Atdec AWMS-HX40-H-B Manual

Atdec Flad panel støtte AWMS-HX40-H-B

Læs gratis den danske manual til Atdec AWMS-HX40-H-B (1 sider) i kategorien Flad panel støtte. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Atdec AWMS-HX40-H-B, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

AWMS-2-BT75-H Page 2 of 4

2. Fit clamp to work surface

2.1 Place in desired location

on worksurface.

1. Assemble post to clamp

1.1 Attach post to upper

clamp using the M8x60mm

screws and 5mm hex key.

1.2 Measure the worksurface

thickness and choose the

suitable lower clamp position.

1.3 Attach lower clamp to upper

clamp in the suitable position using the

M8x16mm screws and 5mm hex key.

2.2 Screw in both pressure plates

and tighten evenly and rmly.

2.3 Remove clips & covers from post by

sliding up & out or by squeezing sides.

SQUEEZE

to release

75mm

100mm

75mm

100mm

For 75mm VESA

unscrew 5mm to

access top holes

Option A

Attach VESA plate with

M4x10mm screws.

Option B

For recessed VESA

use 10mm spacers and

M4x20mm screws.

3.1 VESA compatibility.

NOTE:

Some displays require the

use of a VESA adapter

before attaching the

VESA plate. This VESA

adapter may ship in the

box with the display.

Consult your display’s

installation guide for

further information.

3. Attach VESA plates to displays

TOP

Top Middle Bottom

Top

Middle

Bottom

0 - 38mm (0 - 1 ”) ½

11 - 53mm ( ” - 2  ”)

25 - 68mm (1” - 2 ”)

Note: If there is only a small gap behind the

worksurface perform Step 2.1 before this step

Mounting

surface

5mm

Hex key

4. Slide brackets onto post and set height

4.1 Tilt bracket must only be attached with display

facing the front of the mounting surface.

WORK

SURFACE

WORK

SURFACE

BACK of desk

FRONT

INNER GUIDE

in rear post

channel

VIEW FROM ABOVE

Produkt Specifikationer

Mærke:	Atdec
Kategori:	Flad panel støtte
Model:	AWMS-HX40-H-B
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Panel montering grænseflade:	75 x 75, 100 x 100 mm
Husmateriale:	Aluminium
Monteringstype:	Skrivebord
Nem at installere:	Ja
Højdejustering:	Ja
Hældningsvinkelområde:	-35 - 55 °
Montering:	Klemme
Inklusiv klemme:	Ja
Panoreringsområde:	-90 - 90 °
Maksimal vægtkapacitet:	16 kg
Hældningsindstilling:	Ja
Maksimal skærmstørrelse kompatibilitet:	- "
Orientering:	Landskab/portræt
Antal understøttede skærme:	1
Minimal skærmstørrelse kompatibilitet:	- "
Montering interface kompatibilitet (min.):	75 x 75 mm
Montering interface kompatibilitet (maks.):	100 x 100 mm
VESA-beslag inkluderet:	Ja
Forlængelsesarm (max.):	597 mm
Maksimal vægtkapacitet (pr. skærm):	1 kg
Justerbar dybde:	Ja