StarTech.com ST121WHDS Manual

StarTech.com AV forlænger ST121WHDS

Læs gratis den danske manual til StarTech.com ST121WHDS (2 sider) i kategorien AV forlænger. Denne vejledning er vurderet som hjælpsom af 61 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 31 anmeldelser. Har du et spørgsmål om StarTech.com ST121WHDS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-start guide

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 08/08/2016

For the latest information, technical specications, and support for

this product, please visit www.StarTech.com/ST121WHDS

Packaging contents

• 1 x wireless transmitter

• 1 x wireless receiver

• 2 x universal power adapters (NA, EU, UK)

• 2 x USB power cables

• 2 x vertical stands

• 2 x adhesive mounting strips

• 1 x quick-start guide

Requirements

• A local HDMI® video source, such as a computer or Blu-ray™ player

with cabling.

• A remote HDMI display with cabling.

ST121WHDS

HDMI Over Wireless Extender - 1080p - 65 ft.

*actual product may vary from photos

Preparing your site

1. Set up your local HDMI video source in your desired location, and

position the transmitter near the video source.

2. Set up your remote HDMI display in your desired location, and

position the receiver near your display..

Note:

• The maximum supported distance between the transmitter

and the receiver is 65 feet. If the wireless signal is obstructed

by walls, or other interference the signal quality and maximum

distance may be reduced.

• Ensure there is an available USB power source or an AC power

outlet, at your local and remote locations.

• Ensure each device is powered o before you begin

installation.

Product overview

Transmitter

Receiver

Power port

(Micro-USB)

HDMI

In port

About this product

This HDMI over wireless extender lets you wirelessly transmit the

video and audio signal from an HDMI source to a remote display

located up to 65 ft. (20 m) away. The extender kit uses wireless

technology to transmit an uncompressed, high-denition 1080p

HDMI signal.

Function

button

Link LED

Power LED

Link LED

Power LED Power

button

Power port

(Micro-USB)

HDMI

Out port

Wireless

antenna

Wireless

antenna

Hardware installation

1. Connect an HDMI cable (not included) to the port on HDMI In

the transmitter and to the HDMI video output port on your video

source device.

Note: Both the transmitter and the receiver have a

wireless antenna located on the front surface. For optimal

performance, it’s important to ensure the wireless antennas

on each device are facing toward the general direction of each

other.

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class C device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could void the user’s authority to operate the

equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and

access our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for

repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not

allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

2. Connect the included USB cable to the Power port (Micro-USB)

on the transmitter and to a nearby USB power source. If you’re

using the included power adapter, connect the power adapter

to an AC power outlet and connect the USB cable to the power

outlet.

3. Connect an HDMI cable (not included) to the port on HDMI Out

the receiver and to the HDMI video input port on your display.

4. Connect the included USB cable to the Power port (Micro-USB)

on the receiver and to a nearby USB power source. If you’re using

the included power adapter, connect the power adapter to an AC

power outlet and connect the USB cable to the power outlet.

5. Power up your local video source.

6. Power up your remote display.

LED indicators

The transmitter and receiver each have two LED indicators that light

up to notify you of the video status. Please review the table below to

interpret the LED activity.

LED Activity Status

Link

O The transmitter or receiver is powered o or

in sleep mode.

Slow

blinking

Transmitter and receiver are establishing

connection.

Fast

blinking Transmitter and receiver are connected.

Power

O The transmitter or receiver does not have

power connected.

Solid on The transmitter or receiver is connected to

an active power connection.

Function button

The function buttons, located on the transmitter and receiver, can be

used to perform various tasks. Please review the table below to see

what tasks can be performed, and how to perform them.

Function Description Procedure

Wake up

Takes the transmitter

or receiver out of sleep

mode.

Press and release the

Function button.

Factory

default

Restores the

transmitter or receiver

to original settings.

Press and hold the Function

button for 10 seconds.

Notes:

• Sleep status occurs if the transmitter or receiver fails to establish a

connection after several minutes of attempting.

• The factory default function can be performed as a

troubleshooting step, if your transmitter and receiver are both

powered on and not establishing a connecting.

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	AV forlænger
Model:	ST121WHDS

Har du brug for hjælp?

Hvis du har brug for hjælp til StarTech.com ST121WHDS stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

AV forlænger StarTech.com Manualer

StarTech.com RS232EXTC1EU Manual

1 Januar 2025

StarTech.com NETRS2321EGB Manual

1 Januar 2025

StarTech.com NETRS232_2GB Manual

1 Januar 2025

StarTech.com NETRS232_1GB Manual

1 Januar 2025

StarTech.com NETRS232_1EU Manual

1 Januar 2025

StarTech.com CB420USB Manual

1 Januar 2025

StarTech.com PEXUSB400 Manual

1 Januar 2025

StarTech.com PEX400USB2 Manual

1 Januar 2025

StarTech.com PCIUSB7 Manual

1 Januar 2025

StarTech.com PCI420USB Manual

1 Januar 2025

AV forlænger Manualer

Nyeste AV forlænger Manualer

Genexis Elite HX30 Manual

8 Juni 2025

Genexis Elite HX40 Manual

8 Juni 2025

Provision-ISR PR-HDoNet+ Manual

8 April 2025

Apantac DP-FIB-II Manual

25 Februar 2025

Adder Link X-DVI PRO-DL Manual

28 Januar 2025

Adder Link X100 Manual

28 Januar 2025

Kramer EXT3-U3-T Manual

20 Januar 2025

Kopul XLR4F-RJ45 Manual

14 Januar 2025

Kopul RM-4X4XMFRJ45 Manual

13 Januar 2025

Planet VF-106G-KIT Manual

13 Januar 2025