du et spørgsmål om Qazqa RLX-1201 Infrared Sensor Instruction, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Correct moving orientation Detection Angle

9m Max 120°

It can identify day and night automatically. And the working light can be chosen freely and make it work at

night and not work in the day time.

Illuminated time can be adjusted according to the customer’s desire.

Mini shell (57mm*44.5mm*28mm)

Sense LED: when it detect sensing signal, the LED flash.

Power source: 220-240V/AC

Power frequency: 50Hz

Rated load: 50W Max.

Detection range: 9m Max.

Time setting: Min: <5sec

Max:8min±1min(adjustable)

Detection angle: 120°

Light-control: <10~2000LUX (adjustable)

Working humidity: <93%RH

Working temperature: -25~+45℃

Power consumption: <0.5W

Installation height: 0.7~2m

Black White

Summary

Characters

Specifications

Sensor information

RLX-1201

Infrared Sensor

Instruction

The product is a new saving-energy switch adopting the good sensitivity

detector, integrated circuit and SMT. It gathers automatic, convenient, safe,

saving-energy and practical functions. The wide detection field is made up of up

and down, left and right service field. It works by receiving human motion

infrared rays. When one enters the detection fields, it can start the load at once

and identify day and night automatically;It can be used with various types of

lamps and lanterns .

Unit:mm

IP:44

After installation, before switching on power turn the time anti-clockwise to min;

Switch on power, after 30sec the sensor enter stable working state;

After the load turn off, sense it, the load should turn on, and under the condition that no continual sensing

signal, the load should turn off within 5sec;

When the light-control knob anti-clockwise set to the min, if you test the unit in the daytime, sense it, the load

should not work. Cover the detection window with opaque object (simulate night light) and sense it, the load

should turn on;

If all are normal, according to your require you can turn the time knob to set the lighting time and turn the

light-control knob to select working light.

Note:please don’t adjust the two functional buttons to excess. That is because the two

functional buttons were connected to the components directly, there is a small stopper in

each of the two components, when you adjust the buttons from start to end, the excessive

turn will damage the stopper，and lead to the 360°non-stop turn around.The adjust range

limit is 270°, please do pay attention to this.

The factory intercalation:Light-control is max, Time setting is min.

Test

Connect the power and the load wire with

the sensor according to connection-wire

diagram;

~input

LBrown

Blue Red

output

Sensor

Load

Connection-wire diagram

Light-control

setting

Time setting



In front of the detection window there should be no hinder or unrest objects effecting detection.

Avoid installing it near air temperature alteration zones for example: air condition, central heating, etc.

Please don’t open the case for your safety if you find the hitch after installation.

Remark

1. Keep the sensor face to the area where human usually move.

2. Keep the sensor face to the position of the ambient light in order to get much more exact illuminance setting.

3. If detect the signal again within the time-delay, the time-delay will be over lied.



Notes

Electrician or experienced human can install it.

The unrest objects can’t be regarded the installation basis-face.

Produkt Specifikationer

Mærke:	Qazqa
Kategori:	Lettelse
Model:	RLX-1201 Infrared Sensor Instruction

Har du brug for hjælp?

Hvis du har brug for hjælp til Qazqa RLX-1201 Infrared Sensor Instruction stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lettelse Qazqa Manualer

30 December 2025

24 August 2024

24 August 2024

23 August 2024

Qazqa RLX-1201 Infrared Sensor Instruction Manual

23 August 2024

23 August 2024

23 August 2024

23 August 2024

23 August 2024

23 August 2024

Lettelse Manualer

Nyeste Lettelse Manualer

Dainolite V166-1W Manual

5 April 2025

Dainolite OFE-161P Manual

5 April 2025

Dainolite DMLED10-A-5D Manual

5 April 2025

Dainolite DM1958F Manual

5 April 2025

NUVO Ballerina 60/1265 Manual

4 April 2025

NUVO SF77/196 Manual

4 April 2025

NUVO Ballerina 60/329 Manual

4 April 2025

NUVO Cordello 60/7883 Manual

4 April 2025

NUVO Destin 60/7706 Manual

4 April 2025

NUVO Livingston 60/7669 Manual

4 April 2025