Smart-AVI RKT16-HDX100 Manual

Smart-AVI AV forlænger RKT16-HDX100

Læs gratis den danske manual til Smart-AVI RKT16-HDX100 (2 sider) i kategorien AV forlænger. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Smart-AVI RKT16-HDX100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Rack 16-Port HDMI Extender

CONSOLIDATE SIXTEEN HDMI

EXTENDERS IN ONE RACK UNIT

TO TRANSMITHD SIGNALS

UP TO 150 FEET USING

INEXPENSIVE CAT5E/6 (STP)

Quick Start Guide

VIDEO

Format HDMI

Maximum Pixel Clock 165MHz

Inputs (16) HDMI

Local Outputs (16) HDMI

Remote Outputs (16) RJ-45

Resolution Up to 1920 x 1200 @60Hz or

480p/720i/720p/1080i/1080p

DDC 5 volts p-p(TTL)

Input Equalization Automatic

Cable Length Up to 20 ft

OTHER

Power Internal 110-240 VAC

Dimensions 17” W x 3.5” H x 3.25” D

Weight 10 lbs

Operating Temp. 0-55 °C (32-131°F)

Storage Temp. -20-85 °C (-4-185 °F)

Humidity Up to 95%

NOTICE

The information contained in this document is

subject to change without notice. SmartAVI makes

no warranty of any kind with regard to this material,

including but not limited to, implied warranties of

merchantability and tness for particular purpose.

SmartAVI will not be liable for errors contained

herein or for incidental or consequential damages in

connection with the furnishing, performance or use of

this material.

No part of this document may be photocopied,

reproduced, or translated into another language

without prior written consent from SmartAVI

Technologies, Inc.

800.AVI.2131, 702.800.0005

2455 W Cheyenne Ave, Suite 112

North Las Vegas, NV 89032

SmartAVI.com

TECHNICAL SPECIFICATION

RKT16-HDX100

WHAT’S IN THE BOX

PART NO. DESCRIPTIONQ-TY

RKT16-HDX100 1 16-port HDMI Rack

Mountable Transmitter

Power Cord 1 CCPWR06

Quick Start Guide 1

OVEVIEW

The RKT16-HDX100 is the perfect solution for extending

HDMI signals to a remote location up to 150 feet away. It

is the ideal way to consolidate up to sixteen workstation

computers into one location. It is fully compatible with

MAC, PC and LINUX HDMI standards. Up to sixteen displays

can be extended easily from a rack without the mess or

expense of multiple extenders. Rather than buy multiple

extenders for rack components, and having to nd power

strips or numerous power outlets for the adapters, the

SmartAVI rack series of extenders allows for up to sixteen

inputs and sixteen outputs and one power supply.

FEATURES

• Supports up to 16 HDMI sources

• Supports High Resoluon 1920x1200 60Hz

WUXGA

• Extends up to 150 feet with Cat5e/6 STP cables

• Zero pixel loss with TMDS signal correcon

• DDC from internal table

• Compable with all operang systems

• Local HDMI output for each port

• HDMI 1.3 and HDCP compliance

• Compable with all major DVD players

• Rack Mountable Soluon

• Data recovery for digital video

• Plug-and-play ready

• Uncompressed Video

1. Power off the HDMI source and display.

2. Connect an HDMI cable from the HDMI source to the HDMI IN port of the RKT16-HDX100 transmitter.

3. Optionally connect an HDMI cable from the HDMI OUT port of the RKT16-HDX100 transmitter to the local HDMI display.

4. Connect the RKT16-HDX100 transmitter to the HDX-RX100 receiver using a CAT5e/6 cable (up to 150ft).

5. Connect an HDMI cable from the HDMI OUT port on the HDX-RX100 receiver to the HDMI display

6. Connect the power on the RKT16-HDX100 transmitter plugging in their power adapters (12VDC2A) or provide 12VDC

input from the rear DC input port.

NOTE: If the RX side has connected DC adapter, TX can get the DC power over the CAT5e/CAT6 cable, so leave DC input

port empty. Only 1 power supply is required for both units. (In certain cases, if the receiver has too much drop off power,

we recommend to connect a 12V DC power supply to each receiver

7. Power on the HDMI source, displays and speakers. The RX will read the EDID from the monitor, and then pass the data

into the TX automatically.

INTALLATION NOTE: Do not stack receiver units. Stacking inhibits heat distribution.

HARDWARE INSTALLATION

RKT16-HDX100 FRONT RKT16-HDX100 BACK

HDMI IN

HDMI OUT (Local)

HDMI OUT

CAT5/6

HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX HDX-100-RX

RKT16-HDX100