Quoizel Darius DRS1911EK Manual

Quoizel Lys Darius DRS1911EK

Læs gratis den danske manual til Quoizel Darius DRS1911EK (3 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Quoizel Darius DRS1911EK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

1of3

For Style DRS1911EK

Warnings and Cautions

Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.

These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly

recommend that a licensed, professional electrician perform the installation.

Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.

Please go to for product cleaning tips. Go to the selection.

(1)A21 Medium Base Bulb 150W Maximum, Medium Base Vintage Bulb is recommended, bulb not included.

Minimum Hanging Height is 23”, Maximum Hanging Height is 120”.

30-45 minutes

Identify and inspect all parts before beginning installation. Check package content list and diagrams below to ensure all parts are

present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact your original place of purchase.

www.quoizel.com Care + Maintenance

Light Source:

Fixture Hanging Height:

EstimatedAssembly Time:

Preparation:

Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.

Installation Guide #IS-DRS1911EK

2019 QuoizelInc.

ReleasedDate:2019-03-15

visit us on-line at www.quoizel.com

Hardware Contents

Crossbar

Assembly

x 1

Ceiling

Canopy

x 1

Fixture Chain

x 1

Quick Link

x 2

Package Contents

Fixture Body

x 1

Tab

x 4

Glass Panel

x 4

Fixture Loop

x 1

STEP 1 Remove Arm and Cage-

A. Unlock lock balls in the bottom edge

of the cage and remove the arm from

the Fixture Body (D).

B. Unscrew screws on the top edge of

the cage and remove the cage from

the Fixture Body (D).

Figure 2

STEP 2 Install Bulb-

A. Insert the bulb onto the socket

and screw snugly into place.

Socket

Vintage Bulb

(recommended

but not included)

Figure 1

Arm

Screw

Cage

Lock Ball

STEP 3 Install Glass Panels-

A. Place the Glass Panel (C) into the slot in the bottom edge of the

cage. Secure the Glass Panel (C) by pressing the Tab (B) onto the

top edge of the Glass Panel (C) and the slot on the top edge of the

cage.

Slot

Figure 3

Cage

2of3

2019 QuoizelInc.

ReleasedDate:2019-03-15

visit us on-line at www.quoizel.com

Green Ground Screw

on the Crossbar

White wire

from outlet box

Supply wire from fixture

identified with the Label “N”

Black wire from

outlet box (or Red)

Supply wire from fixture

identified with the label “L”

Bare, or Green

Ground wire

from outlet box

Ground wire

from Fixture

STEP 7 - Making the Wire Connections

A. Wrap bare or green ground wire around green ground screw on the

crossbar, no less than 2 inches from the end of the wire. Tighten the

green ground screw.

B. Use standard wire connectors (not included) to make all wire

connections. Twist connectors until wires are tightly joined together.

Wrap each connection with approved electrical tape and carefully

stuff all the connected wires into outlet box.

Note: If the electrical wire is going to be cut shorter than provided

you will need to identify the "L" line wire and the "N" neutral wire

before you cut the excess wire off. One is labeled N and the other

labeled L. To do this separate the "L" line wire and the "N" neutral

wire as far as you need to. Re-label the wire near where you want to

make the cut. Be sure to mark the wire on the side of the fixture and

not on the excess wire being cut and removed.

Figure 7

STEP 4 Install Fixture Body and

Arm to Cage

Place the cage over the bulb, attach

to the fixture hood on the Fixture

Body ( ) and secure with previously

removed screws. Hand tighten until

snug with screwdrivers.

B. Place bolts on the bottom end of the

arm to holes on the bottom edge of

the cage and secure with previously

removed lock balls. Hand tighten

until snug.

C. Pass the nipple on the Fixture Loop

(A) through the hole on the top of the

arm and thread it onto the top center

of the Fixture Body (D). Hand tighten

until snug.

Figure 4

Bolt

Hole

Arm

Screw

Cage

Lock Ball

STEP 5 -Install the Crossbar Assembly to Outlet Box and Adjust

the length of the Nipple

A. Attach the Crossbar Assembly (AA) to the Outlet Box with the head

of the Green Ground Screw facing you. Secure it with Outlet Box

Screws (not included), tighten until snug

B. Adjust the hex nut and lock washer underside of the crossbar to the

middle of the nipple.

C. Remove the canopy lock ring from the canopy chain loop. Place the

Ceiling Canopy (DD) over the canopy chain loop against the ceiling

to determine the correct position of the nipple. Thread the canopy

lock ring onto the canopy chain loop. Adjust the nipple to allow the

Ceiling Canopy (DD) to rest against the ceiling when held in place

by the canopy lock ring.

D. Remove the canopy lock ring and the Ceiling Canopy (DD). Tighten

the lock washer and the hex nut against the crossbar to secure in

place.

Outlet Box Screw

(not included)

Hex Nut and

Lock Washer

Outlet Box

Green Ground Screw

Canopy Chain Loop

Canopy Lock Ring

Nipple

Figure 5

STEP 6 - Install the Fixture Chain and Ceiling Canopy

A. Adjust the Fixture Chain (BB) to your desired length by removing

links if needed. Put a cloth over the Fixture Chain (BB) to protect the

finish.

B. Pull the supply wires through the Fixture Chain (BB) alternating

links. After the wires are through the Fixture Chain (BB), pull the

Supply Wires and the Ground Wire through the canopy lock ring and

the Ceiling Canopy (DD) in order.

C. Attach one end of the Fixture Chain (BB) to the fixture loop with one

Quick Link (CC). Lift the fixture and Fixture Chain (BB) up and attach

the other end of the Fixture Chain (BB) onto the canopy chain loop

with another Quick Link (CC). The fixture will now hang safely.

Nipple

Fixture

Loop

Supply

Wires and

Ground Wire

Canopy

Chain Loop

Canopy

Lock Ring

Figure 6

(Step 6 Continued)

D. Feed the Supply Wires

and Ground Wire through

the canopy chain loop

and nipple into the outlet

box. Cut the wires

leaving approximately 8”

of wire extending from

the Outlet Box.

E. Go to Step 7 for wire

connections and follow

the directions. Return to

Step F in this step when

complete with Step 7.

F. Raise the Ceiling Canopy

(DD) and canopy lock

ring up the Fixture Chain

(BB) and over the canopy

chain loop. Tighten the

canopy lock ring onto the

canopy chain loop until

tight.

Suggested chain length

for Ceiling height :

8’ ceiling : use 11 link of

chain and 2 quick links

9’ ceiling : use 21 links of

chain and 2 quick links

10’ ceiling : use 31 links

of chain and 2 quick links

HOW TO REPLACE GLASS PANEL

A. Remove the fixture loop from the fixture body.

B. Refer to Step 1 to remove the arm and the cage from the fixture body.

B. Refer to Step 3 to replace the glass panel.

C. Refer to Step 4 to reinstall the cage, the arm and the fixture loop to

the fixture body.

Produkt Specifikationer

Mærke:	Quoizel
Kategori:	Lys
Model:	Darius DRS1911EK

Har du brug for hjælp?

Hvis du har brug for hjælp til Quoizel Darius DRS1911EK stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lys Quoizel Manualer

Quoizel Darius DRS1911EK Manual

6 Juli 2025

Quoizel Winnett WINN8524MBK Manual

2 Oktober 2024

Quoizel Trafalgar TRF8624MBK Manual

1 Oktober 2024

Quoizel Dury RDY1712AWH Manual

26 August 2024

Quoizel Quinn TF5215TVB Manual

23 August 2024

Quoizel PCSO8525C Manual

23 August 2024

Quoizel Blade PCBD8526EK Manual

23 August 2024

Quoizel Twinkle PCTK1616C Manual

23 August 2024

Quoizel PCSO8532C Manual

23 August 2024

Quoizel Giselle PCGI8528AB Manual

23 August 2024

Lys Manualer

Nyeste Lys Manualer

Ikan RB5-3PT-KIT Manual

6 Juli 2025

Schwaiger 660135 Manual

6 Juli 2025

American DJ WiFi Net 2 Manual

6 Juli 2025

Schwaiger 660173 Manual

6 Juli 2025

Schneider OVA48305 Manual

6 Juli 2025

Aquael Leddy Slim Sunny Manual

6 Juli 2025

Fotodiox P60 Manual

6 Juli 2025

NUVO Glamour 60/998 Manual

6 Juli 2025

Maxim Shoreline 10104 Manual

6 Juli 2025

Schneider Exiway Smartled OVA48314 Manual

6 Juli 2025