WyreStorm MX-0808-H2A Manual

WyreStorm Router MX-0808-H2A

Læs gratis den danske manual til WyreStorm MX-0808-H2A (4 sider) i kategorien Router. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 8 anmeldelser. Har du et spørgsmål om WyreStorm MX-0808-H2A, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

MX-0808-H2A-MK2 Quickstart Guide | 210331

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

support@wyrestorm.com

1 of 4

4K HDR 8x8 Pure HDMI Matrix with Scaling Outputs,

Audio De-embed & ARC

MX-0808-H2A-MK2 Quickstart Guide

WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the

installation process.

Basic Wiring Diagram

IMPORTANT! Installation Requirements

• Visit the product page to download the latest rmware, document version,

additional documentation, and conguration tools.

• Read through the section for important wiring

Wiring and Connections

guidelines before creating or choosing premade cables.

• While this product supports CEC, WyreStorm cannot guarantee

compatibility with all forms of CEC communication.

In the Box

1x MX-0808-H2A-MK2 Matrix

1x AC Power Cord (US/UK/EU/AU)

8x 3.5mm 5-Pin Terminal Block

1x 3.5mm 3-Pin Terminal Block

1x IR Remote (CR2025 Battery not Included)

2x Matrix Mounting Brackets with screws

1x Quickstart Guide (this document)

HDR Source HDR Source

1080p Display

HDMI

HDR Display

Ampliﬁer

Digtial Audio

KEY

Passive HDMI

Active HDMI

Ethernet

Control

Active HDMI (CAB-HAOC-xx)

Runs of 10m/33ft or more

Power

Digital Audio

Built-in Web UI for Configuration and Control

Requires connection to LAN (Local Area Network)

Audio Return

Channel

MX-0808-H2A-MK2 Quickstart Guide | 210331

UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)

support@wyrestorm.com

2 of 4

Wiring and Connections

WyreStorm recommends that all wiring for the installation is run and terminated prior to making connections to the switcher. Read through this section in its

entirety before running or terminating the wires to ensure proper operation and to avoid damaging equipment.

IMPORTANT! Wiring Guidelines

• The use of patch panels, wall plates, cable extenders, kinks in cables, and

electrical or environmental interference will have an adverse effect on

signal transmission which may limit performance. Steps should be taken

to minimize or remove these factors completely during installation for best

results.

• WyreStorm recommends using pre-terminated HDMI due to the complexity

of these connector types. Using pre-terminated cables will ensure that

these connections are accurate and will not interfere with the performance

of the product.

RS-232 Wiring

Most control systems and computers are DTE where pin 2 is RX, this can vary from device to device. Refer to the documentation for the connected device for pin

functionally to ensure that the correct connections can be made.

3rd Party Device