
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: June 10, 2024
ST1000SPEX2T / ST1000SPEX2LT / ST1000SPEXD4T
Port/LED/Connector Function
• Used to secure onto the Host Computer
• Low-Prole Bracket is included
Note: ST1000SPEX2LTships with the Low-Prole
• Used to connect a to the Network Cable Network
• Right LED: Link/Activity
• Solid green: Active link
• Flashing green: Activity
• Solid green: 1Gbps link
• Solid orange: 10/100Mbps link
4PCIe p1-x1 Connector • Insert into a PCI Express Slot
PCI Express Gigabit Ethernet Network Card
For the latest requirements, please visit:
www.startech.com/ST1000SPEX2T
www.startech.com/ST1000SPEX2LT
www.startech.com/ST1000SPEXD4T
• Computer with an available PCI Express Slot (x1, x2, x4, x8, or x16)
• Low-Prole Bracket or Full-Height Bracket (ST1000SPEX2LT) x 1
Install the PCI Express Card
Static electricity can cause severe damage to PCI Express cards. Ensure proper
grounding before opening the computer case or touching the PCI Express card. Use
an Anti-Static Strap when installing any computer component. If an Anti-Static Strap
isn’t available, discharge built-up static electricity by touching a large grounded metal
surface for several seconds. Handle the PCI Express card by its edges, avoiding contact
with the gold connectors.
1. Turn o the and any that are connected to it (for Computer Peripheral Devices
example, , , etc.).Printers External Hard Drives
2. Unplug the from the back of the .Power Cable Computer
3. Disconnect any that are connected to the .Peripheral Devices Computer
4. Remove the from the . Consult the documentation that came Cover Computer Case
with the for details about how to do this safely.Computer
5. Locate an open and remove the corresponding PCI Express Slot Slot Cover Plate
from the back of the . Consult the documentation that came with Computer Case
the for details about how to do this safely. This card works in PCI Express Computer
x1, x2, x4, x8, or x16 slots.
*Product may vary from image