Creative C-Horse+ Manual

Creative Hovedtelefoner C-Horse+

Læs gratis den danske manual til Creative C-Horse+ (2 sider) i kategorien Hovedtelefoner. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Creative C-Horse+, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Model No.: EF1060

PN: 03EF106000000 Rev A

WIRELESS BONE CONDUCTION HEADPHONES

WITH MULTIPOINT CONNECTIVITY

QUICK START GUIDE

Overview Wireless Pairing

Volume + Button

Volume - Button

LED Indicator

Magnetic Charging Port

Omni-directional Microphone

Multifunction Button (Power On / O, Play /

Pause, Call / Wireless Connection)

Creative logo are trademarks or registered trademarks of Creative

Technology Ltd in the United States and/or other countries.

Siri is a trademark of Apple Inc., registered in the U.S. and other

countries. All other trademarks are the property of their respective

owners and are hereby recognized as such. All specications are

subject to change without notice. Actual product may dier slightly

from images shown. Use of this product is subject to a limited warranty.

YOUR PRODUCT

creative.com/register

TECHNICAL SUPPORT

creative.com/support

Wireless Pairing

Creative C-Horse+ will automatically initiate

wireless pairing after powering on. If you would

like to manually pair your mobile device with

the headphones at a later time, follow the

instructions below:

1. Press and hold the Multifunction button

for 5s when the headphones are powered o

to initiate wireless pairing

2. On your mobile device, turn Bluetooth on

and select “ ” from the list of C-Horse+ CT08

discovered devices to pair

Multipoint Pairing

1. Disconnect the headphones from the rst mobile

device. The headphones will automatically

initiate wireless pairing upon disconnection

2. On the second mobile device, select the

headphones again from the list of discovered

devices to pair

3. Upon successful pairing to the second mobile

device, reconnect the rst mobile device to the

headphones to complete Multipoint Pairing

Multipoint connection is established when the above

steps are performed successfully and Bluetooth is

turned on across both mobile devices

Controls

Powering On / O Call ModePlayback Mode

Button Button ButtonAction Action Action

OFF

2s x1 1s

3s x1

Notes: MP3 Player, Voice Assistant, and Low Latency switch can only be triggered when no audio is playing.

Siri Google Assistant

ON OFF

For the full terms and detailed

information on the Warranty, please visit

creative.com/compliance/C_HorsePlus,

or scan the QR code.

Other Information

Please visit creative.com/support/C_HorsePlus

for user guide and safety and regulatory

information.

Registering your product ensures you receive the most

appropriate service and product support available. You

can register your product at creative.com/register.

Please note that your warranty rights are not dependent

on registration.

Creative warrants the included Creative-branded hardware

product (the “Product”) against defects in materials and

workmanship (“Defect(s)”) for twelve (12) months (for the

European Union, twenty-four (24) months (excluding all

wear and tear), subject to certain exceptions as stated in

the EU Directive 1999/44/EC) from the date of purchase.

The Creative Limited Hardware Warranty (the “Warranty”)

does not cover (but not limited to) consumable parts,

such as batteries or protective coatings that, due to their

nature, tend to diminish over time; normal wear and tear,

accidents or misuse. You must provide Creative proof of

original purchase of the Product by a dated itemized

receipt to be eligible for the Warranty. If a Defect arises and

a valid claim is received during the applicable Warranty

Period, Creative will at its sole option, service the Product

at no charge using new or refurbished replacement parts

at our sole discretion. Warranty benets are in addition to

rights provided under local consumer laws.

PRODUCT REGISTRATION

AND WARRANTY

LED Indicators Technical Specications

Headphone Drivers: Bone Conduction Transducers

Frequency Response: 20–20,000 Hz

Microphones: Omni-directional x 1

Audio Codec: SBC

Wireless Operating Frequency: 2402–2480 Hz

Wireless Operating Range: Up to 10m / 33 ft

Voice Assistant Support: Siri and Google Assistant

Built-in Memory Capacity: 8 GB

Supported Music Formats: MP3, FLAC, WAV, M4A, APE

Playtime: Up to 8 Hours*

Charging Time: Up to 2 Hours

Charging Interface: USB-A (Charging and Data

Transfer)

Battery Type: Rechargeable Lithium Polymer Battery

180 mAh 0.666 Wh

Input: 5V 0.5A

Operating Temperature: 0–45°C

Maximum RF Output Power: 4 dBm

Weatherproof IP Rating: IPX7

*Based on moderate volume level. Actual battery life will vary

with use, settings, songs, and environmental conditions

Master Reset

To initiate a Master Reset, enter wireless pairing

mode, then press and hold the Volume + and

Volume - buttons for 3s. Upon completion,

Creative C-Horse+ will play a voice prompt of

“Power O” before powering o.

Master Reset is reserved for cases where users

encounter issues while headphones are in use or

during situations such as: wireless pairing failure,

random LED blinking, or to reset all data.

Wireless Connection

Established

Blinks blue once every 5s

when audio is playing

Blinks blue twice every 5s

when no audio is playing

Alternate red and blue

Wireless Pairing /

Multipoint Connectivity

1 2

Solid blueFully Charged

Low Battery Blinks red every 3s

Solid redCharging

Charging Creative C-Horse+

Ensure that the magnetic charging cable is

securely connected to the headphones’ magnetic

charging port before connecting it to a power

source to charge. If the magnetic charging cable

is not secured or if it is connected incorrectly,

remove the cable, and reconnect it to the

headphones. It is essential for the headphones

to be connected securely and properly to the

charging cable to prevent short circuit when there

is an active current.

Transferring Audio Files

1. Power o the headphones to prepare for data

transfer

2. Connect the magnetic charging cable to the

headphones’ magnetic charging port, then,

connect the other end to an available USB-A

port on your PC or Mac

3. Creative C-Horse+ will be detected as a mass

storage device on your PC or Mac. Drag and

drop the audio les onto the mass storage

device to begin data transfer

4. Once the data transfer is complete, safely eject

the mass storage device from your PC or Mac

Important: Do not disconnect the USB cable while

data transfer is in progress. Disconnecting the USB

cable without safely ejecting the mass storage

device may result in loss of data or damage to the

built-in memory

Produkt Specifikationer

Mærke:	Creative
Kategori:	Hovedtelefoner
Model:	C-Horse+

Har du brug for hjælp?

Hvis du har brug for hjælp til Creative C-Horse+ stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Hovedtelefoner Creative Manualer

Creative BT-W6 Manual

5 Januar 2025

Creative HS-230 Manual

4 Januar 2025

Creative Outlier Go Manual

1 Januar 2025

Creative Outlier Free Manual

14 December 2024

Creative Outlier Free Pro Manual

14 December 2024

Creative HS-220 Manual

14 December 2024

Creative Sensemore Air Manual

14 December 2024

Creative Zen Hybrid Manual

14 December 2024

Creative SXFI AIR Gamer Manual

14 December 2024

Creative JAM V2 Manual

14 December 2024

Hovedtelefoner Manualer

Nyeste Hovedtelefoner Manualer

Trust Nouna 25277 Manual

3 April 2025

PowerLocus P2 Manual

3 April 2025

Sennheiser RS 120-W Manual

1 April 2025

Celly PC2USBCEARPIN Manual

1 April 2025

Celly Ultrasound Manual

1 April 2025

1 April 2025

1 April 2025

1 April 2025

1 April 2025

1 April 2025