Audio-Technica AT8688 Manual


Læs nedenfor 📖 manual på dansk for Audio-Technica AT8688 (2 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 19 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/2
ANTI-SHOCK MICROPHONE STAND
- Heavy die-cast construction and non-slip bottom pads minimize
coupling of surface vibration to the unit.
-Low-proledesignwithlow-reectanceblacknishforminimum
visibility.
-Theimprovedtightermicrophonesocketforreducetheswingof
the microphone.
There are two models for application - AT8688 / AT8688S. Combin-
ing technical and artistic features in the design, the microphone
standsnd theirvariousapplicationsinthe eld ofbroadcast and
communications.
Thetwomodels come with a low reflectance, matte-black finish.
The AT8688 features a 3-pin XLRF type receptacle on the input port
and 3-pin XLRM type receptacle on the output port. Both recepta-
clesaregold-platednish.TheAT8688Salsofeaturesaphantom-
powered mute switch with a LED indicator that meets stringent
audio transmission requirements and adapts to various types of
microphone.
MOUNTING / CONNECTIONS:
1. Insert a microphone into microphone stand while pressing the top
connector.
2. Connect XLRF-3 side of the cable to the stand and the other side
to your equipment.
3. To remove the microphone, pull out the microphone while
pressing the release tab of the XLRF circular connector of the
microphone stand.
Note thatthemicrophonestandcouldbreakandcauseaninjuryif
it is dropped.
FORM No. ATGC-L0181-11-E
MachidaTokyoJapan
MECHANICAL SPECIFICATIONS
MIC ATTACHMENT XLRF-type,
XLRM-type
XLRF-type,
XLRM-type,
Switch with LED
DIMENSIONS
WIDTH
DEPTH
HEIGHT
91 mm
132 mm
38 mm
91 mm
132 mm
38 mm
WEIGHT 800 g 840 g
DESCRIPTION
TheseAudio-Technicaanti-shockmicrophonestandseffectively
isolate mounted microphones from impact vibration and
mechanical noise normally transmitted from the surface.
They are intended for use with microphones stood on lecterns,
pulpits, conference tables and similar surfaces. Ideal for use
withgooseneckmicrophonesandotherquick-mounttype
microphones using industrial standard XLRM 3-pin type
connectors.
AT8688S OFF SWITCH
The AT8688S features a newly design press-on/press-off switch
circuit that controls the microphone, the mute attenuation level up to
64dB. The circuitry also operates a light in the switch, powered by
the 24-52V phantom source, to indicate when the mic is “on”.
AT8688S ELECTRICAL SPECIFICATIONS
PHANTOM POWER REQUIREMENTS 24~52V DC, 2 mA typical
INSERTION LOSS* 1.2 dB
OFF ATTENUATION* 64 dB minimum
*150ohmsource,100kohmload


Produkt Specifikationer

Mærke: Audio-Technica
Kategori: Ikke kategoriseret
Model: AT8688

Har du brug for hjælp?

Hvis du har brug for hjælp til Audio-Technica AT8688 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Audio-Technica Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer