Silverstone Krypton KR02 Manual

Silverstone Computer køling komponent Krypton KR02

Læs gratis den danske manual til Silverstone Krypton KR02 (2 sider) i kategorien Computer køling komponent. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Silverstone Krypton KR02, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

SPECIAL FEATURES

High performance CPU cooler

NO.G11235861

INTRODUCTION

Intel Installation Guide

2019

Krypton Series

KR02

65w

▓ Advanced silence and performance

▓ Reroute design on heat-pipe Ø6mm x 3pcs to directly receiving cold air, providing the best cooling performance.

▓ Staggered heat-pipe arrangement helps to maximize airflow over each heat-pipe for optimal cooling performance

▓ Includes compact 92mm PWM fan for excellent cooling and low noise

▓ Universal Socket Compatibility Intel Socket LGA115X/1366/2011/2066 & AMD Socket AM2/AM3/AM4/FM1/FM2

Conrm the motherboard socket

type before installation

Перед тем как приступить к установке, проверьте

тип разъема процессора на материнской плате.

Vor der Installation Motherboard-Sockeltyp

überprüfen

Conrmer le type de che de la carte

mère avant installation

Conrme el tipo de zócalo de la placa

base antes de la instalación

Confermare il tipo di socket della scheda

madre prima dell'installazione

설치 전에 메인보드 소켓 유형을 확인합니다.

安裝前請先確定主機板孔位。

安装前请先确定主机板孔位。

インストール前にマザーボードのソケッ

トのタイプを確認してください。

Warranty Information

This product has a limited 1 year warranty in North America and Australia.

For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.

本产品自购买之日起，于中国地区（不包含澳门，香港特别行政区）享有一年有限责任保固（部分产品为二年，三年或五年）。

详细保固年限请参照官方网站公布之产品型号为依据。https://silverstonetek.com.cn/

1. Product component defects or damages resulted from defective production is covered under warranty.

Defects or damages with the following conditions will be xed or replaced under SilverStone Technology’s jurisdiction.

a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.

b) Damage not caused by natural disaster (thunder, re, earthquake, ood, salt, wind, insect, animals, etc…)

c) Product is not disassembled, modied, or xed. Components not disassembled or replaced.

d) Warranty mark/stickers are not removed or broken.

Loss or damages resulted from conditions other than ones listed above are not covered under warranty.

2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding

shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.

3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone

Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of

prots, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty,

contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.

4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand

purchaser.

5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.

6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone

http://www.silverstonetek.com.

Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping

(or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping

(or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a

Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s ocial website.

Please visit for the latest updates.http://www.silverstonetek.com

Warranty terms & conditions

Additional info & contacts

For North America (usasupport@silverstonetek.com)

SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested.

Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent

back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology

in USA by rst downloading the “USA RMA form for end-users” form from the below link and follow its instructions.

http://silverstonetek.com/contactus.php

For Australia only (support@silverstonetek.com)

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.

You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.

You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Please refer to above “Warranty terms & conditions” for further warranty details.

SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238

(standard international call charges apply)

For Europe (support.eu@silverstonetek.de)

For China (support@silverstonetek.com.cn)

For all other regions (support@silverstonetek.com)

电机组件

金属结构件

塑胶结构件

线缆/ 连接器

介质/其它

包装材料

辅助材

○：表示该有毒有害物质在该部件

所有均质材料中的含量均在GB

/T 26572 规定的限量要求以下。

本表格依据SJ/T 11364的规定编制

×：表示该有毒有害物质至少在该部

件的某一均质材料中的含量超出

GB/T 26572 规定的限量要求。

The Krypton series coolers are designed to provide high performance and value for your CPU. The Krypton

KR02, at only 125mm high including fan, features three 6mm thick copper heat pipes connect to a copper base

designed for Intel / AMD processors. A high quality 92mm PWM fan is included to provide up to 130W* of

cooling power. For users requiring great performance in space limited applications, the KR02 is a great choice.

ตรวจสอบรูของเมนบอร์ดก่อนติดตั้งและ

ไทย

Please clean the surface of CPU then apply

thermal grease evenly on CPU.

Равномерно нанесите прилагаемую термопасту

на процессор .

Reinigen Sie bitte die Oberfläche der CPU

bevor Sie die Wärmeleitpaste gleichmäßig

auftragen.

Appliquez la graisse thermique fournie

uniformément sur la surface du CPU

Por favor, limpie la superficie del

microprocesador antes de aplicar la pasta

termica. Una vez limpio, apliquela de manera

uniforme sobre la CPU.

Applicare in modo uniforme sulla CPU

il composto termico per il dissipatore

di calore fornito in dotazione.

ทาความสะอาดพื้นผิวของ ก่อนที่จะใช้จาระบีความร้อนอย่างเท่าเทียมกันบน CPU

CPU

제공된 방열판 접착제를 CPU에 고르게 바릅니다.

塗抹導熱膏前，請先清潔CPU表面，取出導熱膏後，

並將導熱膏均勻塗抹在CPU上。

涂抹导热膏前，请先清洁CPU表面，取出导热膏后，

并将导热膏均匀涂抹在CPU上。

付属のヒートシンクコンパウンドをCPUにむらなく塗ります。

Mount LGA2011 and INTEL clips and

tighten the nuts.

Установите интеловские зажимы и

закрепите винты .

Setzen Sie die LGA2011 und Intel Clips auf

die Schrauben und verschrauben Sie diese

mit den Schraubmuttern.

Monter les plaque de fixation pour processeur

LGA2011 et INTEL, et serrer les écrous.

Monte los clips de LGA2011, INTEL y

ajuste las tuercas.

Installare i dispositivi di fissaggio LGA2011

ed INTEL e stringere i dadi.

LGA2011과 INTEL 클립을 장착하고 너트를

조이십시오.

裝入INTEL扣具，將4顆螺絲順時針擰緊固定。

裝入LGA2011螺絲及INTEL扣具，將4顆螺絲

順時針擰緊固定。

装入INTEL扣具，将4颗螺丝顺时针拧紧固定。

装入LGA2011螺丝及INTEL扣具，将4颗螺丝

顺时针拧紧固定。

LGA2011とINTELクリップを取り付けて、

ナットを締めます。

Intel Installation Guide AMD Installation Guide

ไทย

Please clean the surface of CPU then apply

thermal grease evenly on CPU.

Равномерно нанесите прилагаемую термопасту

на процессор .

Reinigen Sie bitte die Oberfläche der CPU

bevor Sie die Wärmeleitpaste gleichmäßig

auftragen.

Appliquez la graisse thermique fournie

uniformément sur la surface du CPU

Por favor, limpie la superficie del

microprocesador antes de aplicar la pasta

termica. Una vez limpio, apliquela de manera

uniforme sobre la CPU.

Applicare in modo uniforme sulla CPU

il composto termico per il dissipatore

di calore fornito in dotazione.

CPU

제공된 방열판 접착제를 CPU에 고르게 바릅니다.

塗抹導熱膏前，請先清潔CPU表面，取出導熱膏後，

並將導熱膏均勻塗抹在CPU上。

涂抹导热膏前，请先清洁CPU表面，取出导热膏后，

并将导热膏均匀涂抹在CPU上。

付属のヒートシンクコンパウンドをCPUにむらなく塗ります。

ไทย

ใส่สแควร์ ลงในรูตรงกลางบนแผ่นด้านหลังติดตั้งแผ่นหลังแผ่นเข้ากับเมนบอร์ด spacer

และสอดสกรูลงยึดคลิป และ และขันน็อต LGA2011 INTEL

ไทย

LGA 115x/1366 LGA 2011

Remove the film from the cooler base and

place it on the CPU.

Снимите пленку с основания радиатора

и установите радиатор на процессор .

Folie von der Kühlerbasis entfernen,

diese an der CPU anbringen.

Retirez le film de la base de refroidissement

et placez-le sur le CPU.

Retire la película de la base de refrigeración

y sitúela en la CPU.

Rimuovere la pellicola dalla base del

dispersore di calore e collocarlo sulla CPU.

쿨러 받침대에서 필름을 제거하고

받침대를 CPU에 올려 놓습니다.

將散熱器底部保護貼撕離。

將散熱器本體放置於CPU上。

将散热器底部保护贴撕离。

将散热器本体放置于CPU上。

クーラーベースからフィルムをはがし、

CPUに貼ります。

ถอดฟิล์มออกจากฐานและวางลงบน CPU

ไทย

Remove the film from the cooler base and

place it on the CPU.

Снимите пленку с основания радиатора

и установите радиатор на процессор .

Folie von der Kühlerbasis entfernen,

diese an der CPU anbringen.

Retirez le film de la base de refroidissement

et placez-le sur le CPU.

Retire la película de la base de refrigeración

y sitúela en la CPU.

Rimuovere la pellicola dalla base del

dispersore di calore e collocarlo sulla CPU.

쿨러 받침대에서 필름을 제거하고

받침대를 CPU에 올려 놓습니다.

將散熱器底部保護貼撕離。

將散熱器本體放置於CPU上。

将散热器底部保护贴撕离。

将散热器本体放置于CPU上。

クーラーベースからフィルムをはがし、

CPUに貼ります。

ถอดฟิล์มออกจากฐานและวางลงบน CPU

ไทย

Press the handle to secure cooler

Hook the clip onto motherboard’s cooler

retention bracket

Нажмите на ручку чтобы закрепить кулер ,

Закрепите зажим на кронштейне крепления

кулера материнской платы

Griff zur Sicherung des Kühlers drücken

Klemme an Kühlerhalterung des Motherboards

einhaken

Appuyez sur la poignée pour fixer le refroidisseur

Accrochez l'attache sur le support de retenue

du refroidisseur de la carte mère

Presione la manecilla para asegurar el disipador

Enganche el clip al Bracket de retención para

disipadores de la placa base

Premere la maniglia per fissare il dispersore di

calore

Agganciare il fermaglio alla staffa di ritenzione

del dispersore di calore della scheda madre

핸들을 눌러 쿨러를 고정합니다

클립을 메인보드의 쿨러 고정 브래킷에 끼웁니다

按壓板手以鎖固散熱器

將扣具前後勾住主機板上的處理器散熱座

按压板手以锁固散热器

将扣具前后勾住主板上的处理器散热座

レバーを押してクーラーを固定します

クリップをクーラーリテンションブラケットに

掛けます

กดขาล็อคเพื่อยึ ัวคูลเลอรดต

เกี่ยวขาล็อคเข้ากับขายึดฮีตซิงก์บนเมนบอร์ด์

ไทย