Rane MP 24 Manual

Rane Blander MP 24

Læs gratis den danske manual til Rane MP 24 (8 sider) i kategorien Blander. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Rane MP 24, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Manual-1

MP 24

DJ MIXER

OPERATORS MANUAL

QUICK START

Don't! Quick-starting an MP 24 is like trying to quick-start a 747. It's just not something you do. Trust us, you don’t

want to make mistakes with this sucker. So just this once—please—we highly recommend you read this entire manual:

front-to-back, every single page, every single word. It will familiarize you with the many intricacies of the MP 24, not to

mention all the nooks and crannies.

Manual-2

FRONT PANEL DESCRIPTION

1. POWER “ON” indicator: This yellow LED illuminates anytime the MP 24 is connected to an appropriate power source

(see #28, Rear Panel).

2. SOURCE CONTROL selectors: These four position rotary switches provide Input selection between the various Phono

and Line Inputs for their respective mixing Channels.

3. Input channel faders: These faders control the relative Levels of each of the four Input mixing Channels.

4. Channel CUE selectors: Engaging any single or combination of CUE pushbuttons sends any program present at the

respective Channel’s SOURCE CONTROL selector to the Headphone Cue section. The yellow LEDs adjacent to each CUE

select button illuminate when the switch is engaged.

5. CROSSFADE ENGAGE switch: Engaging this switch activates the CROSSFADER and disables manual mixing capabili-

ties. The adjacent green LED illuminates whenever the Crossfader is active.

6. Left-hand CROSSFADE ASSIGN switch: This four position rotary switch ASSIGNS the left side of the Crossfader to any

of the four Input Channels when the Crossfader is activated by its ENGAGE switch.

7. Right-hand CROSSFADE ASSIGN switch: This four position rotary switch ASSIGNS the right side of the Crossfader to

any of the four Input Channels when the Crossfader is activated by the ENGAGE switch.

8. CROSSFADER: This fader controls the Levels of any two Channels assigned to it by the left and right Crossfade ASSIGN

switches when the ENGAGE switch is activated. The entire Crossfader assembly is replaceable from the front panel

without disassembling the entire unit. See SERVICE INFORMATION on page Schematic-1for instructions.

9. ENGAGE MIC switch: This pushbutton enables the Microphone Inputs to feed the Booth, Zone, and Main Outputs. The

adjacent red LED flashes whenever the ENGAGE MIC switch is down and locked. This switch also activates a “ducker”

circuit in the Booth Output.(See #15 Front Panel and #20 Rear Panel.)

10. MAIN MIC LEVEL control: This rotary control sets the Level of the balanced low impedance MAIN MIC Input.

11. AUX MIC LEVEL control: This rotary control sets the Level of the unbalanced high impedance AUX MIC Input, most

often used for wireless mics.

Produkt Specifikationer

Mærke:	Rane
Kategori:	Blander
Model:	MP 24

Har du brug for hjælp?

Hvis du har brug for hjælp til Rane MP 24 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Blander Rane Manualer

Rane DA 216 Manual

20 Juni 2025

Rane RA 27 Manual

20 Juni 2025

Rane GE 30 Manual

20 Juni 2025

Rane Empath Mixer Manual

20 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

20 Juni 2025

Blander Manualer

Nyeste Blander Manualer

DNA HLC 10 MK2 Manual

17 Juni 2025

16 Juni 2025

16 Juni 2025

16 Juni 2025

15 Juni 2025

13 Juni 2025

13 Juni 2025

NutriBullet Ultra Plus+ Manual

12 Juni 2025

DNA CM8-DSP Manual

9 Juni 2025

DNA HLC 14 MK2 Manual

9 Juni 2025