Rane MP 22x Manual

Rane Blander MP 22x

Læs gratis den danske manual til Rane MP 22x (6 sider) i kategorien Blander. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Rane MP 22x, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

Manual-1

OPERATORS MANUAL MP 22x

DJ MIXER

QUICK START

If you won’t read the manual (we know how it is) here are a few basic “plug it in and get signal thru it” facts. The

MP 22x has all unbalanced RCA connectors, except for the XLR & ¼" Mic Inputs, ¼" Mic Loop, and the balanced ¼" TRS

Master Outputs. Be sure your amplifier is off while making connections. On the front panel, set all controls to the middle of

their travel. Set all pushbuttons to their out position, slide the MASTER LEVEL all the way down. Turn the INPUT

SELECT switch for Channel A or B to an Input with material playing. Turn your amplifier on. Now slowly turn up the

MASTER LEVEL and see the material on the meters and hear it from the MASTER OUTPUT jacks.

There are two places where you can get lost. If you bring a phono signal into PH/LN 1 or 2 be sure to keep the LINE/

PHONO switch set to PHONO; likewise when using a CD player be sure this switch is set to LINE. If you plug into the

MASTER LOOP RETURN the signal path thru the unit is broken, since these are switching jacks. They are looking for

the return from an outside device that got its signal from the MASTER LOOP SEND, so only use these when you can

make a complete loop. Now that was a pretty quick start, right?

Never connect anything except a Rane RS 1 to the thing that looks like a red telephone jack on the rear of the

MP 22x. This is an AC supply and requires some special attention if you do not have an operational power supply exactly

like the one that came with your unit. Consult the Rane factory for a replacement or substitution.

Manual-2

FRONT PANEL DESCRIPTION

1. Front panel MAIN MIC input: Use this 3-pin connector for connecting a balanced microphone of any impedance.

2. MIC EQ controls: These two controls adjust the frequency contour of both Microphone Inputs. They have no effect on any

other Inputs. Positioning these controls to the “12 o'clock” position turns the Mic Equalization off.

3. CHANNEL A & B EQ ENGAGE switches: Engaging this switch enables the Channel Equalizer to function. In the out

position, the Equalizer is bypassed.

4. CHANNEL A & B EQ level controls: These four rotary controls, when enabled with the EQ ENGAGE switch, are used to

contour the frequency response of the selected Input Channel. This is not designed to be the only Equalizer in the system,

this is intended to provide EQ between varying program materials. We recommend an external graphic equalizer for best

overall system sound, connected between the MASTER OUTPUTS and the amplifier.

5. CUE A or CUE B switch: Engaging any single or combination of CUE pushbuttons sends any program present at the

respective Channel's INPUT SELECT selector to the Headphone and meter cue sections. The yellow LEDs adjacent to each

CUE select button illuminate when the switch is engaged. Not recommended for beat sync lights. See Operating Instruc-

tions on page Manual-6.

6. INPUT SELECT A & B: These four position rotary switches provide Input selection between the various phono/line inputs

for their respective mixing Channels.

7. AUX LEVEL control: This rotary control adjusts the LEVEL from the AUX LINE IN jacks.

8. ZONE LEVEL controls: Control the output LEVEL of ZONE 1 and ZONE 2.

9. PEAK dBu CUE/PROGRAM meter: This meter can switch between two display modes. Refer to the CUE/PROGRAM

switch description below.

10. Meter CUE/PROGRAM switch: In the out position, the meter indicates Master Program output level in PEAK dBu in

LEFT and RIGHT stereo. In the in position, mono CUE level is displayed on the LEFT side and mono Program level is

displayed on the RIGHT side.

11. MAIN MIC ENGAGE switch: This pushbutton ENGAGES the MAIN MIC Input. The adjacent red LED flashes when-

ever the switch is pressed in, signalling that the Main Mic is on.

Produkt Specifikationer

Mærke:	Rane
Kategori:	Blander
Model:	MP 22x

Har du brug for hjælp?

Hvis du har brug for hjælp til Rane MP 22x stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Blander Rane Manualer

21 Juni 2025

21 Juni 2025

21 Juni 2025

21 Juni 2025

21 Juni 2025

21 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

Blander Manualer

Nyeste Blander Manualer

Glemm MMX 54ZM Manual

21 Juni 2025

Roland M-5000 Manual

20 Juni 2025

DNA HLC 10 MK2 Manual

17 Juni 2025

16 Juni 2025

16 Juni 2025

16 Juni 2025

15 Juni 2025

13 Juni 2025

13 Juni 2025

NutriBullet Ultra Plus+ Manual

12 Juni 2025