Rane ME 15 Manual

Rane Blander ME 15

Læs gratis den danske manual til Rane ME 15 (6 sider) i kategorien Blander. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Rane ME 15, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

ME 15 and ME 30

OPERATING

AND

SERVICE MANUAL

II. PANEL DESCRIPTIONS

FRONT PANEL DESCRIPTION

1. POWER SWlTCH: As you have astutely surmised by now, this switch powers up the ME 15 or

ME 30. Note: “power” in this context refers to electrical power, as opposed to political,

financial (often related to the previous), psychic or supernatural.

2. FILTER LEVELSLIDE CONTROLS: Each of these sliders controls the output level of each of

the 30 bandpass filters. Center position is grounded for guaranteed flat response.

3. FILTER RANGE SWITCH: The gain range of the filter sliders is switchable (as a group) from

±6 dB for high resolution, to ±12 dB for maximum boost/cut capability.

4. BYPASS SWITCH: When the red LED is lit, this indicates that the unit or channel is in the

bypass mode: signal is routed directly from the input to the output without passing through

any active circuitry (often referred to as “hard-wire bypass”). Use this switch to compare

equalized and un-equalized material, or to bypass the EQ section in the event of power loss or

unit failure.

5. OVERLOAD INDICATOR: This red LED lights up if any section of the ME 15/30 is within 4 dB

of clipping. Occasional blinking of this LED is acceptable, but if it remains on more than

intermittently you should turn down either the equalizer’s level control(s) or reduce the

output level of the preceding component to avoid audible distortion.

6. LEVEL CONTROL: This controls the level of signal coming into the ME 15 /ME 30. Turn this

control down if the Overload LED lights up steadily (meaning too strong an input signal). Since

actual unity gain depends on varying slider settings (which is why we have not marked a unity

gain position on the front panel), use the bypass switch to determine the exact unity gain

position of this level control by comparing EQ and bypass volumes.

Produkt Specifikationer

Mærke:	Rane
Kategori:	Blander
Model:	ME 15

Har du brug for hjælp?

Hvis du har brug for hjælp til Rane ME 15 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Blander Rane Manualer

24 Juni 2025

22 Juni 2025

22 Juni 2025

21 Juni 2025

21 Juni 2025

21 Juni 2025

21 Juni 2025

21 Juni 2025

21 Juni 2025

21 Juni 2025

Blander Manualer

Nyeste Blander Manualer

Ibiza Sound MX401 Manual

14 September 2025

Mackie 1642VLZ4 Manual

14 September 2025

Mackie ProFX10v3+ Manual

14 September 2025

Mackie Master Fader Control App Manual

14 September 2025

Mackie DL32S Manual

14 September 2025

Mackie 1402VLZ4 Manual

14 September 2025

Mackie Onyx 12 Manual

14 September 2025

Mackie ProFX12v3 Manual

14 September 2025

Mackie 1604VLZ4 Manual

14 September 2025

Mackie Pro FX30 v3 Manual

14 September 2025