Electro Harmonix 720 Stereo Looper Manual


Læs gratis den danske manual til Electro Harmonix 720 Stereo Looper (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 13 anmeldelser. Har du et spørgsmål om Electro Harmonix 720 Stereo Looper, eller vil du spørge andre brugere om produktet?

Side 1/12
1
720
Stereo Looper
Congratulations on your purchase of the 720 looper! Enjoy 720 total seconds of
high-quality, stereo recording time and the ability to store 10 different loops. The
720 looper is packed with features such as reverse and ½ speed effects,
playback fadeout, real-time progress display, and a convenient programmable
second footswitch.
WARNING: Your 720 comes equipped with an Electro-Harmonix 9.6DC-200 power supply
(same as used by Boss® & Ibanez®: 9.6 Volts DC 200mA). The 720 requires at 9VDC 75mA
with a center negative plug. Using the wrong adapter or a plug with the wrong polarity may
damage your 720 and void the warranty.
– – FEATURES
- minutes of loop recording time 12
- 10 selectable independent Loops that remain in memory until you erase them ,
- High quality uncompressed audio: -bit A/D/A, 44.1k Sample Rate 24 Hz
- Undo-Redo function (also available via optional footswitch)
- Reverse and ½ speed effects at the touch of a button or a footswitch tap
- Footswitch selectable for Stop or Effects
- Handy playback progress mode with seek function
- Unlimited overdubbing
- Optional external footswitch control for selecting loops and Undo/Redo
- Adjustable fadeout (trails) time
- Programmable looping order: REC/PLAY/DUB or REC/DUB/PLAY
- AC adaptor included or may be battery powered
2
– – CONTROLS and INDICATORS
LEVEL Knob Controls the output level of the L being played. Your dry oop
signal remains at unity signal level from input to output. The dry signal also
remains analog throughout the . 720
LOOP Footswitch e the LOOP footswitch to record, overdub, and playback Us
loops. The LOOP footswitch can also be used to stop and undo-redo loops. See
the on page 5 to learn how to use this footswitch to QUICK START GUIDE
create loops.
STOP/FX Footswitch The STOP/FX footswitch can be set to either STOP
mode or FX mode. Select either mode by pressing and holding the PUSH:
MODE STOP button for 2-seconds. When in mode, a DOT appears on the
display next to the STOP label. When in mode, the DOT is off.FX
REC LED Indicates when a loop is being recorded or overdubbed.
PLAY LED Indicates when a loop is being played or overdubbed.
MEM LED Indicates loop audio i in memory for the current loop bank.s
LOOP Knob and PUSH: MODE Button The LOOP knob has no pointer
because it is attached to a rotary encoder that can be continuously rotated in
either direction. This knob also has a PUSH: MODE button with two functions: 1)
to cycle through one of three available modes, and 2) once a mode is selected,
to adjust the value of that mode from 0-9. All modes and values are shown on
the digit display.
SELECTING/ ADJUSTING MODES The 3 selectable modes are toggled on and
off by pressing the MODE button once. When mode-select is active, the digit
display will flash the currently selected mode. Turn the LOOP knob to cycle
through the three possible modes:
L = Loop Select
p = Loop Progress
F Fadeout Time =
When you arrive at the mode you would like to adjust, press the MODE button
once to select the mode. display will stop flashing aThe nd it will show the
selected mode value from 0-9. The selected mode can now be adjusted with the
LOOP knob from 0- 9.


Produkt Specifikationer

Mærke: Electro Harmonix
Kategori: Ikke kategoriseret
Model: 720 Stereo Looper

Har du brug for hjælp?

Hvis du har brug for hjælp til Electro Harmonix 720 Stereo Looper stil et spørgsmål nedenfor, og andre brugere vil svare dig