Qazqa 90501 Manual

Qazqa Lettelse 90501

Læs gratis den danske manual til Qazqa 90501 (4 sider) i kategorien Lettelse. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Qazqa 90501, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

VAP Duo WL Silver

MODEL: 90501

INTRODUCTION

The Light incorporates a PIR (Passive Infra Red) sensing device which

continuously scans a preset operating zone and immediately switches

the light on when it detects movement in that area. This means that

whenever movement is detected within the range of the sensor the

light will switch on automatically to illuminate pathways, steps,

patios, porches, or whatever area you have selected to light for rea-

sons of safety, convenience or security.

While there is movement within range of the unit the light will

remain on.

WHILE TO FIT YOUR LIGHT

To achieve best results, we suggest you account the following points:

■ Ideally the Light should be mounted 1.8 to 2.5 meters (6 to 8ft)

above the area to be scanned (refer Figure).

■ To avoid damage to unit-do not aim the sensor towards the sun.

■ To avoid nuisance triggering, the sensor should be directed away

from heat sources such as barbecues, Air-conditioners, other

outside lighting, moving cars and ﬂue vents.

■ To avoid nuisance triggering, keeping away from the area of strong

electromagnetic disturbance.

■ Do not aim towards reﬂective surfaces such as smooth white

walls, swimming pools, etc. The Security light scanning speciﬁcati-

ons (Max. 8 meters at 130°) may vary slightly depending on the

mounting height and location. The detection range of the unit

may also alter with temperature change. Before selecting a place

to install your light you should note that movement across the

scan area is more eﬀective than movement directly toward or

away from the sensor. (refer Figure). If movement is made walking

directly towards or away from the sensor and not across, the

apparent detection range will be substantially reduced. (refer

Figure )

FITTING THE UNIT

Installation by a licensed electrician and according to IEC wiring Regu-

lation.

Before commencing any electrical work, ensure mains supply cables

are isolated by switching oﬀ and removing the relevant fuse.

1. Unscrew the Terminal Box Cover Screw then remove the Terminal

Box Cover

2. Use the Terminal Box Cover to mark the position of screw holes

onto mounting surface. Drill the wall to depth of about 30 mm

and ﬁt the plastic plugs, and then ﬁx the Cover to the mounting

surface with rightly screws. Be careful to avoid drilling or screwing

into concealed electrical wiring.

3. Connecting the Power Cable (H05RN-F 3G 1mm², not included) to

the Terminal Block, see the relative symbol. Ensure the cable must

pass through the Cable Gasket.

4. Fit the lamp body to the Terminal Box Cover. Adjusting the light

direction you desired, then tighten the screws.

5. Switch the main power on.

Important: loosen the lock nuts and screws and outdoor wall light

before making any adjustments.

4x30mm

90°

45° 45°

90°

142 mm

6x27mm

45° 45°

OFF

130° 130°

φ6mm

30mm

39.5mm

130°

H:2.5m

1min

5sec

0 2

6 8mm

Produkt Specifikationer

Mærke:	Qazqa
Kategori:	Lettelse
Model:	90501

Har du brug for hjælp?

Hvis du har brug for hjælp til Qazqa 90501 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lettelse Qazqa Manualer

30 December 2025

24 August 2024

24 August 2024

23 August 2024

Qazqa RLX-1201 Infrared Sensor Instruction Manual

23 August 2024

23 August 2024

23 August 2024

23 August 2024

23 August 2024

23 August 2024

Lettelse Manualer

Nyeste Lettelse Manualer

Dainolite V166-1W Manual

5 April 2025

Dainolite OFE-161P Manual

5 April 2025

Dainolite DMLED10-A-5D Manual

5 April 2025

Dainolite DM1958F Manual

5 April 2025

NUVO Ballerina 60/1265 Manual

4 April 2025

NUVO SF77/196 Manual

4 April 2025

NUVO Ballerina 60/329 Manual

4 April 2025

NUVO Cordello 60/7883 Manual

4 April 2025

NUVO Destin 60/7706 Manual

4 April 2025

NUVO Livingston 60/7669 Manual

4 April 2025