UPM RT601 Manual

UPM Skifte RT601

Læs gratis den danske manual til UPM RT601 (4 sider) i kategorien Skifte. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 12 anmeldelser. Har du et spørgsmål om UPM RT601, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

GETTING STARTED battery installation

COUNTDOWN TIMER

PROGRAM

ON/OFF CD

SET

RANDOM

RESET

remove the battery cover from

the back of the timer

place two button cell batteries

between terminals observing

proper polarity then replace cover

PROGRAM

ON/OFF CD

SET

RANDOM

RESET

57 9

2 4 6 8

Press SET

Day select with

Press SET

Hour select with

Press SET

Minute select with

5 7 9

2 4 6 8

Press SET

Second select with

Press SET

Start ON or OFF select with

Press SET

Hour select with

Press SET

Minute select with

Press SET

Second select with

Press SET

Minute select with

CLOCK

The to-the-second countdown feature of this timer starts from the ON or OFF

position and counts down to zero when activated.

Press once from

LEAR N

PROGRAM

ON/OFF CD

SET

RAN DOM

RESET

Go to using

CLOCK

To activate/deactivate Daylight Saving Time (DST) function, press

and hold both and together for 3 seconds in mode;

solid for DST.

To toggle between 12/24 hour format, press RANDOM during

clock setting.

Stop countdown timer function with CD or ON/OFF

remove the battery cover from

the transmitter

place two AA size batteries into

compartment observing proper

polarity then replace cover

button descriptions

COUNTDOWN

SET

ON/OFF

RANDOM

RESET

PROGRAM

TIMER OPERATION

Programmable Timer Photocell Transmitter

RCT100 + RT601

Programmable Timer with

Wireless Photocell Transmitter

OWNERS

MANUAL

Congratulations on your

purchase of a UPM remote

control product. Please

take the time to read and

understand this manual so

you can begin to enjoy the

convenience and energy

saving benefits this product

has to offer.

433 M z RF technology

Activates timer at dusk

Timing Control Dial -

(30mins, 1, 2, 4, 6, 8,

10hrs, or continuous

Brightness Dial - for light

sensitivity adjustment

Transmission range: up

to 40m in open area

PROGRAM SETTINGS

disable program/master disable

PROGRAM

ON/OFF CD

SET

RANDOM

RESET 1

5 7

2 4 6 8

PROGRAM

ON/OFF CD

SET

RANDOM

RESET 1

Press SET

Day select with

Press SET

Hour select with

Press SET

Minute select with

Press SET

Program select with

2Press SET

Press ON/OFF to disable ( )X

For select PROGRAM with

or go to using

single disable

F master disable

Press SET 3 times to exit (single disable)

OR press SET 4 times to exit (master)

CLOCK

Programs are arranged in a circular pattern

with the clock and countdown functions:

CLOCK Program 1-20 CD

Repeat steps to to undo disable )( X

LEARN

PROGRAM

ON/OFF CD

SET

RANDOM

RESET

Press CD to start the countdown function

TIMING CONTROL DIAL

MODE SWITCH BRIGHTNESS DIAL

NEW CODE BUTTON

RF “TRANSMIT” BUTTON

20 ON/OFF settings

Countdown timer

3 random functions

12/24 hour clock

15A, 1800W (resistive)

PROGRAMMABLE TIMER

PHOTOCELL TRANSMITTER LED INDICATOR

PHOTOCELL

PHOTOCELL TRANSMITTER

The LED INDICATOR of the transmitter will:

1Once you insert batteries into the transmitter, you will automatically enter

the user setting mode. This mode will last for two minutes in which you

can easily adjust the brightness or light sensitivity of the photocell sensor.

Alternately, you can press the RF button on the transmitter to enter the

user setting mode.

2In user setting mode, turn the BRIGHTNESS DIAL to adjust the light

sensitivity of the photocell sensor.

setting the clock

user setting mode

> TURN ON - when the photocell sensor detects that it is bright

Use the LED INDICATOR (on front of transmitter) as a reference, so that

you can fine tune the light sensitivity as desired.

> TURN OFF - when the photocell sensor detects that it is dark

PAGE 1 PAGE 2 PAGE 3

PAGE 9PAGE 8PAGE 7

hp://waterheatermer.org/UPM-mers -and-manuals.html

RANDOM FUNCTION TROUBLESHOOTING

PROGR AM

ON/OFF CD

SET

RANDOM

RESET

short/ randomlong

programmable random

PROGR AM

ON/OFF CD

SET

RANDOM

RESET

LCD display seems “frozen”. Buttons

won’t respond.

Timer loses programs when unplugged

Programmed ON/OFF times don’t

execute

Programmed ON/OFF times don’t

execute at specified times.

Transmitter stops turning receiver on

and off.

Press reset button to reset timer.

Replace batteries.

Ensure that the program disable feature is

not enabled.

Ensure that the random function is not

enabled.

Use the LEARN function to reprogram the

receiver or check the batteries.

problem solution

TECHNICAL SPECIFICATIONS

Programmable Timer RCT100

Ratings: 120V AC, 15A

Max Load: 1800W resistive; 600W tungsten

Photocell Transmitter RT601

Transmission Range: up to 40m in open area

Transmission Frequency: 433.92 M zH

PHOTOCELL TRANSMITTER

Repeat and for additional timers (available at your local retailer).

Press and hold ON/OFF and

together on timer while

simultaneously pressing the RF

button on the transmitter. (The

green LED indicator on the

transmitter will flash when RF is

pressed).

1Plug timer into wall socket

LEAR N

PR O G R AM

ON /O FF CD

SET

RAN DO M

RESET

The transmitter uses an intelligent code system to prevent interference

from other sources. But if you do experience such interference, you can

press the NEW CODE button to generate a new random house code.

However, after pressing the NEW CODE button, you will need to redo the

LEARNING procedure as described above.

The photocell transmitter can control multiple remote programmable timers.

learn function

PHOTOCELL TRANSMITTER

Transmits an “ON” command to the timer when photocell

senses a change from dark to bright. Transmits an “OFF”

command after the time delay as set by the Timing

Control Dial or when it turns from bright to dark.

3Once the learn function has been successfully executed,

the symbol will flash on the top right corner of the LCD

on the timer, every time the transmitter sends a signal or

when the RF button is pressed.

day mode / night mode

The photocell transmitter works by detecting the brightness level of its

surroundings and sends ON or OFF commands to the timer. The transmitter can

be set to trigger the timer to run for 30mins, 1, 2, 4, 6, 8, 10hrs or continuously,

and will automatically turn the timer OFF when the photocell senses a change

from dark to bright (in NIGHT mode) or bright to dark (in DAY mode).

Transmits an “ON” command to the timer when photocell

senses a change from bright to dark. Transmits an “OFF”

command after the time delay as set by the Timing

Control Dial or when it turns from dark to bright.

DAY MODE:

NIGHT MODE:

Turn TIMING CONTROL DIAL to select delay off time.

(30 minutes, 1, 2, 4, 6, 8, 10 hours, or continuous)

Slide MODE SWITCH: for DAY mode

and for NIGHT mode

down

INSTRUCTION TO THE USER

This equipment has been tested and found to comply with the limits for a

class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate

radio frequency energy and if not installed and used in accordance with the

instructions , may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

In order to maintain compliance with FCC regulations, shielded cables must

be used with this equipment. Operation with non-approved equipment or

unshielded cables is likely to result in interference to radio and TV reception.

The user is cautioned that changes and modifications made to the

equipment without the approval of manufacturer could void the user’s

authority to operate this equipment.

This device complies with Part 15 of the FCC Rules and RSS-210 of

Industry Canada. Operation is subject to the following two conditions:

FCC / RSS-210 COMPLIANCE

PHOTOCELL TRANSMITTER

For safety, set the photocell transmitter to trigger the

lights ON inside your doorway at dusk.

For convenience, set the photocell transmitter to start

your coffee maker at first light.

For security, set the transmitter to activate lights in

your home while you are away (day or night).

For energy savings, set the transmitter to trigger your

timer for controlled periods of time.

To maximize functionality, combine the time settings of

the photocell transmitter with those of the

programmable timer to achieve your desired ON/OFF

applications.

applications

1. this device may not cause harmful interference, and

2. this device must accept any interference received, including

interference that may cause undesired operation.

Flashing for short random

Flashing for long random

2Press RANDOM

Short random from

OR Long random from CD

RND

L RND

* Short random 1-2 hours, long random 2-3 hours

2Press RANDOM

Set program 20 to desired random time

Select program 20 with

Solid for programmable

RND

* Programmable random only works with program 20; 1-2 hours

Deactivate random function with RANDOM or ON/OFF

PAGE 4 PAGE 5 PAGE 6

PAGE 12PAGE 11PAGE 10

Produkt Specifikationer

Mærke:	UPM
Kategori:	Skifte
Model:	RT601

Har du brug for hjælp?

Hvis du har brug for hjælp til UPM RT601 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skifte UPM Manualer

15 September 2024

3 September 2024

11 August 2024

10 August 2024

6 August 2024

5 August 2024

5 August 2024

5 August 2024

2 August 2024

2 August 2024

Skifte Manualer

Nyeste Skifte Manualer

Lancom GS-2412 Manual

4 April 2025

Lancom GS-2412P Manual

4 April 2025

Lancom GS-2426 Manual

4 April 2025

Hager ARF970D Manual

3 April 2025

Hager ARF920D Manual

3 April 2025

Roline 14.01.3579 Manual

2 April 2025

Fantini Cosmi B12BN Manual

1 April 2025

Fantini Cosmi B12DN Manual

1 April 2025

Fantini Cosmi B12GN Manual

1 April 2025

Fantini Cosmi B12HN Manual

1 April 2025