AFX Grace GRCP07CBBK Manual

AFX Lys Grace GRCP07CBBK

Læs gratis den danske manual til AFX Grace GRCP07CBBK (1 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 23 anmeldelser. Har du et spørgsmål om AFX Grace GRCP07CBBK, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

E12 door Luminaires In

Ceiling Mount - Pendant

120VAC 60Hz/

Page 1 of 1 R0 8061537

Model #: GRCP07CBBK

Limited Factory Warranty

AFX Inc. hereby warrants that this xture is free from defects in materials and workmanship when installed and used under normal operating conditions for a period of 5 years

from date of purchase. This warranty covers all component parts and extends only to replacement of defective xture or components; it does not cover failure due to improper

installation, misuse, mishandling or damage incurred in transit.

Safety Precautions

 Read all safety precautions and installation instructions carefully before installing or servicing this xture. Failure to comply with these instructions could result in potentially fatal

electric shock and/or property damage.

 It is recommended that a qualied electrician perform all wiring. This xture must be wired in accordance with all national and local electrical codes.

 Do not handle any energized xture or attempt to energize any xture with wet hands or while standing on a wet or damp surface or in water.

 This xture is designed for use in a 120 , 60Hz circuit. VAC 50/

 Make sure that the power source conforms to the requirements of the xture. (See labels on the xture housing).

 To reduce the risk of electrical shock, and to assure proper operation, this xture must be adequately grounded. To accomplish proper grounding, there must be a separate ground

wire (green) contact between this xture and the ground connection of your main power supply panel.

 This xture is intend neral indoor lighting in dry or damp locations. ed to be used for ge

Assembly Instructions

Step 1 Preparing for installation–

A. at fuse or circuit breaker box before installing or servicing any part of this Disconnect electrical power

xture.

B. Carefully remove the xture from the carton, remove components from hardware kit.

C. Remove mounting bracket (1) from the xture (3) by removing two side screws (4).

D. Install mounting bracket (1) to the junction box (not included) using two screws (2) to secure it.

E. Determine drop height to assemble stems section. The stems included are two sets of three 12” long and

two 6” long. Assemble stems to the fixture (3) as needed to achieve desired drop height. It is easier to

feed xture power wires through each stem prior to connecting them together. Turn clockwise to tighten

and secure it to the canopy. This xture is suitable for slope ceiling.

Wiring All wiring must take place inside junction box (not included) –

Caution: Make sure power is o at fuse or circuit breaker box. Check power wires for damage or

scrapes. Use wire suitable for at least 90°C (194°F). Most dwellings built before 1985 have supply Note:

wire rated to 60°C. Consult a qualied electrician to ensure correct branch circuit conductor before

installing.

Step 2 Wiring xture –

A. Make all wire connections to appropriate wire. Secure with wire nuts (provided).

B. Connect the green wire from the xture to the supply power source ground wire.

C. Connect the white wire from the xture to the white (N) wire from supply power source.

D. Connect the black wire from the xture to the black (L) wire from supply power sourc e.

E. ll on each wire lead to make sure connections are secure. Make certain no bare Do not mix wires. Pu

wires are exposed outside of wire connectors. Tuck all connections neatly into the junction box.

Step 3 Mounting –

A. Install xture by aligning both side holes over the mounting bracket then using two screws (4 to (3) (1) )

secure it.

Step 4 Lamping (not included)–

A. Install candelabra base (E12) type lamp under 40W max rating into socket and twist clockwise rotation

until securely snug. Repeat until all three lamps are installed.

Step 5 Restore power at fuse or circuit breaker box –

View shown for reference

only. Individual models may

vary.

Produkt Specifikationer

Mærke:	AFX
Kategori:	Lys
Model:	Grace GRCP07CBBK

Har du brug for hjælp?

Hvis du har brug for hjælp til AFX Grace GRCP07CBBK stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lys AFX Manualer

AFX SPARKLING-PRO Manual

25 Juli 2025

AFX SPOT-240LED-FC Manual

25 Juli 2025

AFX ThunderLED Manual

24 Juli 2025

AFX PIXSTRIP-C Manual

24 Juli 2025

AFX WATERBAR Manual

24 Juli 2025

AFX LF200-NW Manual

24 Juli 2025

AFX SPOT60LED Manual

24 Juli 2025

AFX SPECTRA-TUBES-FC Manual

24 Juli 2025

AFX CHASER-MOVING-BAR Manual

23 Juli 2025

AFX HYBRID180 Manual

23 Juli 2025

Lys Manualer

Nyeste Lys Manualer

Cotech K-NCF-LN10W Manual

1 August 2025

Godox LA200R Manual

1 August 2025

Cotech A60I-047M0-027 Manual

1 August 2025

Cotech FIB75600v1-pt Manual

1 August 2025

1 August 2025

1 August 2025

1 August 2025

1 August 2025

1 August 2025

1 August 2025