Tripp Lite SmartPro SMART1000RMXL2U Manual

Tripp Lite UPS SmartPro SMART1000RMXL2U

Læs gratis den danske manual til Tripp Lite SmartPro SMART1000RMXL2U (60 sider) i kategorien UPS. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Tripp Lite SmartPro SMART1000RMXL2U, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/60
1
Owner’s Manual
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2018 Tripp Lite. All rights reserved. SmartPro
® is a registered trademark of Tripp Lite.
Important Safety Instructions 2
Mounting 4
Quick Installation 6
Optional Installation 7
Basic Operation 9
Storage and Service 17
Battery Replacement 18
Warranty Registration 20
Español 21
Français 41
SmartPro® 2U Rackmount
Intelligent, Line-Interactive UPS Systems
120V Sine Wave Output • 1,000VA—1,500VA
SMART1500RMXL2UA
(AG-0006, AG-02F7)
SMART1500RM2U
(AG-0007, AG-02F8)
SMART1000RMXL2U
(AG-0011, AG-02F9)
Not suitable for mobile applications.
PROTECT YOUR INVESTMENT!
Register your product for quicker service
and ultimate peace of mind.
You could also win an
ISOBAR6ULTRA surge protector—
a $100 value!
www.tripplite.com/warranty
18-05-213-933148.indb 1 7/13/2018 1:04:15 PM
2
Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains important instructions that should be followed during the installation,
operation and storage of this product. Failure to heed these warnings may affect the warranty.
UPS Location Warnings
• Use caution when lifting the UPS. Because of the considerable weight of all rackmount UPS
systems, at least two people should assist in lifting and installing them.
• Install the UPS indoors, away from excess moisture or heat, dust or direct sunlight.
• For best performance, the ambient temperature near the UPS should be between 0° C and 40° C
(between 32° F and 104° F).
• Leave adequate space around all sides of the UPS for proper ventilation. Do not obstruct its vents
or fan openings.
• When mounting the UPS system in a tower orientation, make sure the LCD Screen panel is at the
top of the UPS, not at the bottom.
• Do not mount unit with its front or rear panel facing down (at any angle). Mounting in this manner
will seriously inhibit the unit’s internal cooling, eventually causing product damage not covered
under warranty.
UPS Connection Warnings
• The UPS contains its own energy source (battery). The output terminals may be live even when
the UPS is not connected to an AC supply.
• Connect the UPS to a properly grounded AC power outlet. Do not modify the UPS’s plug in a way
that would eliminate the UPS’s connection to ground. Do not use adapters that eliminate the
UPS’s connection to ground.
• Do not plug the UPS into itself; this will damage the UPS and void your warranty.
• If you are connecting the UPS to a motor-powered AC generator, the generator must provide
filtered, frequency-regulated computer-grade output. Connecting the UPS to a generator will void
its Ultimate Lifetime Insurance.
• Install in accordance with National Electrical Code standards ANSI/NFPA 70 and Canadian
Electrical Code, Part I, C22.1.
• Short circuit backup protection and overcurrent protection are provided by the building installation
for permanently connected models.
• To reduce the risk of fire, connect only to a circuit provided branch circuit overcurrent protection
in accordance with the National Electrical Code, ANSI/NFPA 70 and the Canadian Electrical Code,
Part I, C22.1. Be sure to use maximum 20A overcurrent protection, in accordance with the plug/
equipment rating, for the installation.
• The plug on the power supply cord is intended to serve as the disconnect device. Be sure that the
socket-outlet is installed near the equipment and is made easily accessible.
Caution! This UPS may receive power from more than one source. Disconnection
of the AC and DC sources is required to de-energize the unit before servicing.
18-05-213-933148.indb 2 7/13/2018 1:04:15 PM

Produkt Specifikationer

Mærke: Tripp Lite
Kategori: UPS
Model: SmartPro SMART1000RMXL2U

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite SmartPro SMART1000RMXL2U stil et spørgsmål nedenfor, og andre brugere vil svare dig


UPS Tripp Lite Manualer

Tripp Lite

Tripp Lite ECO750UPS Manual

30 December 2025
Tripp Lite

Tripp Lite SmartOnline SU5000XFMRT2U Manual

4 Oktober 2024
Tripp Lite

Tripp Lite SMART700DV Manual

29 September 2024
Tripp Lite

Tripp Lite S3MT-60KWR480V Manual

18 September 2024
Tripp Lite

Tripp Lite ECO650LCD Manual

13 September 2024
Tripp Lite

Tripp Lite OmniSmart OMNISMART700TSU Manual

10 September 2024
Tripp Lite

Tripp Lite ECO1300LCD Manual

30 August 2024
Tripp Lite

Tripp Lite SmartOnline SU1000RTXLCD2U Manual

16 August 2024
Tripp Lite

Tripp Lite OMNI700LCDT Manual

14 August 2024
Tripp Lite

Tripp Lite BC350 Manual

4 August 2024

UPS Manualer

Nyeste UPS Manualer

APC

APC RBC150 Manual

2 April 2025
APC

APC RBC151 Manual

2 April 2025
APC

APC Symmetra LX 4kVA Manual

30 Marts 2025
APC

APC RBC145J Manual

29 Marts 2025
APC

APC RBC140J Manual

29 Marts 2025
APC

APC AP9922 Manual

29 Marts 2025
APC

APC RBC148 Manual

29 Marts 2025
Teltonika

Teltonika BAT120 Manual

30 Januar 2025
APC

APC BX1000M Manual

30 Januar 2025
APC

APC BX850 Manual

30 Januar 2025