Atlona AT-HDR-MX1616 Manual

Atlona bryter AT-HDR-MX1616

Læs gratis den danske manual til Atlona AT-HDR-MX1616 (8 sider) i kategorien bryter. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Atlona AT-HDR-MX1616, eller vil du spørge andre brugere om produktet?

Side 1/8
1
Installation Guide
AT-HDR-MX1616
4K HDR HDBaseT Matrix Switcher
AT-HDR-MX1616
The Atlona AT-HDR-MX1616 is a 16x16 HDMI
®
to HDBaseT matrix switcher for high dynamic
ma sampling, and data rates up to 18 Gbps.
IMPORTANT: Visit https://atlona.com/product/at-hdr-mx1616 for the latest rmware
updates and Installation Guide.
1 x AT-HDR-MX1616
16 x Captive screw connector, 3-pin
1 x IEC Cable
1 x Pair of mounting ears w/screws
4 x Feet w/screw
1 x Installation Guide
Package Contents
2
Installation Guide
AT-HDR-MX1616
Panel Descriptions
AT-HDR-MX1616
21 3 5 6 7 84
109 11 13 14 15 1612
OUTPUT
ENTER
123
4
ON
ANALOG
L R
IR
L R
L R
L R
L R
L R
L R
L R
L R
L R
L R
L R
L R
L R
L R
L R
INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT
INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT INPUT
OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT
OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT
ON
OFF
LAN RS- 32 IR EXT ED D
ETHERNETRE ET
AC 100-240V
50/60Hz
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
IR OUT
1 2 3 4
5 6
7
8 9
10 11 12 13 14 15 16
ANALOGIR
ANALOG
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
ANALOGIR
1 Front Panel Display
Front panel display will show the on-
screen menu for routing.
2 Selection Buttons
Use to route inputs and outputs via the
OSD.
3 HDBaseT OUT
Connect PoE compatible receivers to this
port.
4 HDMI OUT
Connect an HDMI display to this port. This
port is mirrored and will display the same
content as the HDBaseT OUT port.
5. INPUT
Connect an HDMI source to this port.
6 AUDIO OUT
Connect the included 3-pin captive screw
connector between this port and an
amplier.
7 IR
Connect an IR receiver or control system
to this port for remote device control.
8 Reset
Press and hold for 5 seconds to reset the
IP mode to DHCP or press and hold for
15 seconds to reset the unit to factory
settings.
9 ETHERNET
Connect an RJ45 cable to this port to
a network switch or source for Ethernet
pass through. When connected to a
network switch, Ethernet will pass to
compatible remote HDBaseT receivers.
10 LAN
Connect an RJ45 cable to this port for
TCP/IP and Web Server control of the
matrix.
11 RS-232
Connect to an RS-232 device or control
system.
12 IR EXT
Connect to an IR Receiver for use with an
IR remote.
13 EDID
Use to manually set the EDID mode for
the unit.
14 IR OUT
Connect IR transmitters to these ports for
local device control.
15 AC 100-240V 50/60Hz
Connect the included IEC cable from this
port to a wall to power the unit.
8
149 10 11 12 13
3
4
5
6
7
15
21


Produkt Specifikationer

Mærke: Atlona
Kategori: bryter
Model: AT-HDR-MX1616

Har du brug for hjælp?

Hvis du har brug for hjælp til Atlona AT-HDR-MX1616 stil et spørgsmål nedenfor, og andre brugere vil svare dig