Zebra RS6100 Manual

Zebra Ikke kategoriseret RS6100

Læs gratis den danske manual til Zebra RS6100 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Zebra RS6100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

RS5100/RS6100

Enterprise Hand Mount

Quick Start Guide

MN-004352-02EN Rev. A - 1/2023

ZEBRA and the stylized Zebra head are

trademarks of Zebra Technologies Corp.,

registered in many jurisdictions

worldwide. All other trademarks are the

property of their respective owners.

Zebra Technologies |

3 Overlook Point |

Lincolnshire, IL 60069 USA

www.zebra.com

Warranty

For the complete Zebra hardware product warranty statement, go

to: zebra.com/warranty.

Service Information

Before you use the unit, it must be configured to operate in your

facility’s network and run your applications.

If you have a problem running your unit or using your equipment,

contact your facility’s Technical or Systems Support. If there is a

problem with the equipment, they will contact the Zebra Global

Customer Support at zebra.com/support.

For the latest version of this guide go to:

zebra.com/support.

Additional Information

For information on using the RS5100 or RS6100, refer to the

corresponding product guide available at: zebra.com/support.

Enterprise Hand Mount

The Enterprise Hand Mount allows the RS5100/RS6100

to be worn on the back of your hand and provides a

remote finger trigger. The hand wrap is available for

right-handed and left-handed users and in multiple sizes,

distinguished by the color of the stitching:

•Small = white

•Medium = black

•Large = blue

To attach the Enterprise Hand Mount:

1. Install the hand wrap to the mount, noting the position

for right or left-handed user.

2. Position the hand mount on the hand.

3. Install the scanner onto the mount.

Install Hand Wrap for a

Right-Handed User

To install the hand wrap to the mount for a right-handed

user:

1. Insert the trigger cable and button through the trigger

slot.

2. Insert the mount strap through the left slot of the mount

(as it sits on your hand) and slide under the mount.

3. Insert the mount strap up through the remaining slot of

the mount and fasten the strap end.

Install Hand Wrap for a

Left-Handed User

To install the hand wrap to the mount for a left-handed

user:

1. Insert the trigger cable and button through the trigger

slot.

2. Insert the mount strap through the right slot of the

mount (as it sits on your hand) and slide under the

mount.

3. Insert the mount strap up through the remaining slot of

the mount and fasten the strap end.

Position Hand Mount on Hand

To position the hand mount on the hand:

1. Slide your hand through the hand wrap, with your

thumb through the smaller opening and remaining four

fingers through the larger opening. Note the position for

a left or right-handed user.

2. Adjust the strap to a comfortable position to fit

securely.

3. Slide the strap through the buckle and secure the end

of the strap in place.

NOTE: The snap under the strap is a safety

breakaway and is not used to secure the strap.

4. Position the finger trigger button to allow access by

your thumb and fasten it in place.

5. Align the mount on the hand wrap:

a. Lift the mount strap.

b. Detach and lift the mount.

c. Reposition the mount on the hand wrap to align the

mount with your middle finger knuckle.

d. Fasten the strap.

Install RS5100/RS6100

To install the scanner onto the Enterprise Hand Mount:

1. Align the contacts on the scanner with the contacts on

the mount and engage the slot on the scanner (located

at the top of the scanner on the backside) with the

opening at the top of the hand mount.

2. Push down on the scanner to snap into place.

Correct Installation

Incorrect Installation

Detach RS5100/RS6100

To detach the scanner from the Enterprise Hand Mount:

1. Press the release buttons on both sides of the mount.

2. Lift the scanner off the mount.

Cleaning the Hand Wrap

Before cleaning the hand wrap, remove the electronics:

1. Unfasten the strap and detach the mount.

2. Slide the mount off the strap.

3. Remove the finger trigger button and cable from the

hand wrap.

4. Use an approved cleaning agent or mild detergent on

the hand wrap material only and air dry.

Produkt Specifikationer

Mærke:	Zebra
Kategori:	Ikke kategoriseret
Model:	RS6100
Type:	Bærbar stregkodelæser
Bredde:	66.6 mm
Dybde:	32.7 mm
Højde:	21 mm
Vægt:	76 g
Produktfarve:	Grey, Yellow
Batterikapacitet:	735 mAh
Batteriteknologi:	Lithium-Ion (Li-Ion)
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Driftstemperatur (T-T):	-30 - 50 °C
Scanner type:	2D
Forbindelsesteknologi:	Trådløs
Near Field Communication (NFC):	Ja
Strømkilde type:	Batteri
Sensortype:	LED
Bølgelængde:	515 nm
Pitch læsningsvinkel:	-60 - 60 °
Yaw læsningsvinkel:	-60 - 60 °
Understøtter lineær (1D) stregkoder:	Codabar, Code 11, Code 128, Code 39, Code 93, GS1 DataBar, MSI
Understøtter matrix (2D) stregkoder:	Aztec Code, Composite Codes, Data Matrix, Han Xin, MaxiCode, Micro QR Code, MicroPDF417, PDF417, QR Code, TLC-39
Optisk sensoropløsning (B x H):	2688 x 1520 pixel