WyreStorm EXP-SW-0401-H2 Manual

WyreStorm Router EXP-SW-0401-H2

Læs gratis den danske manual til WyreStorm EXP-SW-0401-H2 (2 sider) i kategorien Router. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 10 anmeldelser. Har du et spørgsmål om WyreStorm EXP-SW-0401-H2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

EXP-SW-0401-H2 Quickstart Guide | 210810

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

support@wyrestorm.com

1 of 2

WyreStorm Essentials 4K HDR 4x1 HDMI Switcher with

Auto-Switching, HDCP 2.2 & Remote

EXP-SW-0401-H2

IMPORTANT! Installation Requirements

• Visit the product page to download the latest rmware, document version,

additional documentation, and conguration tools.

• Read through the section for important guidelines

Wiring and Connections

before creating or choosing premade cables.

In The Box

1x EXP-SW-0401-H2 Switcher

1x 12V DC Power Supply (US/UK/EU/AU)

2x Mounting Brackets

1x IR Remote Control

1 x IR Receiver Cable

Basic Wiring Diagram

WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the installation

process.

Wiring and Connections

WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the switcher. Read through this section in its

entirety before running or terminating the wires to ensure proper operation and to avoid damaging equipment.

IMPORTANT! HDMI Wiring Guidelines

• The use of patch panels, wall plates, cable extenders, kinks in cables, and electrical or environmental interference will have an adverse effect on HDMI

transmission limiting performance. Steps should be taken to minimize or remove these factors completely during installation for best results.

• WyreStorm recommends using high quality HDMI cables such as WyreStorm Essentials to ensure the highest content performance available.

Installation and Operation

1. Connect HDMI sources to the HDMI IN ports using a good quality HDMI cable.

2. Connect an HDMI display devices to the HDMI OUT port of the switcher.

Note: The switcher is powered via mains power supply to the unit. WyreStorm recommend using only power adapter supplied.

3. Turn the power on ensuring LED power indicators are fully lit on the front of the switcher. If not, check power cable is rmly connected.

Quickstart Guide

4K Blu-ray Player

Display Device

Streaming Device

Remote

Control

4K Satellite Box

Games Console

KEY

HDMI

Control

Power

Troubleshooting

No or Poor Quality Picture (snow or noisy image)

• Verify that power is being supplied to all devices in the system and that they are powered on.

• Verify that all HDMI connections are not loose and are functioning properly.

• If transmitting 3D or 4K, verify that the HDMI cables used are 4K rated.

Troubleshooting Tips:

• WyreStorm recommends using a cable tester or connecting the cable to other devices to verify functionality.

Specications

Note: WyreStorm reserves the right to change product specication, appearance or dimensions of this product at any time without prior notice.

Audio and Video

Inputs 4x HDMI In: 19-pin type A

Outputs 1x HDMI Out: 19-pin type A

Video Encoding HDMI | TMDS

Encoding Data Rate NA

End to End Latency NA

Audio Formats 2ch PCM | Multichannel: LPCM and up to DTS-X and Dolby Atmos

Video Resolutions (Max)

Resolution HDMI

1920x1080p @60Hz 16bit

3840x2160p @60Hz 8bit 4:4:4 HDR

4096x2160p @60Hz 12bit 4:2:2 Dolby Vision/HDR10

7m/23ft

3m/12ft

Supported Standards DCI | RGB | HDR | HDR10 | Dolby Vision | HLG | ALLM | VRR | BT.2020 | BT.2100

Maximum Pixel Clock 600MHz

Color Depth 12bit

Communication and Control

HDMI HDCP 2.2 | EDID | DVI-D supported with adapter (not included)

IR 1x IR Ext. Port

Push Button Front Panel Push Button

Power

Power Supply 12V DC 1A

Max Power Consumption 3.2W

Environmental

Operating Temperature 0 to + 45°C (32 to + 113 °F), 10% to 90%, non-condensing

Storage Temperature -20 to +70°C (-4 to + 158 °F), 10% to 90%, non-condensing

Maximum BTU 10.92 BTU/hr

Dimensions and Weight

Rack Units/Wall Box <1U

Height 16mm/0.62in

Width 175mm/6.9in

Depth 66.2mm/2.6in

Weight 0.25kg/0.55lbs

Regulatory

Safety and Emission CE | FCC | RoHS | EAC | RCM

EXP-SW-0401-H2 Quickstart Guide | 210810

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

support@wyrestorm.com

2 of 2

Produkt Specifikationer

Mærke:	WyreStorm
Kategori:	Router
Model:	EXP-SW-0401-H2
Bredde:	175 mm
Dybde:	66.2 mm
Højde:	16 mm
Vægt:	250 g
Antal pr. pakke:	1 stk
Opbevaringstemperatur (T-T):	-20 - 70 °C
Relativ luftfugtighed ved drift (H-H):	10 - 90 %
Relativ luftfugtighed ved opbevaring (H-H):	10 - 90 %
Antal HDMI-porte:	5
HDCP:	Ja
Driftstemperatur (T-T):	0 - 45 °C
Maksimal opløsning:	4096 x 2160 pixel
Udgangsspænding for vekselstrømsadapter:	12 V
Certificering:	FCC, EAC, RCM
Strømforbrug (maks.):	3.2 W
Harmoniseret systemkode (HS):	85176990
Bæredygtighedscertifikater:	CE, RoHS
Farvedybde:	12 Bit
Maksimal opdateringshastighed:	60 Hz
Maksimal driftstilstand:	7 m
Vekselstrømsadapterens udgangsstrøm:	1 A
HSMI-indgang:	4
Antal HDMI-udgange:	1
Stativ-montering:	Ja
Varmeafgivelse:	10.92 BUT/t
USB porttype:	USB Type-A
HDCP-version:	2.2
Video porttype:	HDMI
Rackkapacitet:	1U
Udvidet display identifikationsdata (EDID):	Ja
Dolby-teknologier:	Dolby Vision