StarTech.com HB31C5A2CME Manual

StarTech.com USB HUB HB31C5A2CME

Læs gratis den danske manual til StarTech.com HB31C5A2CME (2 sider) i kategorien USB HUB. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 13 anmeldelser. Har du et spørgsmål om StarTech.com HB31C5A2CME, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: December 5, 2024

Rear Side

Front Side

Product ID (HB31C5A2CME)

7-Port Industrial USB-C Hub - USB 3.2 10Gbps, ESD Protection

Component Function

1DC Power Input 7~24 V • Connect a + DC Power Source

2DC 2-Wire Terminal Block

Power Input • Connect a +7~24 V DC Power Source

3Screw Locking USB-C Host

Port

• Connect to a USB-C or USB-A Port on a Host

Computer

• USB 3.2 Gen 2 (10 Gbps)

Product Diagram

1 2

4Power LED

• Indicates if the USB hub is receiving power

from either a USB Host or a DC Power Source

• Solid Green - Receiving Power

• O - Not Receiving Power

5Mounting Brackets

• Wall mount the USB Hub

• Mount the USB Hub to the side/underside of

a Desk

67x Screw Locking USB

Data/Charge Ports

(5x USB-A / 2x USB-C)

• Connect to USB-A and USB-C Peripherals

• USB 3.2 Gen 2 (10 Gbps)

• USB-A Ports Support BC 1.2 for up to 5

V/1.5 A (7.5 W) Charging

• USB-C Ports Support up to 5 V/3 A (15 W)

Charging

77x USB Port Status LEDs

• Indicates if a USB Peripheral is Connected to

the Corresponding Port

• Solid Green - USB Peripheral is Connected

• O - USB Peripheral is Not Connected

Requirements

Host Computer

• USB-C or USB-A Port

Mounting Tools (Optional)

• Mounting Screws x 2

• Phillips or Flat Head Screwdriver

• Writing Utensil

• Level

For the latest drivers, manuals, product information, technical specications, and

declarations of conformance, please visit: www.StarTech.com/HB31C5A2CME

Package Contents

• USB Hub x 1

• 3.3 ft [1 m] USB-C to USB-C Locking Cable x 1

• 3.3 ft [1 m] USB-A to USB-C Locking Cable x 1

• Terminal Block Connector (Attached to the terminal block power adapter)

• Terminal block Power Adapter (NA, JP, UK, EU, ANZ) x 1

• Quick-Start Guide x 1

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Warranty Information

This product is backed by a 2-year warranty.

For further information on product warranty terms and conditions, please refer to .

www.startech.com/warranty

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of

business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.

Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations

or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com

Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Regulatory Compliance

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment to an outlet on a dierent circuit than the receiver.

- Consult the dealer or an experienced radio/TV technician for help.

Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority

to operate the device. If shielded interface cables are included with the product, or if additional components or accessories are

designated for use with the installation, they must be used to ensure compliance with FCC regulations.

ISED Statement / Déclaration d’ISDE

CAN ICES-003(B) / NMB-003(B)

This Class B digital apparatus complies with Canadian ICES-003.

This device complies with ISED Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)

this device may not cause interference, and (2) this device must accept any interference, including interference that may cause

undesired operation of the device.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Le présent appareil est conforme aux CNR d’ISDE Canada applicables aux appareils radio exempts de licence. L’exploitation est

autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’appareil doit accepter tout

brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Note: Ensure the polarity of the power input is correctly matched with the DC 2-Wire

Terminal Block Pins to function properly and to prevent damage to the USB Hub and

any connected peripherals.

Terminal Block Pins

4. Insert the into the . Terminal Block Connector Housing USB Hub

Power the Hub Using a Universal Power Adapter

Connect the to the on the , Universal Power Adapter Power Input Port USB hub

and then plug it into an . AC electrical outlet

Wall Mounting

Note: It is recommended that are used when wall mounting this . Wall Studs Hub

1. Hold the in the desired mounting location. Hub

2. Mark the location of the , using a . Mounting Holes Writing Utensil

3. Draw a line connecting the two , using a .Mounting Holes Level

4. Hold the in the desired mounting location, aligning the on Hub Mounting Holes

the sides of the with the created in step 2. Hub Mounting Hole Marks

5. Insert the (x 2) through the and into the Mounting Screws Wall Mounting Holes

Wall.

6. Tighten the until the is securely fasten to the , using a Mounting Screws Hub Wall

Phillips Head Screwdriver.

Installation

Warning: Connect the Power Source after all the other installation steps have been

completed.

Note: There are two ways to power the . It is recommended to use an USB Hub

external DC Power Source or a Terminal Block Power Source (+7 - 24V DC) connected

to the 2-Wire Terminal Block to ensure full and stable function.

Connect the USB Ports

1. Connect up to Seven USB peripherals to the Screw Locking USB Data/Charge

Ports, USB Hub located on the .

2. Use the Screw Locking USB-C to USB-C USB-A to USB-C Host Cableor the , to

connect a USB port on the to the Computer Screw Locking USB-C Host Port,

located on the USB Hub.

• The will automatically detect the device and install the required Computer

drivers for the .USB Hub

• Only one is required, depending upon which Port Type is available Host Cable

on the Computer. The other can be stored for future use.Host Cable

Power the Hub

Note: This product includes a . If you plan to Terminal Block Power Adapter

power the product using an external terminal block power source, please refer to

the instructions below:

Power the Hub Using the 2-Wire Terminal Block

1. Remove the from the Terminal Block Connector Housing USB Hub’s Included

Power Adapter.

2. Loosen the screws for the located on the , Terminals Terminal Block Connector

using a .Flat Head Screwdriver

3. Connect the and from the (+7 - 24 Positive Negative Wires DC Power Source

V DC) to the on the , the are Terminals Terminal Block Connector Terminals

marked on the . USB Hub’s Casing

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	USB HUB
Model:	HB31C5A2CME

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com HB31C5A2CME stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

USB HUB StarTech.com Manualer

StarTech.com ITB20D3250 Manual

23 Juli 2025

StarTech.com HB31C5A2CME Manual

17 Marts 2025

StarTech.com ST4300MINU3B Manual

6 December 2024

StarTech.com ST4300USB3 Manual

6 December 2024

StarTech.com ST7C51224EU Manual

6 December 2024

StarTech.com ST1030USBM Manual

6 December 2024

StarTech.com ST4200USBM Manual

6 December 2024

StarTech.com ST7300USB3B Manual

6 December 2024

StarTech.com ST4300USB3EU Manual

6 December 2024

StarTech.com ST4300MINU3W Manual

6 December 2024

USB HUB Manualer

Nyeste USB HUB Manualer

Alogic Vrova U32HDDVVG Manual

29 Juli 2025

EXSYS EX-1110HMVS-WT Manual

25 Juli 2025

EXSYS EX-1501HMVS-C Manual

24 Juli 2025

Rocstor Y10A330-B1 Manual

24 Juli 2025

EXSYS EX-1501HMVS-A Manual

24 Juli 2025

EXSYS EX-1163HMS-WT Manual

24 Juli 2025

EXSYS EX-1185HMVS-WT Manual

24 Juli 2025

Røde SC17 Manual

23 Juli 2025

EXSYS EX-1196HMS Manual

23 Juli 2025

NGS Wonder DOCK 4 PRO Manual

23 Juli 2025