Vollrath BCO-2000 Manual

Vollrath Dåseåbner BCO-2000

Læs gratis den danske manual til Vollrath BCO-2000 (8 sider) i kategorien Dåseåbner. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Vollrath BCO-2000, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

ENGLISH

Item No. 2350084-1 en Rev 11/10

ENGLISH

Operator’s Manual

EaziClean

Can Opener

Premium

™

Can Opener

Thank you for purchasing this Vollrath Food Processing Equipment. Before operating the equipment, read and familiarize yourself with the

following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging.

Use this packaging to ship the equipment if repairs are needed.

Product

Number

Description

BCO-2000 EaziClean

16” Bar Length, 1” Gear

BCO-3000 EaziClean

25” Bar Length, 1” Gear

BCO-5000 EaziClean

16” Bar Length, 1-1/2” Gear

BCO-6000 EaziClean

25” Bar Length, 1-1/2” Gear

BCO-7000 EaziClean

25” Bar Length, 1-1/2” Gear

BCO-1 Preimum™ 16” Bar Length, 1” Gear

BCO-1

BCO-2000

BCO-3000

BCO-7000

BCO-5000

BCO-6000

Manual Food Processing equiPMent

OperatOr’s Manual

Safety PrecautionS

To ensure safe operation, read the following statements and

understand their meaning. This manual contains safety precautions

which are explained below. Please read carefully.

WARNING

Warning is used to indicate the presence of a hazard that can cause

severe personal injury, death, or substantial property damage if the

warning is ignored.

CAUTION

Caution is used to indicate the presence of a hazard that will or can

cause minor personal injury or property damage if the caution is

ignored.

NOTE

Note is used to notify people of installation, operation, or

maintenance information that is important but not hazard-related.

For Your Safety!

These precautions should be followed at all times. Failure to follow

these precautions could result in injury to yourself and others or

damage the equipment.

To reduce risk of injury or damage to the unit:

 Check machine before each use to insure the equipment is clean.

 Check for broken, nicked or dull blades and if found, replace blade.

function and PurPoSe

Easily pierce and safely open cans.

BaSe inStallation

Installing the can opener base:

1. Choose a convenient location with a rm work surface (C) and install the

base (A) securing with the hardware (B) provided. See Figure 1.

On thin gauge work surface we suggest you t a spacer plate

underneath. This will prevent the exing of the work surface and possible

spillage of can contents during opening.

Figure 1. Base to Work Surface Installation.

oPeration

Prior to rst use, it is important to clean the unit. Wash the unit with warm

soapy water and rinse thoroughly to remove the thin protective oil lm.

2. Place the can opener bar (A) into the base (B) as shown in Figure 2.

Figure 2. Bar into Base Installation.

WARNING

Sharp Blade Hazard.

Blades are sharp and can cause cuts.

To avoid injury from sharp blades, handle with caution. Only trained

personal should operate equipment or perform maintenance.

3. Move the handle (A) to the UP position as shown. Place the can (B)

against the bar (C). Using a swift downwards movement, punch the

blade (D) into the can lid. See Figure 3.

Figure 3. Punching the Blade into the Can.

Produkt Specifikationer

Mærke:	Vollrath
Kategori:	Dåseåbner
Model:	BCO-2000

Har du brug for hjælp?

Hvis du har brug for hjælp til Vollrath BCO-2000 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Dåseåbner Vollrath Manualer

Vollrath BCO-7000 Manual

20 September 2025

Vollrath BCO-2000 Manual

20 September 2025

Vollrath BCO-5000 Manual

27 August 2025

Vollrath BCO-1 Manual

27 August 2025

Vollrath BCO-6000 Manual

25 August 2025

Vollrath BCO-3000 Manual

25 August 2025

Dåseåbner Manualer

Nyeste Dåseåbner Manualer

Chefman RJ36 Manual

24 September 2025

GARDE 181COM2NB Manual

17 September 2025

GARDE 181COM2BST Manual

17 September 2025

Garde XL 181CONSFNB Manual

27 August 2025

Garde XL 181CONSFBST Manual

25 August 2025

25 August 2025

25 August 2025

25 August 2025

25 August 2025

Garde XL 181CONSFBSS Manual

25 August 2025