Aguilar Tone Hammer Preamp Manual

Aguilar Modtager Tone Hammer Preamp

Læs gratis den danske manual til Aguilar Tone Hammer Preamp (3 sider) i kategorien Modtager. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Aguilar Tone Hammer Preamp, eller vil du spørge andre brugere om produktet?

Side 1/3
Tone Hammer Preamp
The Tone Hammer Preamp is the ultimate tone-shaping tool, offering a fully
sweepable midrange with bass and treble controls for precise tonal shaping
and studio-quality EQ. It features a pristine D.I. with pre/post switching and
ground lift, ensuring maximum flexibility in any setting. With an independent
Drive control and footswitch, you can easily dial in added saturation and grit for
tube-amp inspired tones built-in headphone output and auxiliary input, . With it’s
on stage, or in the studio.
Features
Three band EQ w/ Bass, Midrange, and Treble controls
Fully Sweepable Midrange
Drive Control for Tube-like Punch and Saturation
Studio Quality DI with Pre / Post and Ground Lift Controls
Headphone Out and Aux In for Silent Practice
Owner’s Manual
Manual Version 1.1
Functions
A . Top Panel:
Gain Controls input sensitivity level
Treble - - 18 dB @ 4 kHz +/
Mid Level - - 17 dB of cut or boost +/
Mid Freq 180 Hz to 1 kHz
Bass - - 18 dB @ 40 Hz +/
Drive Adjusts an additional gain structure and EQ curve to enhance
saturation while shaping the tone with a tube amp-inspired EQ. As you
increase the gain, the bass tightens, the treble smooths, and the
midrange focuses for a more refined, responsive sound. The higher you
push the gain, the more saturated and dynamic the tone becomes. This
control works interactively with the Gain knob, allowing you to fine -tune
and experiment to achieve your perfect sound.
Volume Controls output level
Engage - Toggles between on / bypass (blue LED indicates on)
Drive Engages the Drive control
Headphone Mix Control mix of bass signal and aux-in headphones
B. Top Side Panel:
In - 1/4 " input
Aux In 1 aux input for music device /8
Out 1/4 output
Headphones Out 1/8" headphones output
DC IN 18v. This is a standard 2.1mm DC jack. The center terminal polarity
is negative.
C. Left Side Panel:
DI Out - XLR balanced DI out
Pre / Post Control Pre: Your signal goes to the DI XLR output before your
Gain and EQ settings. Post: Gain, EQ, and Master settings will be sent to
the DI XLR output jack.
Ground Lift Control If there is a hum when using the DI there may be a
ground loop. In many cases pushing in the Ground / Lift button can fix this
problem.
D. Specifications:
Current Consumption:…………….. 36 mA
Input Impedance:…………………..1 mega Ohm


Produkt Specifikationer

Mærke: Aguilar
Kategori: Modtager
Model: Tone Hammer Preamp

Har du brug for hjælp?

Hvis du har brug for hjælp til Aguilar Tone Hammer Preamp stil et spørgsmål nedenfor, og andre brugere vil svare dig