Vaxcel P0232 Manual

Vaxcel Lys P0232

Læs gratis den danske manual til Vaxcel P0232 (3 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.0 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Vaxcel P0232, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THESE INSTRUCTIONS.

P0232

For Pendant Hardware Package (included):

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Turn off the power at fuse or circuit box

Mounting Strap (A) Fixture Mounting

Screw(D)

Wire Connector (C)

For Pendant Installation Steps

Lock

Nut (F)

Canopy Cover Assembly

Ball Nut (G)

Socket

Glass Shade

Glass Holder

Outlet Box

House Ground Wire

Fixture Mounting Screw (D)

Mounting Strap(A)

Lock Nut(F)

Mounting Screw(B)

1. Thread two fixture mounting screws

through the mounting strap, and then

secure with two lock nuts. Adjust the

length of the fixture mounting screws

if necessary.

2. Attach the mounting strap to the outlet

box by using two mounting screws.

3. Measure the desired length of the

cord (A) from the canopy cover

assembly to the top side of the fixture

and leave an additional 9" of cord (B)

above the canopy cover assembly

(include the canopy). Then cut off the

unnecessary cord. (See Figure.1)

4. Adjust strain relief at 9" position from

the top of the cord.

5. Mark the 3" of cord (C) from the top of

the cord (B). Use a knife to peel off the

insulation of the cord (C) carefully to

expose the 3 wires on the inside.

(See Figure 1)

CAUTION: Too deep cutting may

damage the insulation layer of the three

wires inside.

6. Peel off the 3 wires from the top about 3/8" long(D) to expose

the copper for wiring.

7. Connecting the wires with wire connectors as follows:

171110

Green Grounding

Screw (E)

Mounting Screw (B)

Set Screw

Cord

Vintage Bulb Max.60W

(not included)

Strain Relief

D(3/8")

C(3")

B(9")

Figure. 1

Wire Connector (C)

Green Ground Screw (E)

Produkt Specifikationer

Mærke:	Vaxcel
Kategori:	Lys
Model:	P0232

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel P0232 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lys Vaxcel Manualer

Vaxcel P0236 Manual

18 December 2025

Vaxcel W0443 Manual

18 December 2025

Vaxcel P0250 Manual

18 December 2025

Vaxcel Sheffield P0368 Manual

18 December 2025

Vaxcel P0154 Manual

18 December 2025

Vaxcel Stevens C0290 Manual

18 December 2025

Vaxcel Monrovia C0272 Manual

18 December 2025

Vaxcel Alto C0219 Manual

18 December 2025

Vaxcel Rhine C0302 Manual

18 December 2025

Vaxcel Fulton W0489 Manual

18 December 2025

Lys Manualer

Nyeste Lys Manualer

NightStick XPR-5590RCX Manual

18 December 2025

NightStick NSR-9514B Manual

18 December 2025

NightStick NSP-4612B Manual

18 December 2025

NightStick NSP-2420RX Manual

18 December 2025

NightStick Remington SFL-13WL Manual

18 December 2025

NightStick TCM-10-T Manual

18 December 2025

NightStick TAC-510XLDC Manual

18 December 2025

NightStick TAC-460XL-K01 Manual

18 December 2025

NightStick Remington SFL-13GL Manual

18 December 2025

V-TAC VT-7748 Manual

17 December 2025