Sun Joe SWJ800E Manual

Sun Joe Sav SWJ800E

Læs gratis den danske manual til Sun Joe SWJ800E (60 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 42 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 21.5 anmeldelser. Har du et spørgsmål om Sun Joe SWJ800E, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/60
© 2022 by Snow Joe
®, LLC
All rights reserved. Original instructions. SAVE THESE INSTRUCTIONS
1
EN
A Division of Snow Joe
®, LLC
R
OPERATOR’S MANUAL
Model SWJ800E Form No. SJ-SWJ800E-880E-MR9
ELECTRIC POLE CHAIN SAW
8-INCH | 6.5-AMP
IMPORTANT!
Safety Instructions
All Operators Must Read These
Instructions Before Use
Always follow these safety guidelines. Failure to do so may
result in serious bodily injury or death.
mDANGER! This indicates a hazardous situation, which,
if not followed, will result in serious injury or death.
mWARNING! This indicates a hazardous situation, which,
if not avoided, could result in serious injury or death.
mCAUTION! This indicates a hazardous situation, which,
if not avoided, could result in minor or moderate injury.
General Safety
mWARNING! When using electric yard tools, basic safety
precautions should always be followed to reduce the risk of
re, electric shock, and personal injury, including the following:
1. Keep guards in place – Protective guards should be
checked periodically to ensure they are properly tted and
in correct working order.
2. Remove adjusting keys and wrenches – Check that
adjusting wrenches are removed from the saw before
turning it on.
3. Keep work area clean and well-lit – Clear work area of
branches and limbs after each cutting session. Cluttered
areas invite accidents.
4. Do not use in dangerous environments – Do not use the
pole chain saw in damp or wet locations.
5. Do not use the pole chain saw in the rain.
6. Keep bystanders and children away – All bystanders,
including children and pets, should be kept a safe
distance away from the work area.
7. Do not force the tool – It will do the job eectively and
safely if it is used at the rate for which it was designed.
8. Use the right tool – Do not force the tool or any
attachment on the tool to do a job for which they were
not designed.
9. Wear proper apparel – Do not wear loose articles of
clothing or jewelry since such items may get caught
in moving parts. Use of heavy-duty rubber gloves,
substantial non-skid footwear, and close-tting clothing is
recommended when working outdoors with power tools.
10. Wear protective hair coverings to contain long hair.
11. Always wear safety glasses and ear defenders to
provide eye and ear protection – Everyday eyeglasses
only have impact resistant lenses and do not provide the
same protection as safety glasses.
12. Wear face or dust masks – If the cutting operation is
dusty, the use of a face or dust mask specially designed
to lter out microscopic particles is recommended.
13. Do not overreach – Keep proper footing and balance
at all times.
14. Maintain tools with care – Keep tools sharp and clean
for best and safest performance. Follow instructions for
lubricating and changing accessories.
15. Disconnect tool – Disconnect the pole chain saw from
the power supply when not in use, before servicing,
when transporting, or when changing the chain or other
accessories.
16. Reduce the risk of unintentional starting – Make sure
the switch is in the OFF position before plugging the tool
into a power source.
17. Use recommended accessories – Consult the owner’s
manual for recommended accessories. The use of
improper accessories may cause risk of injury.
18. Check for damaged parts – Before each use, repair or
replace any guard or part that is damaged. In addition,
check for alignment of moving parts, binding of moving
parts, breakage of parts, and any other conditions that
may aect the tool's operation.
19. Never leave tool unattended while it is running –
Turn the power OFF by removing the power cord directly
from its socket. Do not leave the saw until the cutting
chain comes to a complete stop.
20. Avoid unintentional starting – Do not carry the pole
chain saw with your nger on the switch.
21. Do not grasp the exposed cutting blade or cutting
edges when picking up or holding the saw – Be sure to
encase the cutting bar in its protective sheath when not
in use.
22. Stay alert – Watch what you are doing. Use common
sense. Do not operate the pole chain saw when you are
tired.
23. Store idle tool indoors – When not in use, appliances
should be stored indoors in a dry and high or locked-up
place out of the reach of children.

Produkt Specifikationer

Mærke: Sun Joe
Kategori: Sav
Model: SWJ800E

Har du brug for hjælp?

Hvis du har brug for hjælp til Sun Joe SWJ800E stil et spørgsmål nedenfor, og andre brugere vil svare dig


Sav Sun Joe Manualer

Sun Joe

Sun Joe BDL-A0203 Manual

10 August 2025
Sun Joe

Sun Joe 20VIONLTE-PS8-RM Manual

10 August 2025
Sun Joe

Sun Joe 24V-HCSWP-6-LTE Manual

29 Juli 2025
Sun Joe

Sun Joe SWJ802E-PRP Manual

14 November 2024
Sun Joe

Sun Joe 24V-CSSHRP-CT-RM Manual

1 Januar 2024
Sun Joe

Sun Joe SWJ599E-RM Manual

24 December 2023
Sun Joe

Sun Joe 24V-PS10-CT Manual

24 December 2023
Sun Joe

Sun Joe SWJ800E-RM Manual

16 December 2023
Sun Joe

Sun Joe 24V-CSSHRP-LTE-RM Manual

22 November 2023
Sun Joe

Sun Joe ION16CS-RM Manual

26 August 2023

Sav Manualer

Nyeste Sav Manualer

RIKON

RIKON 10-1414 Manual

1 November 2025
RIKON

RIKON 10-3062 Manual

31 Oktober 2025
Dedra

Dedra DED7338 Manual

31 Oktober 2025
SereneLife

SereneLife PSLTLL1516 Manual

19 Oktober 2025
Proviel

Proviel HFS 518 Manual

16 Oktober 2025
Proviel

Proviel TK 600 Manual

16 Oktober 2025
Hurricane

Hurricane ES 2040/1 S Manual

16 Oktober 2025
Hurricane

Hurricane MKS 38/41 Manual

16 Oktober 2025
Alpha Tools

Alpha Tools TK 1500 E Manual

13 Oktober 2025
Alpha Tools

Alpha Tools KS 250 Manual

13 Oktober 2025