Viking E-1600-45A-EWP Manual

Viking Samtaleanlæg E-1600-45A-EWP

Læs gratis den danske manual til Viking E-1600-45A-EWP (12 sider) i kategorien Samtaleanlæg. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Viking E-1600-45A-EWP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/12

Features

Applications

Specifications

www.VikingElectronics.com

Information: 715-386-8861

ADA* Compliant Emergency Phones with

Built-In Digital Voice Announcer

• Automatic Noise Canceling (ANC) feature for clear audio in noisy environments

• Meets the latest ASME A17.1 code when used with the optional LV-1K Line Verification

Panel, see DOD 246

• Meets ADA requirements for Emergency Phones:

- Automatically lights the “Call Connected” LED

- Transmits a unique location I.D. code or voice announcement

- Grade 2 Braille label for the visually impaired

• Non-volatile digital voice announcer with 16 seconds of voice memory

• Advanced call progress detection

• Handsfree operation

• Phone line powered

• Non-volatile memory (no batteries required)

• Marine grade 316 stainless steel prevents corrosion on stainless models

• Dials up to 5 emergency numbers

• E-1600-20A and E-1600-52A dial up to 3 non-emergency “INFO” numbers

• Cycles through backup phone numbers on busy or no-answer

• Optional Enhanced Weather Protection (EWP), EWP products are designed to meet

IP66 Ingress Protection Rating, see DOD 859

• Hangs up on CPC, silence, busy signal, dial tone, time-out or touch tone command

• Programmable to auto-answer on incoming calls

• Remotely programmable

• Extended temperature range (-30°F to 170°F)

• 16 different chassis or board only available

• Available in 42” tall tower phone model E-1600A-BLT-EWP (DOD 217)

• Central Station Monitoring capability (dials 2 numbers)

• Optional PB-100 Polling System available (DOD 232)

• Optional BLK-4-EWP strobe light kit available (DOD 654)

• Optional LC-6 Six Port Concentrator available (DOD 245)

• Optional LV-1K Line Verification Panel available (DOD 246)

• Optional E-1600A-MK-GNP Pedestal Mounting Kit (DOD 227)

• Optional PB-1 Panic Button Kit (DOD 233)

• Also available with VoIP interface, see DOD 255 for more information

Power: Telephone line powered.

Minimum 24V DC talk battery voltage, with

a minimum loop current of 20mA loop. Loop current may be boosted on low

current lines with a Viking model TBB-1B Talk Battery Booster (DOD 632).

Dimensions: See Installation and Specifications

Operating Temperature: -30° F to 170° F (-34° C to 77° C)

Humidity - Standard Products: 5% to 95% non-condensing

Humidity - EWP Products: Up to 100%

CAUTION - When installing on an analog extension of a phone system:

Some phone systems do not conform to analog telecom standards and might

not be compatible with the 1600A Series emergency phones. For a detailed

description of the telephone line specifications required for any of the 1600A

Series phones, see DOD 869.

* Americans with Disabilities Act of 1992 contains federal regulations

regarding elevator telephones (Public Law 101-336).

• Elevators

• Parking ramps/lots

• Emergency pool phones

• ATM machines

• Area of refuge locations

• Lobbies

• Silent holdup alarm dialer using optional Panic Button Kit

• Entryways

• Campus emergency stations

• Roadside emergency stations

• Stadiums

• Convention centers

E-1600-45A

K-1600-EHFA

E-1600A

E-1600-02A

E-1600-03B

E-1600-20A E-1600-55A

E-1600-30A

E-1600-65A E-1600-60A

The 1600A Series ADA Compliant Emergency Phones are designed to provide quick

and reliable handsfree communication for any standard analog telephone line or analog

phone system station port. All 1600A Series phones meet ADA requirements for

elevator/ emergency telephones, and can be programmed from any touch tone phone.

The phones can dial up to 5 programmable emergency numbers, as well as 2 central

station numbers. In addition, the E-1600-20A and E-1600-52A feature a second "INFO"

button that will dial up to 3 non-emergency numbers.

The 1600A Series phones can be programmed to automatically deliver a digital

announcement to identify the location of the emergency call. Alternatively, a DTMF touch

tone code may also be delivered. A “Call Connected” LED can be initiated manually or

automatically. All programming parameters, including phone numbers and location

numbers, are stored in non-volatile memory. All units are phone line powered, requiring

no batteries or external power and are compatible with common Central Station

Monitoring equipment.

For outdoor installations where the unit is exposed to precipitation or condensation, select

1600A Series phones are available with Enhanced Weather Protection (EWP). EWP

products are designed to meet IP66 standards and may feature foam rubber gaskets,

sealed connections, gel-filled butt connectors, as well as potted circuit boards with

internally sealed, field-adjustable trim pots and DIP switches for easy onsite

programming. For more information on EWP, see DOD 859.

E-1600-32A

PRODUCT

MANUAL

Designed, Manufactured and Supported in the USA

1600A Series

ADA Compliant

Emergency Phone

October 2, 2023

SECURITY & COMMUNICATION

VIKING

E-1600-SSA E-1600-RDA E-1600-YLA E-1600-BLA E-1600-BLPA E-1600-BKA

Wiring

-OR-

C.O. Line

Analog

PABX/KSU Station

Rear View of a 1600A Series Phone

****

* Drip Loop

*** Gel-Filled Butt

Connectors

Red

Green

Ring

Terminal

(included)

** Earth

Ground

(optional)

**** Note: When installing a line powered phone on a low voltage and/or low loop current phone system

extension, a TBB-1B Talk Battery Booster may be required, see DOD 632 for more info.

* Note: When wires are routed from above, a “drip loop” is

recommended to keep water away from the circuit board.

*** Note: The gel-filled (water-tight) butt connectors are designed for insulation displacement on 19-26

gauge wire with a maximum insulation of 0.082 inches. Cut off bare wire ends prior to terminating.

Dimensions: 5.25” x 4.0” x 2.0” (133 mm x 102 mm x 51 mm)

Shipping Weight: 2.5 lbs (1.13 kg)

Material: 0.062” thick (16 gauge) steel

Finish: E-1600A - Red powder paint

E-1600-40A - Red powder paint, no “EMERGENCY PHONE” verbiage

E-1600-45A - Yellow powder paint

E-1600-60A - Blue powder paint with “POLICE” verbiage

E-1600-65A - Blue powder paint

Connections: Gel-filled butt connectors

Mounting: Surface mount to walls, posts, single gang boxes or 4” x 4” electrical junction boxes,

or recess mount in elevator phone boxes. Attach the mounting plate in desired location and

connect the wires. Then, secure the phone to the mounting plate with the provided set screw.

2.00

4.00

5.25

0.703

diameter

4.96

3.40

1.70

3.30

3.82

2.00

1.15

EMERGENCY

PHONE

CALL

CONNECTED

PUSH FOR

VIKING©

HELP

Grade 2

Braille Label

Red Call

Connected

LED

Push to Call

Button

POLICE

Condensation

Drain Hole

SIDE

VIEW

BOTTOM

VIEW

FRONT VIEW

MOUNTING PLATE

on model E-1600-60A only

3/4" knockout

Model E-1600-45A has

"EMERGENCY" vertically

down the side. Model

E-1600-60A has "POLICE"

vertically down the side.

0.15 x 0.31

Wire Exit Notch

(4) .20 dia.

mounting

holes

(2) .20 x .40

slots for single

gang box

Model E-1600A

shown with

optional VE-GNP

pedestal and

E-1600A-MK-GNP

mounting kit.

Set

Screw

Optional Enhanced Weather Protection (EWP) Available: EWP products

are designed to meet IP66 standards and may feature foam rubber gaskets,

sealed connections, gel-filled butt connectors, as well as potted circuit boards

with internally sealed, field-adjustable trim pots and DIP switches for easy

onsite programming. For more info on EWP, see DOD 859.

Note: For greater weather resistance, apply a bead of clear silicon caulking

around the top edge and sides of the chassis.

Optional Gooseneck Pedestal Mounting Kit: The E-1600A-MK-GNP

Mounting Kit (DOD 227) allows you to mount the E-1600A, E-1600-40A,

E-1600-45A, E-1600-60A or E-1600-65A to a Viking VE-GNP Gooseneck

Pedestal (DOD 424).

Installation and Specifications

The following sections show specifications and installation instructions for the different chassis in the 1600A Series.

IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges from both the AC

outlet and the telephone line. It is recommended that a surge protector be installed to protect against such surges.

E-1600A / E-1600-40A / E-1600-45A / E-1600-60A / E-1600-65A

IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges from both the AC

outlet and the telephone line. It is recommended that a surge protector be installed to protect against such surges.

** Note: To increase surge protection, loosen the PCB

mounting screw labeled (as shown) and fasten a

wire with ring terminal (included) from the mounting

screw to Earth Ground (grounding rod, water pipe, etc.)

Produkt Specifikationer

Mærke:	Viking
Kategori:	Samtaleanlæg
Model:	E-1600-45A-EWP
Kode for international beskyttelse (IP):	IP66
Bredde:	102 mm
Dybde:	51 mm
Højde:	133 mm
Vægt:	1130 g
Produktfarve:	Gul
Driftstemperatur (T-T):	-26 - 54 °C
Husmateriale:	Stål
Forbindelsesteknologi:	Ledningsført
Certificering:	EWP\nIP66\nFCC Part 15\nADA
Placering:	Væg
Nem at installere:	Ja
Antal knapper:	1