Viking E-1600-SS-IP Manual
Viking
Samtaleanlæg
E-1600-SS-IP
Læs nedenfor 📖 manual på dansk for Viking E-1600-SS-IP (12 sider) i kategorien Samtaleanlæg. Denne guide var nyttig for 4 personer og blev bedømt med 4.6 stjerner i gennemsnit af 2.5 brugere
Side 1/12
Features
Applications
Specifications
www.VikingElectronics.com
Information: 715-386-8861
ADA* Compliant Emergency Phones with
Built-In Digital Voice Announcer
• Optional cellular connectivity using compatible 3rd party Cell to POTS
converters, See Page 7
• Automatic Noise Canceling (ANC) feature for clear audio in noisy environments
• ASME A17.1 code compliant when used with the Model LV-1K Line Verification Panel
• Meets ADA requirements for Emergency Phones:
- Automatically lights the “Call Connected” LED
- Transmits a unique location I.D. code or voice announcement
- Grade 2 Braille label for the visually impaired
• Non-volatile digital voice announcer with 16 seconds of voice memory
• Advanced call progress detection
• Handsfree operation
• Phone line powered
• Non-volatile memory (no batteries required)
• Marine grade 316 stainless steel prevents corrosion on stainless models
• Dials up to 5 emergency numbers
• E-1600-20A and E-1600-52A dial up to 3 non-emergency “INFO” numbers
• Cycles through backup phone numbers on busy or no-answer
• Optional Enhanced Weather Protection (EWP), EWP products are designed to meet
IP66 Ingress Protection Rating, see DOD 859
• Hangs up on CPC, silence, busy signal, dial tone, time-out or touch tone command
• Programmable to auto-answer on incoming calls
• Remotely programmable
• Extended temperature range (-30°F to 170°F)
• 16 different chassis or board only available
• Available in 42” tall tower phone model E-1600A-BLT-EWP (DOD 217)
• Central Station Monitoring capability (dials 2 numbers)
• Optional PB-100 Polling System available
• Optional BLK-4-EWP strobe light kit available
• Optional LC-6 Six Port Concentrator available
• Optional LV-1K Line Verification Panel available
• Optional PB-1 Panic Button Kit
• Also available with VoIP interface, see DOD 255 for more information
Power: Telephone line powered.
Minimum 24V DC talk battery voltage, with
a minimum loop current of 20mA loop. Loop current may be boosted on low
current lines with a Viking model TBB-1B Talk Battery Booster (DOD 632).
Dimensions: See Installation and Specifications
Operating Temperature: -30° F to 170° F (-34° C to 77° C)
Humidity - Standard Products: 5% to 95% non-condensing
Humidity - EWP Products: Up to 100%
CAUTION - When installing on an analog extension of a phone system:
Some phone systems do not conform to analog telecom standards and might
not be compatible with the 1600A Series emergency phones. For a detailed
description of the telephone line specifications required for any of the 1600A
Series phones, see DOD 869.
* Americans with Disabilities Act of 1992 contains federal regulations
regarding elevator telephones (Public Law 101-336).
• Elevators
• Parking ramps/lots
• Emergency pool phones
• ATM machines
• Area of refuge locations
• Lobbies
• Silent holdup alarm dialer using optional Panic Button Kit
• Entryways
• Campus emergency stations
• Roadside emergency stations
• Stadiums
• Convention centers
E-1600-45A
K-1600-EHFA
E-1600A
E-1600-02A
E-1600-03B
E-1600-20A E-1600-55A
E-1600-30A
E-1600-65A E-1600-60A
The 1600A Series ADA Compliant Emergency Phones are designed to provide quick
and reliable handsfree communication for any standard analog telephone line or analog
phone system station port. All 1600A Series phones meet ADA requirements for
elevator/ emergency telephones, and can be programmed from any touch tone phone.
The phones can dial up to 5 programmable emergency numbers, as well as 2 central
station numbers. In addition, the E-1600-20A and E-1600-52A feature a second "INFO"
button that will dial up to 3 non-emergency numbers.
The 1600A Series phones can be programmed to automatically deliver a digital
announcement to identify the location of the emergency call. Alternatively, a DTMF touch
tone code may also be delivered. A “Call Connected” LED can be initiated manually or
automatically. All programming parameters, including phone numbers and location
numbers, are stored in non-volatile memory. All units are phone line powered, requiring
no batteries or external power and are compatible with common Central Station
Monitoring equipment.
For outdoor installations where the unit is exposed to precipitation or condensation, select
1600A Series phones are available with Enhanced Weather Protection (EWP). EWP
products are designed to meet IP66 standards and may feature foam rubber gaskets,
sealed connections, gel-filled butt connectors, as well as potted circuit boards with
internally sealed, field-adjustable trim pots and DIP switches for easy onsite
programming. For more information on EWP, see DOD 859.
E-1600-32A
PRODUCT
MANUAL
Designed, Manufactured and Supported in the USA
1600A Series
ADA Compliant
Emergency Phone
January 6, 2025
SECURITY & COMMUNICATION
VIKING
E-1600-SSA E-1600-RDA E-1600-YLA E-1600-BLA E-1600-BLPA E-1600-BKA
Wiring
C.O. Line
Analog
PABX/KSU Station
Cellular
to POTS Converter
Rear View of a 1600A Series Phone
****
*****
* Drip Loop
Red
Green
Ring
Terminal
(included)
** Earth
Ground
(optional)
-OR- -OR-
*** Gel-Filled Butt
Connectors
**** Note: When installing a line powered phone on a low voltage and/or low loop current phone
system extension, a TBB-1B Talk Battery Booster may be required, see DOD 632 for more info.
* Note: When wires are routed from above, a “drip loop” is
recommended to keep water away from the circuit board.
*** Note: The gel-filled (water-tight) butt connectors are designed for insulation displacement on
19-26 gauge wire with a maximum insulation of 0.082 inches. Cut off bare wire ends prior to
terminating.
Dimensions: 5.25” x 4.0” x 2.0” (133 mm x 102 mm x 51 mm)
Shipping Weight: 2.5 lbs (1.13 kg)
Material: 16 gauge steel
Finish: E-1600A - Red powder paint
E-1600-40A - Red powder paint, no “EMERGENCY PHONE” verbiage
E-1600-45A - Yellow powder paint
E-1600-60A - Blue powder paint with “POLICE” verbiage
E-1600-65A - Blue powder paint
Connections: Gel-filled butt connectors
Mounting: Surface mount to walls, posts, single gang boxes or 4” x 4” electrical junction boxes,
or recess mount in elevator phone boxes. Attach the mounting plate in desired location and
connect the wires. Then, secure the phone to the mounting plate with the provided set screw.
2.00
4.00
5.25
0.703
diameter
4.96
3.40
3.40
1.70
1.70
3.30
3.82
2.00
1.15
EMERGENCY
PHONE
CALL
CONNECTED
PUSH FOR
VIKING©
HELP
Grade 2
Braille Label
Red Call
Connected
LED
Push to Call
Button
POLICE
Condensation
Drain Hole
SIDE
VIEW
BOTTOM
VIEW
FRONT VIEW
MOUNTING PLATE
on model E-1600-60A only
3/4" knockout
Model E-1600-45A has
"EMERGENCY" vertically
down the side. Model
E-1600-60A has "POLICE"
vertically down the side.
0.15 x 0.31
Wire Exit Notch
(4) .20 dia.
mounting
holes
(2) .20 x .40
slots for single
gang box
Model E-1600A
shown with
optional VE-GNP
pedestal and
E-1600A-MK-GNP
mounting kit.
Set
Screw
Optional Enhanced Weather Protection (EWP) Available: EWP products
are designed to meet IP66 standards and may feature foam rubber gaskets,
sealed connections, gel-filled butt connectors, as well as potted circuit boards
with internally sealed, field-adjustable trim pots and DIP switches for easy
onsite programming. For more info on EWP, see DOD 859.
Note: For greater weather resistance, apply a bead of clear silicon caulking
around the top edge and sides of the chassis.
Optional Gooseneck Pedestal Mounting Kit: The E-1600A-MK-GNP
Mounting Kit (DOD 227) allows you to mount the E-1600A, E-1600-40A,
E-1600-45A, E-1600-60A or E-1600-65A to a Viking VE-GNP Gooseneck
Pedestal (DOD 424).
Installation and Specifications
The following sections show specifications and installation instructions for the different chassis in the 1600A Series.
IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges from both the AC
outlet and the telephone line. It is recommended that a surge protector be installed to protect against such surges.
E-1600A / E-1600-40A / E-1600-45A / E-1600-60A / E-1600-65A
2
IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges from both the AC
outlet and the telephone line. It is recommended that a surge protector be installed to protect against such surges.
** Note: To increase surge protection, loosen the PCB mounting
screw labeled (as shown) and fasten a wire with ring terminal
(included) from the mounting screw to Earth Ground (grounding rod,
water pipe, etc.)
***** Note: See Page 7 for compatible Cellular to POTS converters.
Produkt Specifikationer
| Mærke: | Viking |
| Kategori: | Samtaleanlæg |
| Model: | E-1600-SS-IP |
Har du brug for hjælp?
Hvis du har brug for hjælp til Viking E-1600-SS-IP stil et spørgsmål nedenfor, og andre brugere vil svare dig
Samtaleanlæg Viking Manualer
4 Juni 2025
4 Juni 2025
4 Juni 2025
3 Juni 2025
3 Juni 2025
3 Juni 2025
1 Oktober 2024
25 September 2024
25 September 2024
25 September 2024
Samtaleanlæg Manualer
- Samtaleanlæg On-Q
- Samtaleanlæg Neview
- Samtaleanlæg Russound
- Samtaleanlæg Mobotix
- Samtaleanlæg Extel
- Samtaleanlæg Chacon
- Samtaleanlæg Sygonix
- Samtaleanlæg Aiphone
- Samtaleanlæg ORNO
- Samtaleanlæg EtiamPro
- Samtaleanlæg Interphone-Cellularline
- Samtaleanlæg Eura
- Samtaleanlæg Nedis
- Samtaleanlæg Bticino
- Samtaleanlæg Abus
Nyeste Samtaleanlæg Manualer
27 Marts 2025
29 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
15 Januar 2025
14 Januar 2025
30 December 2025