StarTech.com 4K70IC-EXTEND-HDMI Manual

StarTech.com AV forlænger 4K70IC-EXTEND-HDMI

Læs gratis den danske manual til StarTech.com 4K70IC-EXTEND-HDMI (2 sider) i kategorien AV forlænger. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om StarTech.com 4K70IC-EXTEND-HDMI, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Quick-Start Guide

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.

Manual Revision: August 10, 2022 8:43 AM

Product ID

4K70IC-EXTEND-HDMI

Transmitter

Receiver

Port Function

1Reset Button

• Transmitter and Receiver: Reboots the unit

which will cause a renegotiation of connected

devices

2RJ45 Port

• Connect the and together, Transmitter Receiver

using a (sold separately)CAT6/6a Ethernet Cable

3Power Indicator

• Flashing Blue: Power connected, but no HDMI

input signal is detected

• Solid Blue: Power connected, and a HDMI input

signal is detected

4DC 12V Port

• Power the or using the Transmitter Receiver

included Power Adapter

5HDMI Output Port • Connect to an HDMI Display

6HDMI Input Port • Connect to an HDMI Source Device

7IR Output Port • Connect the to the IR Blaster Transmitter

8Audio Input Selector

• Switch audio input source between Receiver’s

the , or Transmitter’s HDMI Input Port Receiver’s

HDMI Output Port

9Optical Audio Output

• Connect to an on a S/PDIF Input Audio Device

(i.e. A/V Receiver)

10 IR Input Port • Connect the to the IR Receiver Receiver

HDMI over CAT6/6A Extender - 4K 60Hz - 230ft (70m)

Product Information

For the latest product information, technical specications, and declarations of

conformance, please visit: Iwww.StarTech.com/4K70IC-EXTEND-HDM

Package Contents

• Local HDMI Transmitter Unit x 1

• Remote HDMI Receiver Unit x 1

• IR Blaster x 1

• IR Receiver x 1

• Rubber Feet x 8

• Mounting Kit x 1

• Power Adapter x 1

• Quick-Start Guide x 1

Installation

(Optional) Mounting Kit

Note: Before mounting the make sure that the surface you are HDMI Extender

mounting to is strong enough to support the weight of the . It is HDMI Extender

recommended that you mount the on a wall stud to provide the HDMI Extender

correct support.

1. Determine the for the .Mounting Surface HDMI Extender

2. Place the on each side of the . Align the Mounting Brackets HDMI Extender Holes

in the with the on the sides of the Mounting Brackets Holes HDMI Extender’s

Transmitter Receiverand .

3. Insert two through each and into the . Screws Mounting Bracket HDMI Extender

4. Tighten each using a .Screw Phillips Head Screwdriver

5. Mount the to the desired using the appropriate HDMI Extender Mounting Surface

Mounting Hardware (e.g. Wood Screws).

Installing the HDMI Transmitter and Receiver

1. On the , use the to set which audio output the Transmitter Audio Output Selector

setup requires.

Note: If changing the audio output after initial installation, a power cycle may be

required.

2. Position the near the .Transmitter HDMI Source Device

3. Connect an (not included) from the to the HDMI Cable HDMI Source Device HDMI

Input Port Transmitter on the .

4. (Optional) Connect an (not included) from the on HDMI Cable HDMI Output Port

the , to a .Transmitter Local HDMI Display

1 2 3 4 5 6 7

1 8 2 3

4 9 5 10

Regulatory Compliance

FCC - Part 15

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could

void the user’s authority to operate the equipment.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (B)/NMB-3(B)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two

conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may

cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation

est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique

subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and

Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-

party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only

and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which

this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered

trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the

property of their respective holders.

Warranty Information

This product is backed by a two-year warranty.

For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)

for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss

of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the

product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the

limitations or exclusions contained in this statement may not apply to you.

FR: startech.com/fr

DE: startech.com/de

ES: startech.com/es

NL: startech.com/nl

IT: startech.com/it

JP: startech.com/jp

StarTech.com

Ltd.

45 Artisans Cres

London, Ontario

N5V 5E9

Canada

StarTech.com Ltd.

Unit B, Pinnacle 15

Gowerton Rd,

Brackmills

Northampton

NN4 7BW

United Kingdom

StarTech.com LLP

4490 South Hamilton

Road

Groveport, Ohio

43125

U.S.A.

StarTech.com Ltd.

Siriusdreef 17-27

2132 WT Hoofddorp

The Netherlands

Operation

Audio Input Selector

The can be used to change which is used Audio Input Selector Switch Audio Source

for the unit, depending on the requirements of the setup.Receiver

Note: Audio will output through the in both modes. For , S/PDIF Port ARC Mode HDMI

Audio Return Channel HDMI Display. support is required on the

Audio Input

Selector Mode

Receiver Audio Source

S/PDIF HDMI Audio from Transmitter – Audio of the HDMI

Source is output.

ARC HDMI Audio from the display on the receiver side is

output.

Connection Diagram

5. Position the near the .HDMI Receiver HDMI Display Device

6. Connect a (not included) from the on the to CAT5e/6 Cable RJ45 Port Transmitter

the on the .RJ45 Port Receiver

Note: The cabling cannot go through any networking equipment (e.g. router, switch,

etc.).

7. Connect an (not included) to the on the HDMI Cable HDMI Output Port Receiver

and to the .HDMI Display Device

8. (Optional) Connect a from the on the Toslink (S/PDIF) Cable Optical Audio Output

Receiver Optical Audio Input Audio Device, to a on an (i.e. A/V Receiver)

9. Connect the included to the on the Universal Power Adapter DC 12V Port

Transmitter Receiver Electrical Outlet or and to an .

Note: For optimal performance, it is recommended to power the HDMI Extender Kit

through the unit. However, it is possible to power the Transmitter HDMI Extender Kit

through the unit by connecting the to the Receiver Universal Power Adapter Receiver

unit.

Installing the IR Blaster and IR Receiver

Control the HDMI Source Device from the Receiver’s location

1. Connect the (Labelled “IR Out”) to the on the .IR Blaster IR Output Port Transmitter

2. Peel the o of the that is located on the . Position the Film Adhesive Pad IR Blaster

IR Blaster IR Sensor HDMI Source Device so that it is pointing directly at the on the .

Note: Consult the manual to determine the location of the HDMI Source Device’s IR

Sensor.

3. Connect the (Labelled “IR In”) to the on the . IR Receiver IR Input Port Receiver

4. Peel the o of the that is located on the . Position Film Adhesive Pad IR Receiver

the in a location where there is a clear path to the .IR Receiver Remote Control

5. Use the for the to control the Remote Control HDMI Source Device HDMI Source

Device Receiver’s from the location.

Produkt Specifikationer

Mærke:	StarTech.com
Kategori:	AV forlænger
Model:	4K70IC-EXTEND-HDMI
Type:	AV sender & modtager
Vekselstrømsindgangsspænding:	100 - 240 V
Bredde:	99 mm
Dybde:	106 mm
Højde:	26 mm
Vægt:	210 g
Produktfarve:	Sort
Pakkevægt:	900 g
Pakkedybde:	176 mm
Pakkebredde:	240 mm
Pakkehøjde:	80 mm
Opbevaringstemperatur (T-T):	-30 - 70 °C
Relativ luftfugtighed ved drift (H-H):	0 - 90 %
HDCP:	Ja
Digital akustisk og optisk udgang:	1
Strømforbrug (typisk):	0.1 W
Driftstemperatur (T-T):	-20 - 60 °C
Maksimal opløsning:	3840 x 2160 pixel
Hurtig start guide:	Ja
Understøttede grafikopløsninger:	1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 1920 x 1200 (WUXGA), 2560 x 1600 (WQXGA), 3840 x 2160
High Dynamic Range (HDR) understøttet:	Ja
Materiale:	Metal
Forbindelsesteknologi:	Ledningsført
Lyd-output kanaler:	7.1 kanaler
DC-in-stik:	Ja
LED-indikatorer:	Ja
Udgangsstrøm:	1 A
AC-adapter inkluderet:	Ja
Bæredygtighedscertifikater:	CE, RoHS
Hovedkassen højde (udvendigt):	420 mm
Hovedkassens længde (udvendigt):	270 mm
Hovedkassens bredde (udvendigt):	380 mm
Plug and play:	Ja
Indgangsstrøm:	0.3 A
Maksimal overførselsafstand:	70 m
Maksimal opdateringshastighed:	60 Hz
HDMI-version:	2.0
Ekstern strømadapter:	Ja
Produkter pr. hovedkasse (udvendigt):	10 stk
Overholdelse af bæredygtighed:	Ja
Monteringssæt:	Ja
Strømstiktype:	Type M
HSMI-indgang:	1
RJ-45 indgangs-porte:	1
Antal HDMI-udgange:	2
Stativ-montering:	Ingen
HDCP-version:	2.2
Fjernbetjening (IR) indgang:	1
Fjernbetjening (IR) udgang:	1
Understøttede kabeltyper:	Cat5e, Cat6
RJ-45 udgangs-porte:	1
Gummifødder:	Ja
Driftsspænding (sender):	12 V
Daisy kæde:	Ja
IR blaster inkluderet:	Ja
IR-modtager inkluderet:	Ja
Elektrostatisk udledningsbeskyttelse (ESD):	Ja
Elektrostatisk afladning association (ESD):	8 kV