Sekonda Hybrid 30150 Manual

Sekonda Smartwatch Hybrid 30150

Læs gratis den danske manual til Sekonda Hybrid 30150 (26 sider) i kategorien Smartwatch. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Sekonda Hybrid 30150, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/26
SEKONDA HYBRID SMART WATCH INSTRUCTIONS
(30149, 30150)
GETTING STARTED
1. Digital Display
2. Buon
3. Heart Rate Sensor
4. Charging Pins
WEARING YOUR
SMART WATCH
For the best data
accuracy, please follow
these guidelines while
wearing your watch.
- Posion
your watch approximately two nger-widths from your
hand.
- For a comfortable t, adjust the strap or
bracelet to allow a nger width between it and your
wrist.
POWERING ON YOUR SMART WATCH
- To turn your smart watch on press and hold the
buon unl the screen lights up.
- If the watch doesn’t power on, connect the
magnec charging cable to the back of the watch, and
leave it to charge for at least 10 minutes before trying
again.
THE SEKONDA HYBRID APP
Download and install
- To download the app please scan the QR code using
your smartphone camera, or search for “Sekonda
Hybrid” in the app store on your smartphone.
- The Sekonda Hybrid app is compable with
smartphones running Android version 8.0 and above,
or Apple iOS version 12.0 and above.
Connect your smart watch to the app
- Open the app, read through and accept the permissions to connue.
- Enter your name and details, add a photo (oponal).
- Set your steps, distance, calories, and sleep goals.
- Select and pair your smart device. Your watch will appear in the list of
nearby Bluetooth devices as “Sek-Hybrid”.
- Align the watch hands by following the on-screen instrucons in the app.
The correct me will be displayed once completed.
Aer connecng, a message may be displayed prompng you to update to
the latest version. Follow the on-screen instrucons to do this. This is
important to ensure all features of your watch will work correctly. If your
smart watch disconnects you can reconnect it by tapping on the cog icon on
the app home page and selecng “Connect Smart Device”.
Synchronise data with the app
- Aer your watch is paired with the app, you can synchronise data the
watch has recorded.
- Please sync your app daily to avoid loss of recorded data. Data on the
watch is reset at midnight every day.
- On the home screen of the app, swipe down to sync data with the watch.
For the app to funcon correctly please take noce of the following:
- Do not pair the watch directly with the Bluetooth in your phone’s
sengs.
Always pair the watch through the app.
- Do not turn o Bluetooth in your phone’s sengs.
- If you would like to receive nocaons from the app, you must accept the
app’s permissions.
SET UP
Align the Watch Hands
- Over me, the watch hands may gradually deviate from their
correct posions. You can x this by aligning the watch hands via the
Sekonda Hybrid app.
- Aer pairing your watch with the app, tap on the cog icon, then
select “Smart Device Sengs”.
- Tap on “Align Watch Hands” and follow the on-screen
instrucons to re-align the watch hands.
- Select “hour” or “min” to choose which hand you wish to align
and then proceed to align both hands to the 12 posion.
- Use the wheel to change the hands in big increments or use the
plus/minus signs to change the hands in small increments. - Aer both of
the hands are aligned to the 12 posion press save. - The smart watch will
now automacally adjust the hands to the me of your phone.
Please note: The analogue watch hands will display the correct me for 1-
2 days aer your watch is dead. If the watch is dead for an extended
period, you may need to realign the hands.
While the touch screen funcon is being used, the analogue watch hands
will assume a temporary posion to allow for clear use of the touch
screen.
NOTIFICATIONS
- In the app, tap on the cog icon, then select “Nocaons”. - Set
which app nocaons you would like to be displayed on your
smart watch.
OTHER SETTINGS
In the app, tap on the cog and then select “Smart Device Sengs”. You will
nd the following sengs:
- Find My Smart Device – your smart watch will vibrate so that you can nd
it.
- Camera Shuer – Use your smart watch as a remote camera shuer.
- Set the me format for your watch to 12hr or 24hr format.- Add a
Reminder – set up to 5 daily reminders. Your watch will vibrate at the set
me to remind you.
- Turn Do Not Disturb on/o or set it for a scheduled me period. Your
watch will turn o nocaons and vibraon.
In the app, tap on the cog and then select “Acvity and Wellness”. You will
nd the following sengs:
- Daily Goal – edit your daily steps/distance/calories/sleep goals- Heart Rate
Detecon – Turn on/o connuous heart rate detecon. Set how oen you
would like your watch to measure your heart rate. - Cycle
Tracking – Set up your watch to track your periods and turn
on/o reminders.
- Health Reminder – Set up Sedentary or Drink Water alerts.
USING YOUR SMART WATCH THE SMART WATCH
INTERFACE
- Press the buon or turn your wrist to wake up the smart
watch screen.
- You can turn on/o the “Smart Wake Up” funcon in the
app by tapping on the cog then selecng “Smart Device
Sengs” > “Smart Wake Up”.
- Cycle through the dierent funcons by swiping le and right.
- Alternavely, you can press the buon to cycle through the funcons.
- Tap the screen or press and hold the buon to select a funcon.
CHANGING YOUR WATCH SCREEN STYLE
- On the home screen (the screen displaying the clock), press and hold the
buon to swap between screen styles.
DOWNLOADING MORE DIAL STYLES
- Open the app and tap the watch face icon in the boom right of the
screen.
-Here you can browse dierent dial designs.
- To select a dial and add it to your watch, tap it and then tap “OK”.- Make
sure your watch is close to your phone. The app will display a loading bar
while data is transferred. -The new dial will then be displayed on your
watch.
FUNCTIONS
Steps
Heart Rate Measurement
Blood Oxygen
Sleep - The watch will display your total sleep me for the previous night.
- The watch will measure sleep mes between 21:00 – 9:00 the next day- To
view more detailed informaon on your sleep including deep and light
sleep, please check the app.
Weather - Aer your watch has been connected to the Sekonda Hybrid app,
it will display local weather informaon. Swipe down on the app home
screen to sync up-to-date weather informaon.
Message - When connected, nocaons from your phone will be sent to
your watch. View new messages/nocaons here.
- Make sure to accept the permissions for nocaons on your phone for
this to funcon correctly.
Sport - In this mode you can select from 14 sports modes to record data
during the acvity.
- Data that is recorded can include me, heart rate, steps and calories
burned, depending on which acvity is selected.
- Press the buon or swipe le to cycle through the dierent data being
recorded while in a sports mode.
- Press and hold the buon to pause the acvity.
- Then press the buon to switch between the pause and stop screens. -
Press and hold the buon on the corresponding icon to pause or stop the
acvity.
- Sports modes include: Walking, running, hiking, treadmill, indoor cycling,
workout, tennis, ellipcal, rowing, stairs, yoga, skipping, golf, cycling.
Please note: Aer cycling through all the sports modes you will return to
the main watch menu. Alternavely, you can also swipe le on the smart
watch screen unl you leave the sports mode selecon.
Stopwatch - Hold down the buon to start the stopwatch. - Press the
buon once to pause the stopwatch. Press the buon again to switch
between the play and stop screens. Press and hold the buon on the
corresponding icon to pause or stop the acvity.
Music - Press and hold the buon to enter this funcon.
- Press the buon to cycle through the back, play/pause, and skip funcons.
- Press and hold the buon to select any of the above funcons.
Camera - Press and hold the buon to enter this funcon. - With the
app open on your phone, you can use your watch as a remote camera
shuer.
- On your watch, either tap the screen or press the buon to take a photo
with your smart phone.
Find phone - Press and hold the buon to enter this funcon. - Press and
hold the buon again to start the ‘nd phone’ funcon. Your smart phone
will beep to help you locate it.
- If your phone is on silent your phone may not display any sound.
Exhale - Press and hold the buon to enter this funcon.
- Press and hold the buon again to begin the guided breathing exercise.-
The exercise will last for 1 minute.
Menstrual cycle - To use this feature, open the app and tap on the cog
icon. Tap on “Acvity & Wellness” > “Cycle Tracking”
and turn this on. To view cycle informaon on your
watch tap “Menstrual Period only” then turn on the
“Watch reminder”
CHANGING THE STRAP - The strap on the smart
watch is removable and interchangeable with other
22mm watch straps. - Turn the watch over and locate
the quick release bar as pictured.
- Slide the quick release bar across to separate the
strap from the watch.
SAFETY AND CARE INSTRUCTIONS
Quick
release
Internaonal Protecon Rang (Water Resistance) Your smart watch is
IP68 rated, meaning it has complete protecon from the ingress of dust,
and is protected from connuous immersion in water up to a depth of
1.5metres for a maximum of 30 minutes. Please note that salt water or
certain chemicals in water may damage or weaken the watch seals,
especially with repeated exposure.
To ensure your watch stays in good funconing condion it is recommended
that you:
- Do not press the buons while your watch is submerged.
- Do not use the watch when swimming, diving, or snorkelling. - Do not
aempt to charge the watch while it is wet.
Please note that the watch’s touch screen will not funcon while
submerged in water.
If your watch is exposed to water, always dry it fully with a so cloth.
If your watch is exposed to any other liquids such as salt water, swimming
pool water, soapy water, perfume, sunscreen, hand saniser, cosmecs,
or other chemical products; wash it with clean water and dry it fully
with a so cloth.
The watch’s funconality may be aected if these instrucons are not
followed.
- Do not aempt to disassemble your smart watch. This may cause a
safety hazard, could damage your watch, and/or aect the water
resistance.
- Do not use hair dryers, blowers, or any other heated equipment to
dry your watch. Don’t operate your watch near radiators or heat
sources. This could cause damage to your watch. - Do not place heavy
objects or exert strong pressure on your smart watch.
- Avoid using the watch in extremely high or low temperature
environments.
- Avoid using the watch in high humidity environments. This could
aect the water resistance of the watch. - Protect your smart watch
from long exposure to direct sunlight.
Please note that the measurement results of this device are for
reference only and are not intended for medical use. Users should
always follow the advice of their doctor or other trusted medical
professional.
When using your smart watch on aeroplanes, in hospitals, or near medical
electronic systems please follow the authority standards and be aware
that wireless signals transmied could impact the funconality of
sensive electronics.
PRODUCT SPECIFICATION
Model
Sekonda 30149,30150
CPU
PIXART PAR2860QN
Memory
RAM 32KB + ROM 16MB
Capacive touch screen
0.95” AMOLED display
120*240 screen
Bluetooth version
5.3
Baery
Lithium-ion 3.7V/230mAh
Compable Operang Systems
iOS 12.0 and above, Android
8.0
and above
Water resistance
IP68
How to unpair your smart watch from your phone
- Open the app and tap on the cog.
- Tap “Disconnect Device”.
- The app will ask for conrmaon. Tap “OK”.
How to restore your watch to factory sengs - To clear all data
from your watch and restore it to factory sengs short press the
buon repeatedly to cycle through the funcons unl you reach
“More”. Hold down the buon to select this. - Press the buon
repeatedly to cycle through the funcons unl you reach “Reset”.
Hold down the buon to select this. - “OK” will appear on
the screen. Hold down the buon again to reset the watch.
If for any reason you need to return your watch to us,
please restore your Hybrid smart watch to factory sengs
before sending it.

Produkt Specifikationer

Mærke: Sekonda
Kategori: Smartwatch
Model: Hybrid 30150

Har du brug for hjælp?

Hvis du har brug for hjælp til Sekonda Hybrid 30150 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Smartwatch Sekonda Manualer

Sekonda

Sekonda Active 1909 Manual

15 August 2025
Sekonda

Sekonda Motion Pro 30240 Manual

13 August 2025
Sekonda

Sekonda Motion Plus 30221 Manual

13 August 2025
Sekonda

Sekonda Alpine GPS 30180 Manual

13 August 2025
Sekonda

Sekonda Flex 40453 Manual

12 August 2025
Sekonda

Sekonda Track 30169 Manual

12 August 2025
Sekonda

Sekonda Hybrid 30150 Manual

12 August 2025
Sekonda

Sekonda Flex Plus 40667 Manual

15 Juni 2025
Sekonda

Sekonda Active Pro 30238 Manual

15 Juni 2025

Smartwatch Manualer

Nyeste Smartwatch Manualer

Bauhn

Bauhn AFTWS-0825 Manual

8 Oktober 2025
Honor

Honor Band 10 Manual

4 Oktober 2025
Suunto

Suunto Race 2 Manual

3 Oktober 2025
Realme

Realme Buds Air Neo Manual

3 Oktober 2025
Realme

Realme Watch S Manual

3 Oktober 2025
Garmin

Garmin HRM 200 Manual

2 Oktober 2025
Honor

Honor Watch 5 Ultra Manual

1 Oktober 2025
SuperSonic

SuperSonic SC-61SW Manual

1 Oktober 2025
Xiaomi

Xiaomi Smart Band 10 Manual

1 Oktober 2025
SuperSonic

SuperSonic PowerX-fit Manual

30 September 2025