Rane FSC 22 Manual

Rane Blander FSC 22

Læs gratis den danske manual til Rane FSC 22 (4 sider) i kategorien Blander. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Rane FSC 22, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

OPERATING / SERVICE MANUAL FSC 22

STEREO COMPRESSOR

QUICK START

These virgin pages tremble at your touch. You’re eyes, the first. Their desperate inquisitive

scanning overwhelms. The summer air burns with anticipation. Do what you must, but what-

ever you do, don’t stop...PLEASE DON’T STOP...reading that is, at least this section before

you torch it.

Here’s some quick highlights:

Set the rear INPUT TRIM switch for the appropriate gain for your signal levels. Don’t be

thrown by the combo Input connectors; they take either ¼" TRS or 3-pin (XLR-type) plugs.

Both Output connectors may be used at the same time if needed, e.g., splitting to different

zones, etc.

Be sure the SYSTEM MODE switch is in its out (DUAL) position, as are the BYPASS

switches. Initially press the METER MODE switch in. Now the meter reads Output Level in

dBu—very useful during set-up. Remember to switch it out when through, so it returns to its

main role of displaying Gain Reduction.

Set the LEVEL controls to “7” for unity gain—a good place to start. Use the BYPASS

controls to A-B levels.

When used with true stereo program, press the SYSTEM MODE switch in to the SLAVE

position. This causes both Channels to operate equally if either exceeds its THRESHOLD

setting.

NEVER CONNECT ANYTHING EXCEPT AN RS 1 OR OTHER APPROVED RANE AC

POWER SUPPLY TO THE RED CONNECTOR THAT LOOKS LIKE A TELEPHONE JACK ON

THE REAR OF THE UNIT. This is an AC input and requires special attention if you do not

have an operational power supply EXACTLY like the one originally supplied with your unit. A

Rane Model FRS 8 or RAP 10 power supply is acceptable as well.

SYSTEM CONNECTION

Locating the FSC 22 in your system depends on the

application. When assembling a sound reinforcement system,

place the FSC 22 between the equalizer (if used) and the

active crossover, or the power amplifier if using passive

crossovers.

In recording applications, locate the FSC 22 in the insert

loops on the mixing console, or in series with the outputs

before the recorder. Most consoles allow headphone monitor-

ing of the processed signal (i.e., post inserts). A most useful

feature.

When using the FSC 22 on mixdown, connect it to the

output of the multichannel recorder, or in the inserts of the

mixdown console.

Many recording situations require connecting the FSC 22

to the patch bay in the system. This makes it easy to move

from one signal path to another, as new applications dictate.

Use only fully balanced wiring of this and all components,

without signal ground ever connecting between units. All

shields should be chassis, i.e., earth grounded. Consult Rane

Note 110, an application guide available from Rane Corpora-

tion or your local Rane dealer. This note details standard

wiring conventions which help reduce noise and distortion.

Produkt Specifikationer

Mærke:	Rane
Kategori:	Blander
Model:	FSC 22

Har du brug for hjælp?

Hvis du har brug for hjælp til Rane FSC 22 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Blander Rane Manualer

24 Juni 2025

22 Juni 2025

22 Juni 2025

21 Juni 2025

21 Juni 2025

21 Juni 2025

21 Juni 2025

21 Juni 2025

21 Juni 2025

21 Juni 2025

Blander Manualer

Nyeste Blander Manualer

Audac M2 Manual

16 Oktober 2025

Proel ATMP480Z6XL Manual

14 Oktober 2025

TOA M-124FX-EB Manual

10 Oktober 2025

Audiophony MYA8C Manual

6 Oktober 2025

Audiophony Digital-3 Manual

6 Oktober 2025

Audiophony MYA5D Manual

5 Oktober 2025

Proel MQ16USB Manual

4 Oktober 2025

Rolls Mini-Mix VI MX28 Manual

3 Oktober 2025

Rolls RM65B Manual

3 Oktober 2025

Rolls PM60 Manual

3 Oktober 2025