Sekonda Active Pro 30238 Manual

Sekonda Smartwatch Active Pro 30238

Læs gratis den danske manual til Sekonda Active Pro 30238 (34 sider) i kategorien Smartwatch. Denne vejledning er vurderet som hjælpsom af 8 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 4.5 anmeldelser. Har du et spørgsmål om Sekonda Active Pro 30238, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/34
(ENGLISH)
SEKONDA ACTIVE PRO SMART
WATCH INSTRUCTIONS
(30238, 30239) WEARING YOUR SMART
WATCH
For the best data accuracy, please follow these
guidelines while wearing your watch. - Posion your
watch approximately two nger-widths from your
hand.
- For a comfortable t, adjust the strap or bracelet to
allow a nger width between it and your wrist.
POWERING ON YOUR SMART WATCH
- Remove the printed screen protector.
Below this is an addional screen protector. It is
advised that you keep this on your watch to protect it
from wear and tear. - Press and hold the digital crown
for 5 seconds to turn your smart watch on.
-If the watch doesn’t power on, connect the magnec charging cable to the back of
the watch, and leave it to charge for at least 10 minutes before trying again.
When charging, use a standard USB power source with
an output of 5V=1A or above. Before charging, make
sure the charging contacts are clean and free of
moisture.
- The home screen of the watch will be displayed. From
here, press the Digital Crown to access the funcons
list.
- Press the lower buon to return to the previous
screen.
- The screen will turn o when your smart watch is not
in use. To wake up the screen press the Digital Crown.
With “Wake on Wrist Raise” turned on, the screen will
also wake up when you turn your wrist. This will be
turned on by default.
THE SEKONDA PRO APP
Download and install
- To download the app please scan the QR code using your smartphone camera, or
search for “Sekonda Pro” in the app store on your smartphone.
The Sekonda Pro app is compable with smartphones running Android version 9.0
and above, or Apple iOS version 12.0 and above.
CONNECT YOUR SMART WATCH TO THE APP
- Open the app to read and accept the Terms of service, and accept the permissions.
- “A New Watch to Set Up” pop-up will appear on the app if it detects your watch
nearby. Tap the “Set Up” buon.
- The App will ask for a 4-digit pin that will appear on your watch. Enter this on your
phone to connect to the app.
- Alternavely tap on “Set Up a Watch” at the top of the home page of the app.- The
app will search for nearby devices. Your watch has a unique Bluetooth name
beginning with “Sekonda” followed by leers and/or numbers. You can nd your
watch’s Bluetooth name on the Welcome screen of your watch aer you have
selected the language, or by pressing the buon to enter menu list and navigang to
Sengs, and tapping on General > About.
- Tap your watch name from the list displayed on the Sekonda Smart app to connect
your watch.
- The watch will display the correct me aer pairing is successful.
SYNCHRONISE DATA WITH THE APP
- Aer your watch is paired with the app you can synchronise data the watch has
recorded.
- Please sync your app daily to avoid loss of recorded data. Data on the watch is reset
at midnight every day.
- To sync your data, connect to the app. On the home screen of the app, swipe down
to sync data with the watch. “Data syncing” will be displayed at the top of the page.
For the app to funcon correctly please take noce of the following:
- Do not pair the watch directly with the Bluetooth in your phone’s sengs.
Always pair the watch through the app.
- Do not turn o Bluetooth in your phone’s sengs.
- If you would like to receive nocaons from the app, you must accept the app’s
permissions.
SET UP
On the SEKONDA PRO app
- Immediately aer connecng your watch the app will prompt you to set
up your prole by entering your personal informaon such as height and weight. -
You will have the opon to enable frequently used features such as nocaons
and Bluetooth calling, set your steps and calorie goals, and set your preferences.
Set which nocaons you would like to receive on your watch - Tap
on the device icon on the app home page.
- Go to “Nocaons”
- Here you can set which nocaons you would like to be displayed on
your smart watch.
Other sengs
Tap the watch icon in the app.
- Focus – set up Do Not Disturb or Sleep mode for a set period of me.
With these modes enabled, you will no longer receive nocaon alerts, but
nocaons will sll appear in the watch’s Nocaon Centre. - Reminders – set up
Stand (sedentary) or Hydraon reminders.
- Display & Brightness – Choose sengs for the Always-on Display, Night
Shi mode, and turn on/o “Wake on Wrist Raise”. Please also note that having the
screen me set to longer will consume the baery life more quickly.
- Bluetooth Calling – Turn on/o permissions and set up favourite contacts.
- Health Data Measurements – Turn on/o monitoring Heart Rate, Blood
Oxygen, and Stress
- SOS – Set up your emergency contact
- Alarms – Set up to 20 alarms
- Menstrual Period – Enable/Disable period tracking and predicons
On your smart watch
Swipe up from the home screen. Several quick sengs can be accessed from this
screen by tapping the icons listed in the following order:
- Tap the minus icon to access the Do Not Disturb and Sleep mode sengs.
- Tap the watch icon to turn the Always-on display clock on/o.
- Tap the sun icon to set the screen brightness.
- Tap the fourth icon to turn on/o “Wake on Wrist Raise”.
- Tap the torch/ashlight icon to turn on torch mode.
- Tap the speaker icon to turn Sound Alerts on/o.
- Tap the water droplet to acvate the water lock.
- Tap the phone icon to use the Find Your Phone funcon.
CONNECTING MULTIPLE WATCHES TO ONE PHONE You can
create separate proles for dierent people and switch between these
when using the app. - Tap on the device icon on the app home page,
then tap on the + icon.
- The app will search for nearby watches. Follow the instrucons for
connecng a smart watch to the app to connect an addional watch.
- Aer connecng and seng up your prole you will be able to switch
between proles by tapping on the watch icon on the home screen
of the app, then tapping on the icon.
USING YOUR SMART WATCH
The smart watch interface
From the home screen (the screen displaying the clock): - Press the Digital Crown to
enter the main funcon list. You can turn the Digital Crown or swipe to scroll
through the funcons. - Swipe down to view the Nocaon Centre. Any
nocaons you have setup to be linked to your phone will appear here.
- Swipe up to view the quick sengs.
- Swipe right to view recently used apps. Scroll down to view your health data, and
music control.
- Swipe le to display Acvity (steps and calories burned). Connue swiping le to
show Heart Rate, Workout, Health (Heart rate, blood oxygen and stress level), Sleep
data, and Weather.
- From any screen, press the Digital Crown to return to the home screen. - Press the
lower buon to return to the previous screen.
- To turn your smart watch o, hold the digital crown down for 5 seconds. Select
Restart or Shut Down.
CHANGING YOUR WATCH DIAL STYLE
- On the home screen (the screen displaying the clock) of your watch, press and hold
on the middle of the screen.
- Swipe le or right to choose a dial style and tap to select it.
Downloading more dial styles
- Open the app and tap on the device icon on the app home page.
- Tap “Face Gallery”. Here you can browse dierent dial designs.
- To select a dial and add it to your watch, tap it and then tap “Add”.- Make sure your
watch is close to your phone. The app will display the download percentage for a few
seconds while data is transferred. - The new dial will then be displayed on your
watch.
Adding a photo to your watch dial
- Open the app and tap on the device icon on the app home page.
- Tap “Face Gallery”.
- Select “Photo Watch Face” to create your own dial.
- To enable this feature, you will be prompted to allow Sekonda Pro to access your
mobile phones photo album.
- Once you have accepted the permissions, select “Photo Watch Face” and then select
‘Add Photos’ to choose the image for your dial. - Select the colour/posion of the
me and date. Then tap add to proceed. - The app will display a download
percentage for a few seconds before the new dial appears.
- Up to 3 photo watch faces can be added at the same me.
FUNCTIONS
- From the home screen (the screen displaying the clock) press the Digital Crown to
enter the main funcon list.

Produkt Specifikationer

Mærke: Sekonda
Kategori: Smartwatch
Model: Active Pro 30238

Har du brug for hjælp?

Hvis du har brug for hjælp til Sekonda Active Pro 30238 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Smartwatch Sekonda Manualer

Sekonda

Sekonda Active 1909 Manual

15 August 2025
Sekonda

Sekonda Motion Pro 30240 Manual

13 August 2025
Sekonda

Sekonda Motion Plus 30221 Manual

13 August 2025
Sekonda

Sekonda Alpine GPS 30180 Manual

13 August 2025
Sekonda

Sekonda Flex 40453 Manual

12 August 2025
Sekonda

Sekonda Track 30169 Manual

12 August 2025
Sekonda

Sekonda Hybrid 30150 Manual

12 August 2025
Sekonda

Sekonda Flex Plus 40667 Manual

15 Juni 2025
Sekonda

Sekonda Active Pro 30238 Manual

15 Juni 2025

Smartwatch Manualer

Nyeste Smartwatch Manualer

Huawei

Huawei Watch GT 6 Pro Manual

14 November 2025
Casio

Casio Edifice ECB-800 Manual

13 November 2025
Huawei

Huawei Watch GT 6 Manual

10 November 2025
DCU

DCU Sophie 34157095 Manual

2 November 2025
Denver

Denver SWG-345 Manual

31 Oktober 2025
Nilox

Nilox NXSWONAIR Manual

30 Oktober 2025
Bauhn

Bauhn AFTWS-0825 Manual

8 Oktober 2025
Honor

Honor Band 10 Manual

4 Oktober 2025
Suunto

Suunto Race 2 Manual

3 Oktober 2025
Realme

Realme Buds Air Neo Manual

3 Oktober 2025