Zalman RESERATOR 1 Manual


Læs gratis den danske manual til Zalman RESERATOR 1 (22 sider) i kategorien Computer køling komponent. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Zalman RESERATOR 1, eller vil du spørge andre brugere om produktet?

Side 1/22
RESERATOR 1
www.zalman.co.kr www.zalmanusa.com
English Edition
Visit our website (www.zalman.co.kr) and watch the RESERATOR 1 installation
video to facilitate the installation process.
Please read this manual thoroughly before installation.
The specifications of this product and its components may change without prior notice to improve the performance thereof.
RESERATOR 1
www.zalman.co.kr www.zalmanusa.com
2
1.Make sure that the power sources output voltage and frequency are compatible with
the power input requirements of the water pump before installing. (Input voltage and
frequency of the water pump can be located on the box and sink cover.)
2.Do not place in dusty or humid conditions, under direct sunlight, or near a heat source
such as a room heater.
3. Do not drop or subject to excessive force.
4.Check CPU socket compatibility first.
5.Familiarize yourself with this manual.
6. Do not mix any contaminant with the coolant when filling, for it may cause product
failure.
7. Use of a multiple-outlet power strip is recommended, for you can connect or disconnect
power to the PC and the Reserator 1s pump simultaneously.
Cautions & Warnings
When Installing
1. Always turn on the water pump first before using the system.
2.If the coolant isnt circulating or the pump is making a strange noise, turn off the pc
system immediately.
3.Do not place any object on the product.
4. Install on a flat surface with no vibration or slant; do not tilt or lay horizontally.
5.Use distilled or tap water for coolant, regularly check the amount of coolant, and
replenish as needed.
6.If a leak is found, turn off the system immediately and examine the problem before
using the system again.
7. If the system will not be used for an extended period of time, turn off the water pump.
8. When moving the system, separate the reserator from the PC case before moving.
9. Make sure to not let any air bubbles into the Water Block and tubes while in use.
10. Always check that the water pump is properly functioning.
When in Use


Produkt Specifikationer

Mærke: Zalman
Kategori: Computer køling komponent
Model: RESERATOR 1

Har du brug for hjælp?

Hvis du har brug for hjælp til Zalman RESERATOR 1 stil et spørgsmål nedenfor, og andre brugere vil svare dig