Atlas Sound PD-30T Manual

Atlas Sound Højttaler PD-30T

Læs gratis den danske manual til Atlas Sound PD-30T (2 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Atlas Sound PD-30T, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333

FAX (800) 765-3435 AtlasSound.com 1/2

PD-30 Series

High Efﬁciency 30-Watt Compression Drivers

General Description

Models PD-30, and PD-30T are fully environment-resistant for indoor or

outdoor application and are recommended for use in expansive and/or high-

ambient sound-level areas. Units have a power rating of 30 Watts, a 1.5"

voice coil and a plane wave frequency response of 300Hz–3.9kHz (±5dB).

Model PD-30 has a nominal impedance of 8 . Transformer-equipped Ω

Model PD-30T incorporates the exclusive Atlas Sound Vari-Tap® Control/

Connect Center with a screwdriver selectable /Watts switch. This time Ω

saving configuration eliminates the soldering iron as an installation tool.

The integral 70.7V line matching transformer is varnish impregnated

for maximum environment-resistance and life expectancy. It also

includes a protective terminal cover with built-in strain relief to assure

secure cable connection.

Models PD-30, and PD-30T are terminated in standard 1

3⁄8"–18" thread

male couplings for use with screw-on horns, or with Atlas Sound Model

DA-FH adapter for bolt-on type horns. All Series Models feature die-cast

housing, finished in grey baked epoxy.

Speciﬁcations

PD-30

Power Rating 30 Watts @ 8 Ω

Plane Wave

Freq. Response 300Hz - 3.9kHz (±5dB)

Low Freq. Limit@

Full Power 500Hz

Sensitivity 113.6

Impedance 8Ω

Voice Coil 1.5" (32mm)

Height 4.5"(114mm)

Diameter 4.5" (114mm)

Weight 3 lbs.(1.4Kgs.)

PD-30T

Power Rating 30 Watts @ 70.7V

Plane Wave

Freq. Response 300Hz - 3.9kHz (±5dB)

Low Freq. Limit@

Full Power 500Hz

Sensitivity 113.6 (avg), 300Hz - 3.9kHz (±5dB)

Impedance 45Ω Ω Ω Ω Ω Ω Ω, 89 , 167 , 333 , 666 , 1300 , 2500

Power Taps 1.8W, 3.7W, 7.5W, 15W, 30W

Voice Coil 1.5" (32mm)

Height 4.5"(114mm)

Diameter 4.5" (114mm)

Weight 4.75 lbs.(2.1Kgs)

*Measured on a plane wave tube at 1W/1M

PD-30T

Features

• Outstanding Sound Reproduction and Power-Handling for Signaling,

Music and Public Address Systems

• Offered in 8Ω 70.7V Transformer Equipped Models

• Extended Frequency Response Range for Optimum Intelligibility

• 30 Watt Power Rating

• Environment-Resistant Construction for Indoor/Outdoor Use

Applications

Atlas Sound Models PD-30, and PD-30T are versatile, medium-power

compression drivers designed for maximum efficiency and extended

heavy-duty performance. Combined with Atlas Sound horns, PD Series

Models offer quality and durability to assure optimum penetration and

excellent intelligibility in professional and commercial audio systems.

Units are ideal for commercial sound, signaling and public-address

systems in applications such as manufacturing, recreation and sports

facilities, exhibit halls, commercial centers, shipping and transportation

terminals, malls, storage areas, and warehouses, etc.

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333

FAX (800) 765-3435 AtlasSound.com 2/2

Architect and Engineer Speci ﬁ ca tions

Compression driver unit shall be Atlas Sound Model _____PD-30

& PD30T or approved equal. Full range integrated speech and music

program handling capacity shall be 30 Watts, above the low frequency

cut-off of the projector horn.

Rated frequency response shall be __________ Hz (±5dB) measured on

a plane wave tube at 1W/1M. Low frequency limit at full power shall be

_____ Hz. Sound pressure level output capability shall be 113.6dB (avg.)

300Hz - 3.9kHz (±5dB) measured on a plane wave tube at 1W/1M.

Driver with enclosed terminal shall be capable of standard indoor/

outdoor use and be fully environment-resistant. The units shall terminate

in the industry standard 13⁄8"–18 thread pattern and a .707" throat.

Diaphragm shall be field-replaceable and shall be high-temperature

molded phenolic with a roll-type, flex-point suspension.

Model PD-30 shall have a nominal impedance of 8 . Unit PD-30T shall Ω

be equipped with a 70.7V transformer having power taps of 1.8, 3.7, 7.5,

15 and 30 Watts.

Impedance and power taps shall be clearly identified and referenced on

the unit.

NOTE: Plane wave tube measurements provide resistive loads to test drivers.

Actual frequency response of a driver / horn combination will vary depending on

the horn used with the driver. Consult individual horn specification sheet for typical

horn frequency response.

Frequency (Hz) Octave Smoothing = 30.0%

Ohms

PD-30 Impedance

Produkt Specifikationer

Mærke:	Atlas Sound
Kategori:	Højttaler
Model:	PD-30T

Har du brug for hjælp?

Hvis du har brug for hjælp til Atlas Sound PD-30T stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Atlas Sound Manualer

Atlas Sound HT327 Manual

9 Juni 2025

Atlas Sound IP-8SM Manual

28 December 2024

Atlas Sound IP-SDM Manual

21 August 2024

Atlas Sound M1000-W Manual

21 August 2024

Atlas Sound I8SM+ Manual

21 August 2024

Atlas Sound PM8GD-B Manual

21 August 2024

Atlas Sound SMA-15 Manual

21 August 2024

Atlas Sound GD87W Manual

21 August 2024

Atlas Sound DT22 Manual

21 August 2024

Atlas Sound All Weather SM63T Manual

21 August 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Hertz Cento CPK 690 Manual

13 September 2025

Adam T7V Manual

12 September 2025

Klipsch Flexus SURR 100 Manual

12 September 2025

Klipsch Detroit Manual

12 September 2025

Adam A3X Manual

12 September 2025

Adam A7X Manual

12 September 2025

Focal 1000 IW6 Manual

12 September 2025

QSC SC-423C Manual

11 September 2025

QSC AcousticDesign AD-S282H Manual

11 September 2025

Monitor Audio Bronze 200 AV 5.1.2 Manual

11 September 2025