Vollrath BCO-3000 Manual


Læs gratis den danske manual til Vollrath BCO-3000 (8 sider) i kategorien Dåseåbner. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Vollrath BCO-3000, eller vil du spørge andre brugere om produktet?

Side 1/8
ENGLISH
Item No. 2350084-1 en Rev 11/10
ENGLISH
Operators Manual
EaziClean
®
Can Opener
Premium
Can Opener
following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and packaging.
Use this packaging to ship the equipment if repairs are needed.
Product
Number
Description
BCO-2000 EaziClean
®
16” Bar Length, 1” Gear
BCO-3000 EaziClean
®
25” Bar Length, 1” Gear
BCO-5000 EaziClean
®
16” Bar Length, 1-1/2” Gear
BCO-6000 EaziClean
®
25” Bar Length, 1-1/2” Gear
BCO-7000 EaziClean
®
25” Bar Length, 1-1/2” Gear
BCO-1 Preimum 16” Bar Length, 1” Gear
BCO-1
BCO-2000
BCO-3000
BCO-7000
BCO-5000
BCO-6000
M F P eanual ood rocessing quiPMent
OperatOr s anual M
2
S Pafety recautionS
To ensure safe operation, read the following statements and
understand their meaning. This manual contains safety precautions
which are explained below. Please read carefully.
WARNING
Warning is used to indicate the presence of a hazard that cause can
severe personal injury, death, or substantial property damage if the
warning is ignored.
CAUTION
Caution is used to indicate the presence of a hazard that or will can
cause personal injury or property damage if the caution is minor
ignored.
NOTE
Note is used to notify people of installation, operation, or
maintenance information that is important but not hazard-related.
For Your Safety!
These precautions should be followed at all times. Failure to follow
these precautions could result in injury to yourself and others or
damage the equipment.
To reduce risk of injury or damage to the unit:
Check machine before each use to insure the equipment is clean.
Check for broken, nicked or dull blades and if found, replace blade.
f Punction and urPoSe
Easily pierce and safely open cans.
B iaSe nStallation
Installing the can opener base:
1. Choose a convenient location with a rm work surface (C) and install the
base (A) securing with the hardware (B) provided. See Figure 1.
On thin gauge work surface we suggest you t a spacer plate
underneath. This will prevent the exing of the work surface and possible
spillage of can contents during opening.
C
B
A
B
B
Figure 1. Base to Work Surface Installation.
oPeration
Prior to rst use, it is important to clean the unit. Wash the unit with warm
soapy water and rinse thoroughly to remove the thin protective oil lm.
2. Place the can opener bar (A) into the base (B) as shown in Figure 2.
A
B
Figure 2. Bar into Base Installation.
WARNING
Sharp Blade Hazard.
Blades are sharp and can cause cuts.
To avoid injury from sharp blades, handle with caution. Only trained
personal should operate equipment or perform maintenance.
3. Move the handle (A) to the UP position as shown. Place the can (B)
against the bar (C). Using a swift downwards movement, punch the
blade (D) into the can lid. See Figure 3.
C
B
A
D
Figure 3. Punching the Blade into the Can.


Produkt Specifikationer

Mærke: Vollrath
Kategori: Dåseåbner
Model: BCO-3000

Har du brug for hjælp?

Hvis du har brug for hjælp til Vollrath BCO-3000 stil et spørgsmål nedenfor, og andre brugere vil svare dig